Question about HP Officejet 2620 All in One Printer

Open Question

Hp 2620 goes to save mode rather than print mode and can't print tried control P no go tests print out and shows all else ok just want to print

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
mspcrepair
  • 169 Answers

SOURCE: hp psc 1210 not working in vista - but diagnostic utility shows all ok - and prints test page

Here is the full-write up on the HP PSC1210. Read through this thoroughly to ensure that you follow all the steps to make it work in Vista, since there is no Vista native driver.

Hope this helps - remember to rate :)

Posted on Oct 02, 2008

Ad
  • 1 Answer

SOURCE: My Brother MFC 210 C printer will not print in yellow.

i cannot print the documents that i want ,,the printer cannot recieved the documents but it can copy.

Posted on Jun 25, 2009

cene765
  • 787 Answers

SOURCE: will not print with black ink, tried uninstall

The black print cartridge is clogged or empty.Replace black cartridge.In color settings printer prints with both cartridges.

Posted on Dec 01, 2009

  • 41 Answers

SOURCE: My HP Officejet is showing paper jam. I have

Yes hold down power button for a second or two and it will reset. Good luck

Posted on Oct 31, 2010

Ironambre
  • 65 Answers

SOURCE: HP Photosmart C6280 is turned

Uninstall printer and then reinstall with new drivers, most likely the printer drivers are corrupted

Posted on Jun 09, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Officejet 2620 wont print


officejet-2620-wont-print-y13dyhqwvx3v0ofgq2ijabns-1-0.jpg

I Have hp office jet 2620 its working perfect.
every time when i ON the printer every time its print alignment page and then ask to scan it.
How i close this option can any one help me.

Zahid Azeem

Feb 03, 2014 | HP Office Equipment & Supplies

1 Answer

Hp 6210 officejet all in one ... want to test scanner only. Took 16 hour tech assist to download (software was not provided by work associate). Ink cartridges do need to be replaced. Want to test the...


yes, you can test the scanner without inks.
use the hp solution center c01810967.gif installed on the computer Double-click the HP Solution Center icon (c01810967.gif ) on your desktop
  • For photos or artwork : Click the on-screen Scan Picture "button" in HP Solution Center.
  • For a text document with or without graphics : Click the on-screen Scan Document "button" in HP Solution Center.
    For the HP Solution Center "button" that you are using ("Scan Picture" or "Scan Document"), set the option to prompt for settings each time you scan, and then click OK .
    • Scan to: Select your scan destination from the drop-down list.
    • File Type: Select the file type from the drop-down list.
    • ...Save Options...: (available only for certain "Scan to" destinations): For example, if you are saving to a file, click this option to select your Save Location .
    • Show preview...: Select this check box if you want to see a preview before the actual scan.
      Click Scan

Jun 05, 2011 | HP OfficeJet 6210 All-In-One InkJet...

1 Answer

Printer will not save photos to computer


For whatever reason, it sounds like the printer cannot communicate with the computer. Check all the wire connections. If all connections are good, try printing a test page using Word. If you can print a test page, that shows everything is workign properly. Next, try uninstalling and reinstalling the software that came with your printer. If you do all these things, that should fix the problem unless there is something wrong with the printer hardware. Good luck.

Jul 06, 2009 | HP Photosmart C5180 All-In-One InkJet...

1 Answer

HP DESKJET380 NOT RESPONDING WHEN CLICK ON PRINT


After sitting in power save mode for a long period of time the printer might not function properly. This happens when the printer is plugged into a surge protector. Unplug from the surge protector and plug directly into the wall power socket.


Step 1:

Please try to print Self test Print from the Printer (without PC ie. remove the USB cable from the PC)

Step 2:
If the Self test Print is Ok, try to connect your printer to PC
and Print Test Page
Go to Start >> Printers and Faxes >> Select your Printer F380
then Right click Properties and Click on "Print Test Page"
If this prints Ok then all the connections you have made are correct
In case, it does not print then please check your USB cable try to change it

Step 3:
You can uninstall your Driver
and install the new driver, to download the driver for F380 All in One Printer Please click the below link
Choose appropriate Operating System
HP F380 All in One Printer Driver

I hope this will resolve your problem
all the best




Jan 05, 2009 | HP DeskJet F380 All-In-One Printer

1 Answer

CM 1015 has hazy background.


Have you tried the cleaning Mode, accessible from the control panel? Press 'Menu', then cycle through the options using the arrow keys until you reach 'Main Menu Service'. Press 'OK' This will show 'Cleaning Mode' . Press 'OK' and the printer should start cleaning. Ensure there is a sheet of clean paper in the input tray before you begin.

Oct 29, 2008 | HP LaserJet CM1015 All-In-One Printer

1 Answer

Xerox Phaser 8500 not printing black


Here are the directions to enable and disable Jet Substitution. This may very well help.
Some of the print head jets will not unclog for you. If that does not work then most likely the print head needs to be replaced.

o enable the Jet Substitution mode:
  1. Press the [Up] or [Down] arrow button on the Control Panel to select [Troubleshooting] on the Display Screen, and then press the [OK] button.
  2. Press the [Up] or [Down] arrow button to select [Print Quality Problems], and then press the [OK] button.
  3. Press the [Up] or [Down] arrow button to select [Eliminate Light Stripes], and then press the [OK] button.
  4. If necessary, select [Print Light Stripes Test] to make a Light Stripes Test print that shows any weak or missing jet and its jet number.
  5. Press the [Up] or [Down] arrow button to select [Jet Substitution Mode], and then press the [OK] button.
  6. Press the [Up] or [Down] arrow button to select the color for the weak or missing jet, and then press the [OK] button to select the color.
  7. Press the [Up] or [Down] arrow button to select the number of the weak or missing jet (1 to 309), and then press the [OK] button to confirm the selection.

    NOTE: If necessary, press the [Up] or [Down] arrow button to select [Save Change and Select Another Jet] to substitute more jets.

  8. Press the [Up] or [Down] arrow button to select [Save Change and Exit] and then press the [OK] button to complete the procedure.

To disable the Jet Substitution mode:
  1. Press the [Up] or [Down] arrow button on the Control Panel to select [Troubleshooting] on the Display Screen, and then press the [OK] button.
  2. Press the [Up] or [Down] arrow button to select [Print Quality Problems], and then press the [OK] button.
  3. Press the [Up] or [Down] arrow button to select [Eliminate Light Stripes], and then press the [OK] button.
  4. Press the [Up] or [Down] arrow button to select [Jet Substitution Mode], and then press the [OK] button.
  5. Press the [Up] or [Down] arrow button to select [Turn Jet Substitution Mode Off], and then press the [OK] button.

Feb 16, 2008 | Xerox Phaser 8500/DN Printer

1 Answer

Slow Printing


Hi, The slow printing issue can occure even if the cartridges are out or low in ink try to check the print function by the stand alone unit by printing a self test page Here are the steps to print a self test page: On the front panel of the product, press Menu (or Setup) . Press the Right Arrow until Print Reports displays, and then press Enter, Start, or OK . Press the Right Arrow until Self-Test Report displays, and then press Enter, Start, or OK . If the self test page takes less time to print and if all the color blocks and black block print fine the ink level are fine. if the time for self test is also more try to clean the cartridge contacts and replace the cartridges if needed this will fix the issue. If the printer works fine as stand alone self test and copy try to performe the steps in the below webpage: ========== http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00093466&lc=en&cc=us&dlc=en&product=2512010&rule=10185&lang=en ========== If the issue is still un fixed try to set the print directly settings in the printer properties Click on start >> control panel >> printer and faxes >> there look for the HP printer icon with the check mark and right click on it and select properties and then click on advance tab and under it select the print directly to printer and click on apply and ok to save the settings. Once done try to print and check with the issue. Hope this will fix the issue. Regards, Barret.

Sep 03, 2007 | HP PSC 2175 All-In-One InkJet Printer

Not finding what you are looking for?
HP Officejet 2620 All in One Printer Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...