Question about DISH Network IR Remote Control

1 Answer

How do you set the Dish network 1.5 IR remote with toshiba tv.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • DISH Network Master
  • 5,568 Answers

You didn't mention which model of TV you have but if you dont have the manual for the Dish remote, you can retrieve the codes from their website which would be more current anyhow.
You may not find a codes setting that agrees with your TV if it is a recent acquisition since the manufacturers are changing their codes all the time. You may be able to find one that at least controls some of the Toshiba's functions but don't expect too much. Experience tells me that if you can do at least power and volume control, be happy. This is no, and never will be, a truly 'universal' remote.

Posted on Jul 21, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to set my dish network remote for my panasonic tv


Hello! My name is Becki, with DISH Network. If you have not yet programmed your remote, here are some steps and codes that should work. If not, please let me know!!

1. Hold down the clear TV button until all lights light up at the top of the remote
2. Punch in a 3 digit code (provided below)
3. Press the # (POUND) button
4. Try powering the tv on/off, and the volume. If one or more of these functions do not work, start over from step 1 with a different code

619
765
700


Becki Barned
DISH Network Customer Service
becki.barned@dishnetwork.com

Aug 07, 2011 | DISH Network Ir To Uhf Dish Network Remote...

1 Answer

No sound control: Toshiba T.V. set. ; Hand remote


Hi, Cheri Torres with DISH Network Customer Service. I came across your post and wanted to see if I could help. The information you provided leads me to believe that you will need to address your DISH Network remote to your Toshiba TV. There are a few different codes for each of our different models of remotes. I will list here for you the codes for our more popular models of remotes and also the instructions for addressing your remote to your TV. I hope you find this information useful and if you have any further questions or concerns feel free to email me anytime at Cheri.Torres@Dishnetwork.com and I will be happy to help!

Instructions for addressing the remote to the TV
  1. Turn the Television On
  2. Press and Hold the TV Mode button until all other mode buttons light up red.
  3. Enter the three-digit code using the buttons on the number pad.
  4. Press the pound(#) button.
    Note: The LED will flash three times.
  5. Test functionality with the TV
  6. Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.

Feb 23, 2011 | DISH Network IR Remote Control

1 Answer

I have a nuwire for my remote controls for mulitiple items and i can't get it to work on my dish network system


romaneastwoo,

What type receiver is your TV connected to? Do you know your remote model number - located on back of the remote at the top (ex. 2 digit number 5.3 ir). The majority of our TV 1 remotes work in IR mode. If this universal remote uses UHF frequency, it will not work for the IR frequency. Please let me know your receiver and remote types and I will see if there is anything we can do for this remote.

Ray Calo
DISH Network - Executive Offices

Jan 11, 2011 | DISH Network IR Remote Control

1 Answer

Hi, I bought a lg plasma tv model 55LD520, and now my dish network remote won't work unless I'm literally 2 inches from the reciever. What can I do? Please help


I had the same issue with the 55LD520 and my Dish 722 receiver.
Check out this link for some suggestions:
http://www.satelliteguys.us/dish-network-technical-discussions/193510-ir-remote-1-722-receiver.html

Putting black tape over the receiver IR sensor seems to be working for me.

Sep 05, 2010 | DISH Network IR Remote Control

2 Answers

Program sony remote to operate dish vip722


The Sony RM-YD029 Remote control will work with the Dish Network VIP722 DVR HD Satellite Receiver, but the Dish Network VIP722's Primary remote address must be set to 1.

The procedure below will allow Sony RM-YD029 remote control to operate Dish VIP722.

Using the Dish Network Remote Control -
1. Press menu 2 times to get to system info page
2. In the system info page the primary remote address is in a white box (bubble) followed by a Green TV (1)symbol that says IR and indicates you the channel your remote control one is configured. The Sony RM-YD029 will work when this primary remote address number (in the white box) is set to 1.

If the Primary Remote Address of your VIP722 Remote control 1 is not set to channel 1, here is how to change it:

1. While displaying the system info page, press and hold the SAT button on your dish network remote until all other modes are flashing, about 3 seconds.
2. then press the '1' button on the numeric pad of your dish remote
3. then press the '#' button on the numeric pad of the dish remote
4. then press the 'record' button (red dot button - stores setting)
5. At this point you should see a number 1 in front of the primary remote address on the dish system info page

Ensure you enter the corresponding IR code into your Sony remote control per the instructions in the manual or Sony's web site. My 722 works with Sony IR code - 01775.

Sep 08, 2009 | Sony BRAVIA XBR 52 in. LCD Flat-Panel HDTV

1 Answer

Dish IR Remote 20.0 has problems after sunset.


The problem for me was the TV giving off IR signals that interfered with DISH's poorly designed remote. When the TV's room ambient light sensor was turned on and it became dusk outside the DISH remote would stop working. Moving the receiver away from the TV helps but the problem is not eliminated until the light sensor is turned off.
Until DISH corrects this poor design there may be no other viable solution.

Jul 09, 2009 | DISH Network IR Remote Control

1 Answer

Switch Toshiba projection tv to receive input from video-1?


jbrowne_usa

If your DISH remote is programmed to your Toshiba TV, you can press the TV button at the top left of the remote and then release. This will put the remote in TV mode. Press and release the TV/Video button just below the clear TV button. This will cycle through the inputs on your TV. Continue to press and release until you have Video-1 displayed on your TV screen. I hope this helps.

Ray Calo
DISH Network

Jun 14, 2009 | DISH Network DVR-625 DTV Receiver /...

2 Answers

Need Dish DVR ViP722 remote code.


If you are looking to have the Dish remote operate your TV, just do a random search for your tv. First, hold down the tv button on the dish remote until all the rest of the light up. Next press the tvpower button on the dish remote. Next, press the channel up button (this is the up arrow button) until the set turns off. When it does turn off, press the # key at the bottom right of the remote. The tv button will light and flash twice. That's it. Your done. Hope this helps.

Feb 20, 2009 | Sony BRAVIA XBR 52 in. LCD Flat-Panel HDTV

3 Answers

Cannot control Vip222 with sling classic


I have read elsewhere that Slingboxes required the Dish Network receivers to be set to Primary Remote Address 1.

To try a fix:

Using the Dish Network Remote Control -
1. Press menu 2 times to get to system info page
2. In the system info page the Primary Remote Address is in a white box (bubble) followed by a Green TV (1)symbol that says IR and indicates the channel to which remote control 1 is configured.

If the Primary Remote Address of your Dish VIP722 Remote control 1 is not set to channel 1, here is how to change it:

1. While displaying the system info page, press and hold the SAT button on your dish network remote until all other modes are flashing, about 3 seconds.
2. then press the '1' button on the numeric pad of your dish remote
3. then press the '#' button on the numeric pad of the dish remote
4. then press the 'record' button (red dot button - stores setting)
5. At this point you should see a number 1 in front of the primary remote address on the dish system info page

Ensure you enter the corresponding IR code into your slingbox remote control per the instructions in the Slingbox documentation.

Feb 05, 2009 | Sling Media Slingbox AV Remote Control

1 Answer

Dish network remote with a element tv


Since you dont have a popular brand set you should try using the scan method. Here is a link with a video to help program your dishnetwork remote to work with your set. http://www.disheez.com/videos/dish-network-video/programming-dish-network-remote/

Nov 23, 2008 | DISH Network IR Remote Control

Not finding what you are looking for?
DISH Network IR Remote Control Logo

931 people viewed this question

Ask a Question

Usually answered in minutes!

Top DISH Network Televison & Video Experts

brian soufane

Level 3 Expert

693 Answers

john milligan

Level 3 Expert

512 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a DISH Network Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...