Question about Whirlpool Duet GHW9150P Front Load Washer

2 Answers

Whirlpool washing machine won't spin after rinse cycle

Hello, my whirlpool topload washing machine won't spin after it rinses..it makes this loud noise and struggles as it tries to spin. at first i though it was a bad water pump which i had replaced, but it didn't fix the problem. any suggestions?

Posted by on

  • Anonymous Mar 17, 2014

    does not rinse or spin ' repeats wash cycle

  • Anonymous Mar 19, 2014

    makes a loud banging noise when in first cycle and wont rinse

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 213 Answers

There is a coupling between the motor and transmission that has cracked. with the crack in the coupling the transmission cant spin as fast as the motor causeing the loud noise. replace coupling to solve problem

Posted on Nov 21, 2007

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

No these machines are belt drive. your problem could be caused by a bad door switch as a safety mesure since washer goes into high speeds rpms of 7,000 plus

Posted on Apr 04, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I incorporate a soak cycle into a wash/rinse spin cycle in a whirlpool 9kg toploader **********00


You may be able to let it fill, then turn it off and allow contents to soak. After soaking, you can turn it on again to complete washing.

Mar 14, 2018 | Whirlpool Washing Machines

1 Answer

Washer won't spin after rinse cycle


Hello Dorothy - Does the drain pump make a humming noise? If so, there may be a restriction in the drain line or siphoning. Otherwise since it is such a complex unit I would recommend contacting a professional to have either the pump or timer diagnose.

Sep 29, 2012 | Frigidaire FEX831CS Top Load Stacked...

2 Answers

My Samsung WA75b9 toploader stops when the rinse cycle starts -makes noise but won't rinse or spin!


Hi,
If you are having a problem with your top load washer then check out this tip...

Washing Machine2_bing.gif does not Pump or Spin
http://www.fixya.com/support/r4617986-washing_machine_not_pump_or_spin

If you are having problems with your front load washing machine2_bing.gif then checkout this tip...

Front Load Washing Machine2_bing.gif not draining and or not spinning
http://www.fixya.com/support/r4784376-front_load_washing_machine_not_draining

heatman101

Aug 14, 2010 | Samsung SW62ASP Top Load Washer

1 Answer

Loud banging noise during rinse


Most noises from a washing machine occur during the rinse or spin cycle. If you hear loud thumping during the spin, the load of clothes may have become unbalanced. Stop the washer and redistribute the clothes, then re-start it. Repeat these steps if necessary.This will solve your problem.

Apr 08, 2010 | Whirlpool GHW9100L Front Load Washer

2 Answers

My Whirlpool GHW9250ML is having problems spinning


My Whirlpool Front Load Wasehr Model# GHW9250ML is having problems spinning on the final rinse cycle. The machine shuts down and the letter F appears on the digital read out.

Mar 06, 2010 | Whirlpool GHW9250M Front Load Washer

2 Answers

Washer makes a loud, pulsing, screeching noise with no spinning


With a manufacturing date of 7/15/97, your washing machine is clearly worn out.

Nov 07, 2017 | Whirlpool Washing Machines

1 Answer

Whirlpool Ultimate Care II


sounds like a broken coupling.
it probably don't agitate either.

Oct 28, 2008 | Whirlpool Ultimate Care II LSQ9564J Top...

1 Answer

Whirlpool Ultimate Care Model LSR8233EQO - Loud noise during final rinse/spin


Sounds like the clutch, mi9ne works fine but is noisey when spinning, repair guy said it was the clutch.

Feb 05, 2008 | Whirlpool Ultimate Care II LSQ9564J Top...

2 Answers

Washer makes loud thumping after finished spin cycle


I replaced the drive block and it solved my problem. (thumping noise at the end of spin cycle) Easy repair. Videos on utube show all the steps.

Jun 07, 2006 | Whirlpool LSR7333 Top Load Washer

Not finding what you are looking for?
Whirlpool Duet GHW9150P Front Load Washer Logo

1,220 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Sal De

Level 3 Expert

2696 Answers

yadayada
yadayada

Level 3 Expert

79024 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...