Question about Insignia Televison & Video

1 Answer

Insignia TV, NC-L32Q-10A. Has pwr. No video or audio. It starts with 'Please wait'...nothing comes after that. Just black screen. What part is at fault, so I can change it myself ? Thanks

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Insignia Master
  • 6,694 Answers

Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/
In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
Before going further; try a hard reset first. If it does not help you, replace the main digital board. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; visit the site linked here....

Posted on Dec 25, 2016

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

DerStrom
  • 103 Answers

SOURCE: Damaged Insignia NS-L32Q-10A Screen

The damage actually occurred on the LCD (liquid crystal display) itself, not on the screen. Therefore, when the tv is switched off, no damage is visible. What happens is that when it is turned on, the liquid crystals "leak" because the display is broken. This is why you can see lines and a small dent. Depending on the tv, replacement LCD panels may be sold separately, though chances are that it would cost less to simply buy a new tv. Thanks for your post, and I wish you the best of luck! Sincerely, Der Strom

Posted on Apr 26, 2010

  • 17 Answers

SOURCE: I have a LCDTV NS-L32Q-10A

Unplug the tv from power for 10 minutes to reset.

Posted on Mar 12, 2011

SOURCE: DX-L22-10A quickly shows "please wait"

Contact DYNEX for assistance (Mexico) Be patient...(siesta time...) They will talk you thru a RESET !! (I hope...)

Posted on Dec 29, 2011

gopakumarg43
  • 74106 Answers

SOURCE: I have an tv Insignia NS-L56X-10A power light red on but no video and audio. Please help!!!

Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/
In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
Before going further; try a hard reset first. If it does not help you, replace the main digital board. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; visit the site linked here.

Posted on Sep 09, 2016

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tv wont turn on


does the light stay or blinking and how about the screen display totally black or a white screen. you can see in a dark room if their is a white screen. if totally black screen then with sound the cause is could be bad inverter board or screen back light. if a white screen it was the t-con board not working good.

Oct 04, 2012 | Insignia NS-L32Q-10A 32 in. HD-Ready LCD...

1 Answer

How to connect my laptop to TV


Hello
To connect your TV with laptop, you have to buy one VGA to VGA connector cable. Connect this cable to computers' VGA out ot TVs VGA in. Now you have set the computer to TV, in case of video only. To get audio from your TV, you have to connect the audio out of the computer ot audio in of the TV, which can be located very near to the VGA socket on the back side of your TV,OK.

Feb 16, 2011 | Insignia NS-L32Q-10A 32 in. HD-Ready LCD...

1 Answer

I have a insignia LCD 32'' TV and it have sound but the screen is green please help i use the component blue green and red


It sounds like the RED cable is not connected right, you did not mix the RED for audio right channel RCA plug with the RED component RCA plug? Please verify the RED, BLUE and GREEN cables again just in case, otherwise t can be the source component or the processor inside the TV.
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide

Failed TV and Monitors: http://s807.photobucket.com/home/budm/allalbums

Oct 19, 2010 | Insignia NS-L32Q-10A 32 in. HD-Ready LCD...

1 Answer

Tv picture will not come on


We need to find out if the power supply is putting out 24vdc for the backlight inverter board and 12~16vdc for sound, look for bad caps with leaking/bulging tops first. If you do have all the voltages then the backlight inverter board may be bad.
http://s807.photobucket.com/home/budm/allalbums
http://en.wikipedia.org/wiki/Capacitor_plague
http://www.badcaps.net

Parts: http://www.shopjimmy.com/catalogsearch/result/?q=Insignia+NS-L32Q-10A+

Jun 14, 2010 | Insignia NS-L32Q-10A 32 in. HD-Ready LCD...

1 Answer

Damaged Insignia NS-L32Q-10A Screen


The damage actually occurred on the LCD (liquid crystal display) itself, not on the screen. Therefore, when the tv is switched off, no damage is visible. What happens is that when it is turned on, the liquid crystals "leak" because the display is broken. This is why you can see lines and a small dent. Depending on the tv, replacement LCD panels may be sold separately, though chances are that it would cost less to simply buy a new tv. Thanks for your post, and I wish you the best of luck! Sincerely, Der Strom

Apr 26, 2010 | Insignia IS-LCDTV32 32 in. Television

2 Answers

Used insignia 32 inch with DVD. want to reset


most manafactors codes are 1234 or 0000 or 5555 or 8888 you might have to put extra didget on EG 12345 -00000 - 55555 -88888 but if you changed it sorry dont know

Nov 10, 2009 | Insignia NS-L32Q-10A 32 in. HD-Ready LCD...

1 Answer

How much is a replacement screen for a insignia 32 inch lcd


buy new tv is good lcd panel up $700...and part Not Available

Aug 16, 2009 | Insignia NS-L32Q-10A 32 in. HD-Ready LCD...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Insignia Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74106 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Cindy Wells

Level 3 Expert

5097 Answers

Are you an Insignia Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...