Question about Televison & Video

1 Answer

DMP-BD87 says SET 1 when I hit buttons on the remote. The remote flashes the white light but the unit either responds with "SET 1" or "STOP" for certain buttons.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Televison & ... Master
  • 74,383 Answers

Check the remote control for its infrared emission. Check it with fresh batteries. Check it by pressing all the keys. You can detect the presence of infra-red emission from the remote control, using a cell-phone camera. If you wish to get more details about how to check a remote control, please visit this site. One among the posts has details about it. Surf the site with patience. In some cases, the remote control might need to clean.
http://remotesearch.blogspot.com/
Search the site by type in this key phrase "how to test a remote control "in the "search box at the top right of the display window of the Homepage" to get the related post quickly.
https://youtu.be/wUpnETSm6_k
https://www.youtube.com/watch?v=jsSCNCW3IbQ [open and clean]
https://www.youtube.com/watch?v=Qp-l1uh-5gE [open and clean]

Posted on Dec 23, 2016

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: The TV is not responding

I have just had to send a linsar 40" LCD TV back to john lewis after only 6 months of use after the remote packed up. The remote started working only intermittently then stopped altogther. I also changed the batteries ( twice in fact) without any improvement. After then using the TV for a couple of weeks using the set buttons only, the TV then became difficult to switch on until the point came when it was not possible to switch from standby to on, and the TV stopped working. After speaking to the techies at JL, they advised that there was no cost effecive repair possible and agreed to replace the set. I now have a Samsung.

Posted on Jan 03, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove code set 3 for the remote control panasonic bd-45


It seems the best way to "remove code set" is to overwrite it with a different code set.

(From the Owner's manual for the Panasonic DMP-BD45)
STEP 6 :
Reprogramming the remote control
Change "Remote Control Code" (-> 28) on the main unit and
the remote control (the two must match) if you place other
Panasonic products close together and it responds to this
remote control.
You can operate the TV or amplifier/receiver using the unit's
remote control.
1 For televisions
Input the code (-> 37) with the numbered
buttons while pressing [? TV POWER].
For amplifiers/receivers
Input the code (->37) with the numbered
buttons while pressing
[RECEIVER j VOL].
e.g., 0001: [0] -> [0] ->[0] -> [1]
2 Test by turning on the television or
adjusting the volume of the amplifier/
receiver.

Feb 20, 2016 | Panasonic Televison & Video

1 Answer

Remote codes for XV-HTD520


PDF]XV-BP1 Blu-ray Disc Player INSTRUCTIONS - JVC

resources.jvc.com/Resources/00/01/15/LVT2007-001B.pdf
Check the specification page of this owner's manual to be .... "BD-LIVE" logo is a trademark of Blu-ray Disc .... Some AVCHD discs use the "x.v.Color" format.

Home Electronics Custom Install ' Pioneer Electronics USA

www.pioneerelectronics.com/.../Home-Entertainmen...

Pioneer CorporationProducts from SATA and USB Blu-ray and DVD burners, to on-ear or earbud headphones and USB powered computer speakers. ... Pioneer Receivers, Elite Receivers, Blu-ray Players, DVDs and Speakers. ... Universal Remote Control Files.

Panasonic Product Support - DMP-BD87

shop.panasonic.com > Get Support

PanasonicSmart Network Blu-Ray Disc™ Player DMP-BD87. Details ... Blu-ray Remote Controls.... The remote control for my Panasonic device is no longer functioning.

Jvc xv bp1 blu ray player region free dvd hack - Vaino ...


Dec 21, 2015 | Televison & Video

1 Answer

On the remote I will push the unlock button, then the car's horn honks and unlocks the doors. It also honks when I want to lock it. I am only pushing the lock or unlock button once. I'm not in the...


You can disable the chirp confirmation by using the following procedure

1. Turn the ignition on
2. Turn the ignition off
3. Press the valet switch 5 times, wait for the Status Light to flash twice, the parking lights to flash twice and the horn to chirp twice.
4. Press the valet switch 4 times, the MARS unit will respond with 4 Status Light flashes and horn chirps
5. Press the transmitter START button, the MARS unit will respond with 3 Status Light flashes and horn chirps
6. Turn thr ignition on to exit program mode

May 08, 2011 | Omega MARS-22 Remote Vehicle Starter with...

1 Answer

Liftmaster Professional 1/2 horse model # 41A5483 installed in 02 Learn light flashes 4 times. When openers are hit in cars (2 Chrysler vans use built in Homelink Systems built into sun visors, one car...


check the settings on the unit itself sometimes if you have it set up to come down too rapidly it will cause it stop and go back up because it thinks its hit something.

Apr 10, 2011 | liftmaster Garage Door 1/2 Hp

1 Answer

Can set up th remote control for this tv with the direct tv cable remote


Here's how to scan for TV codes on your DIRECTV remote

1.Make sure your TV is turned on.

2.Slide the mode switch at top of remote to "TV".

3.Press and hold the MUTE button. This is located above the number 1 button.

4.While still holding down MUTE, press and hold the SELECT button until green light at the top of the remote flashes twice.

5.Then enter 991, the green light on remote should flash twice.

5b. Press 1 again (it will flash twice again), then you press the power on button at the very top right.

6.Point remote at TV and press CHANNEL UP button. Tap the CHANNEL UP button repeatedly until the TV powers off.

*If you hit channel up very fast, you risk going past the code. Pressing channel down will back it up. I alway hit channel up very fast till the tv turns off, then back it up slowly till it comes back on.

7.When the TV powers off, press and release the SELECT button.

*Note: If the green light flashes three times before TV responds, then all codes have been cycled through. Our remote controls are guaranteed to program to your DIRECTV receiver, however your TV may not be compatible with our remote control.

Mar 05, 2011 | Curtis LCD2425A TV

3 Answers

I GET SET 1 EVERYTIME I PRESS BUTTON ON CONTROLLER


Set remote to 1 by pressing 1 holding Ok/Enter for 3-5 seconds.

Jan 30, 2011 | Panasonic DMPBD45 BluRay Player

1 Answer

The box is not responding to the remote control every time any button on the remote is pressed the box just displays Set 1


This means that the unit and the remote are on different channels.

The good news is this is a super simple fix!

Hold the OK button and the 1 button on your remote for more than five seconds. After which your BlueRay player should respond to the remote.

Enjoy!
~KenjiFox

Jan 07, 2011 | Panasonic DMP-BD45 Player

1 Answer

LIGHTS ON CONTROLLER FLASHES BUT WONT RESPOND


you have to reconnect it. Click the home button on your remote click connection settings, and hit reconnect. Then press 1 and 2.

Mar 10, 2010 | Nintendo Wii Console

2 Answers

I need to be walked through installing a Bulldog self learning anti theft bypass module 791 on 2007 GMC Sierra 2500 HD SLE. Thanks!


Here have information about #791 bypass module: Bulldogsecurity Model791

IF YOUR REMOTE STARTER IS CLICKING AND/OR FLASHING THE PARKING LIGHTS AND IS NOT RESPONDING TO THE REMOTE, IT IS IN SAFE MODE AND NEEDS TO BE INITIALIZED BY DOING THE FOLLOWING:
If you have a 4 button remote, you must ground the black/blue hood pin wire (raise hood if hood switch is installed). Apply 12volts to blue/black brake wire (press and hold brake pedal if wire is installed). Press and hold any button on your remote until clicking and flashing stops. Unit will now respond to the remote. Remove ground from hood pin wire and voltage from brake wire. If you have a 2 button remote, hold brake and press any button on the remote until clicking and flashing stops.

ADDENDUM
If you have an RS1100 or RS1200 and your vehicle runs for several seconds, shuts off, restarts, runs, and shuts off again, perform the following step: Connect the Black/White tach wire (from the 16 pin plug) to the heavy gauge White Ignition 1 wire and program the unit for Tach Mode (bottom of page 19).

Witch model alarm have your vehicle?

Good luck.

Mar 10, 2010 | GMC Sierra 2500HD Cars & Trucks

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74383 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...