Question about Office Equipment & Supplies

1 Answer

Canon Pixma ip1300 Ink absorber is saying is full what is the easiest way to solve this problem

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    MVP:

    An expert that gotĀ 5 achievements.

    Master:

    An expert who has achieved Level 3.

    Sergeant:

    An expert that hasĀ over 500 points.

  • Master
  • 226 Answers

Open printer. with gloves or unless you don't mind getting your hands dirty, Open top of printer lid, carefully, pull out spongey grey piece at bottom of printer. to your left side is a piece of plastic, pull that off and below it is another sponge. Carefully pull this out as well. Wash and squeeze excess water. replace. YOU MAY WANT TO USE A FLASHLIGHT TO BE SURE YOU CAN SEE WHAT YOU ARE DOING. UNplug printer, hold button. restart, release button - as described above. Keep trying. Then do a bottom plate cleaning. keep trying eventually everything resets and you can continue working. To remove ink from hands and plastic, use alcohol.

then you will need to reset it this works on some canon printers not all

1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not,
press the Power button once more.
8. Your printer should respond as normal..
Good luck

Posted on Jul 21, 2009

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Canon Pixma ip1300 Ink absorber is full what can i do

another solution for a quick override is to unplug the power lead from the back of the printer. With one hand hold down the power button on the printer whilst simultaneously plugging back in the power lead. When the light is back on, take your finger off the power button. You may need to press the power button once more, but this should 'override' the problem until the next time you turn your printer off.

Posted on Apr 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ip 3000 yelow light


my plm is ink absorber is Full software free download canon pixma ip 1300

Aug 24, 2013 | Canon PIXMA iP1300 Printer

1 Answer

Plz solve me problem\r\nmy canon ip1300 printer absorber is problem


This mayclear the ink absorber problem.There is ink absorbers located at both ends ofthe printer where the ink head move.
To dry the ink absorber, power up the printer and open the cover so the inkcartridges and print head will move to the middle of the printer.
Then take several sheets of absorbent tissue, fold it into a pad and place itinside the printer over the ink absorber on the far left hand side of theprinter to soak up the excess ink. You may need to change the absorbent tissuea few times. Then repeat the same procedure on the right hand ink absorber.
Close the lid and the printer should now function normally.

Aug 07, 2011 | Canon PIXMA iP1300 Printer

2 Answers

Cannon pixma ip 1300 cannot function to windows 7 homebasic


There may be a Windows 7 printer driver on the Canon WEB site.
You can download the Canon printer drivers from theirsupport WEB site. Please click on this link and select your model printer todownload : -http://www.usa.canon.com/consumer/controller?act=DownloadIndexAct

Jun 13, 2011 | Canon PIXMA iP1300 Printer

2 Answers

Canon pixma mp160 ink absorber is full


e75ff09.jpg this the reset wast ink please follow it step by step

Jul 15, 2009 | Canon PIXMA MP160 All-In-One InkJet...

2 Answers

My Canon ip1800 ink absorber is full is there a quick fix


No .You must replace waste ink tank.
to get printout

Jul 01, 2009 | Canon PIXMA iP1300 Printer

1 Answer

The canon pixma ip1300 was full of the ink absorber,what is the solution of it,and what i do for the ink absorber?


You need to reset your printer and replace the absorber.The absorber is on the bottom of the printer and you need to disassembly the hole printer to replace it.For reset the printer look this: http://tricks-collections.com/iptool-canon-printer/

Jun 12, 2009 | Canon PIXMA MP760 All-In-One InkJet...

2 Answers

MY PIXMA iP1300 keeps error


since canon printers need service tool to reset the waste ink counter, i suggest that you bring your printer to an authorized service center in your area to have them reset the waste absorber counter and clean it as well.

Feb 15, 2009 | Canon MP610 Photo All-In-One Printer

5 Answers

Canon Pixma ip1300 Ink absorber is full what can i do


another solution for a quick override is to unplug the power lead from the back of the printer. With one hand hold down the power button on the printer whilst simultaneously plugging back in the power lead. When the light is back on, take your finger off the power button. You may need to press the power button once more, but this should 'override' the problem until the next time you turn your printer off.

Mar 26, 2008 | Office Equipment & Supplies

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

318 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

75197 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...