Question about Sewing Machines

1 Answer

Just new to embroidery and baby lock. Practiced embroidery and one block letter is shorter in height than the others

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,760 Answers

Well without knowing what machine your using 4 your letters ?? , now if your trying this manually and freehand , the best help I can give is to lightly pencil boundary lines to fabric, this helps greatly in getting your letters the same height , now if your using an automatic machine for your letters , theres a few things to look at b4 allowing the machine to do its thing , first make sure you have placed the presser foot down at least the same thread count from presser foot edge each time u do it !! second if machine doesn't seem to be gripping fabric properly , use a test piece of same fabric until you get your tensions where they need to be , if your automatic machine uses a holding /stretching framework instead of a presser foot , make sure the fabric is the same thread count in from the edge ( one edge to start with) this will give you the best possible chance of getting letters in the same place twice

I know it might seem strange for a ole diesel driver to know so much about monograms but I did repair machines in a handkerchief factory for ten years .prior too !!

Posted on Dec 21, 2016

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I Lower the pressure foot for sewing after changing from embroidery on my brother pc- 8500?


Would a manual help?

Brother PC 8500 User Manual

Are the feed dogs in the raised position? Is it a regular stitch presser foot or a darning foot? A darning foot is shorter in height so the fabric can be maneuvered without use of the feed dogs. Just some ideas. Could also be an embroidery setting that has not been deactivated.

...

Oct 03, 2016 | Brother PC-8500 Pacesetter Embroidery &...

1 Answer

Can I space between words with my baby lock ellure embroidery machine


Yes. If you are using the built in fonts, the "space" is after the letters & numbers and just before the "open parenthesis". It looks like the underscore.

Aug 22, 2014 | Baby Lock Ellure

1 Answer

Bobbin thread shows on embroidery machine


Did you remember to put down the presser foot?

Nov 13, 2012 | Baby Lock Sewing Machines

1 Answer

Placing a space between words on the lcd screen.


Go to the end of the alphabet and use the underscore.

This will leave a space and not actually stitch the underscore.

Feb 14, 2010 | Baby Lock Espire

2 Answers

Baby Lock Embroidery Sewing Machine "ELLURE" Model ESL- Problem: Defective Embroidery Memory Card (part#35205-4) used with the "PTS BOX" and the Palette Ver 1.0 Software Program to transfer embroidery...


I had the same problem and after buying a new card, found out that you get that message if the pattern you are trying to transfer is too big. reduce the size of the pattern and see if that works

Jul 11, 2009 | Baby Lock Ellure

1 Answer

Baby lock Ellegante 2 embroidery machine


try and look here
http://www.babylock.com/embroidery/ellegante/
there is a help section

Jan 11, 2009 | Baby Lock Ellure

1 Answer

The embroidery needle keeps coming loose mid-stitching


Your needle is Bent/blunt, you need to change it and then be sure to put your the needle in as hight up in there as it will go, and tighten that as tight as you can! make sure you bobbin area has no lint in that area! keep it dust free!

I need a copy of the Ellure ESL manual anyone that can help!
s h a n a s f a s h i o n s @ h o t m a i l . c o m

Jan 09, 2009 | Baby Lock Ellure

1 Answer

Embroidery downloads baby lock ellure plus


If not a USB model, you have to get the disgustingly expensive Babylock palette box ($500) and software with the blank card to transfer the designs from cd or files. Beware of making the embroidery too small, it can make the stitch density too great and then the machine cannot sew the design. There is software called Density Works to deal with this problem.

Apr 04, 2008 | Baby Lock Ellure

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1122 Answers

Chris Wetmore

Level 2 Expert

185 Answers

yadayada
yadayada

Level 3 Expert

75807 Answers

Are you a Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...