Question about Kenwood Dishwashers

Open Question

Kenwood dishwasher lights flashing on its own without touching the contol panel the wrong programme selected

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: HELP WITH NON FUNCTIONING DISHWASHER

similar problems here, repair man says its fine but the salt light was on so i added salt and works ok now. Some dishwashers don't function properly without the salt and rinse aid, even though you're pills may have then included, you still have to add them seperately, dumb but necessary at times.

Posted on Feb 27, 2008

Illeagle
  • 525 Answers

SOURCE: Hotpoint BCI450 Programme cycles

I attempted to locate an answer to resolve the issue for you, but you have not provided me with enough information to access my service database. Please observe the TIP below, and post me back and I will be happy to assist you further. Should you require more extensive consultation to help resolve your complaint(s), you may contact me through our premium chat service.

Tip: Always provide the complete information provided on the manufacturers product information data tag, located on the unit, and not in the user’s manual. This will help you acquire a more accurate and expeditious response to your complaint.

Below is a link that will help you with parts and diagnostic procedures that are specifically tuned to your manufacturers data plate information. From this link you can identify your issue and order parts to repair your unit.
http://www.repairclinic.com/0088_9_1.asp

If my assistance helped resolve this issue, please show your appreciation by rating how effective my advice was in resolving this issue.
Thank you,
Dave E. (Illeagle)

"Your satisfaction is my personal reward"

Posted on Jun 23, 2008

SOURCE: Dishwasher control panel won't work,

I own the same unit (PLD2850RDC1), with the very same problem. The part alone costs $118.95 on-line. It's called the "Touchpad Control Panel Insert" item #1036982 @ repairclinic.com. It is a plug in part and doesn't look complicated to replace. The problem remains that this part seems to fail repeatedly (see comments on- line). Our "Professional Series" Stainless Steel Fridgidaire Dishwasher is 3-years, 2-months old and we have decided to junk it - even when it works, it doesn't do a good job.

Posted on Aug 18, 2008

  • 1 Answer

SOURCE: Indesit dishwasher DI 450 stops after 10 mins

my disher washer dls 535 starts programme then lights 2 and 3 start flashing and does not work

Posted on Nov 24, 2008

  • 19 Answers

SOURCE: kenwood dishwasher flashing E3 towards end of

As far as I know, E3 on a Kenwood is related to the temperature sensor, when you open it, are the dishes warm?

Posted on Dec 03, 2009

Testimonial: "thanks for that did not think of the temp and yes dishes sometimes come out cold "

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Zanussi dishwasher ZDF601M 1 in 3 red light comes on and programme doesn't work through


26269906-aipk5px1bmfkdpsmrgevaqwn-3-0.jpg "3 in 1" function
This appliance is equipped with the "3 in 1" function, that
allows the use of the "3 in 1" combi detergent tablets.
This function can be selected with all washing programmes.
With the selection of this function the inflow of rinse aid and
salt from each respective supply container is automatically
deactivated and also the indicator lights for salt and rinse aid
are deactivated.
Select the "3 in 1" function before the set of a washing
programme.
Once this option is selected (indicator light illuminated) it will
remain active also for the following washing programmes.
With the use of the "3 in 1" function, the cycle durations may
change. In this case, in the digital display, the indication of the
running time of the programme is automatically updated.
NOTE: Once the programme is running, the "3 in 1" function
can NO longer be changed. If you want to exclude the "3 in 1"
function you have to cancel the programme setting (see
chapter "Starting a washing programme" - "Cancel a washing
programme in progress") and then deactivate the "3 in 1"
function.
In this case you have to set a washing programme (and
options) again.

Activation/deactivation of the "3 in 1" function
(The dishwasher must be switched off)

1. Press the On/Off button. The On/Off indicator light
illuminates (setting mode).If a programme button indicator light is on, this means that a washing programme is set. The programme must be cancelled: press simultaneously function buttons 2 and 3
for about 2 seconds. All the indicator lights will turn off (except for the On/Off indicator light and eventually salt and rinse aid indicator lights) indicating that the set programme has been cancelled and the machine is now in setting mode.

2. Press simultaneously function buttons 2 and 3, until the
indicator lights of function buttons 1, 2, 3 and 4 start
flashing.

3. Press function button 4, the indicator lights of function
buttons 1, 2 and 3 turn off while the indicator light of function
button 4 goes on flashing.

4. Press function button 4 again, the "3 in 1" indicator light
illuminates, indicating that the "3 in 1" function is active.
To deactivate the function press function button 4 again, the
indicator light turns off.

5. To memorise the operation, switch off the dishwasher by
pressing the On/Off button or wait about 60 seconds after
which the dishwasher will automatically return to setting
mode.

Dado

Aug 29, 2016 | Zanussi Dishwashers

1 Answer

My kdw45b13 dishwasher display is flashing and won't start


Hello Claire, try this...
http://www.kenwoodworld.com/en-int/customer-support/instruction-manuals

May 11, 2016 | Kenwood Dishwashers

1 Answer

Kenwood KDW243A - It blew the circuit breaker.


hi it probably the heater element had a similar problem on ours.

Oct 26, 2012 | Kenwood KDW243A Builtin Dishwasher

1 Answer

Kenwood dishwasher flashing E3 towards end of programme and not finishing cycle


As far as I know, E3 on a Kenwood is related to the temperature sensor, when you open it, are the dishes warm?

Dec 03, 2009 | Kenmore Dishwashers

3 Answers

Dishwasher (Whirlpool ADP 952) not working


I have a whirlpool ADP 952 and the start button is flashing and it won't work

May 25, 2009 | Dishwashers

1 Answer

Indesit dishwasher DI 450 stops after 10 mins


my disher washer dls 535 starts programme then lights 2 and 3 start flashing and does not work

Nov 19, 2008 | Indesit 18 in. D41 Slim-Line Free-standing...

2 Answers

Problem selecting programme


hi
sounds like you have a heater problem,check connections on your main module behind control panel if all appear ok check you heater for open curcuit.

Apr 27, 2008 | Hotpoint 23 in. BFI62 Built-in Dishwasher

1 Answer

HELP WITH NON FUNCTIONING DISHWASHER


similar problems here, repair man says its fine but the salt light was on so i added salt and works ok now. Some dishwashers don't function properly without the salt and rinse aid, even though you're pills may have then included, you still have to add them seperately, dumb but necessary at times.

Feb 27, 2008 | Dishwashers

1 Answer

Dishwasher lights are all flashing


If you do have the Touch Control Electronic Pad, then you do have a problem, moisture related. You need to open the panel, use a Hairdryer to dry the panel properly and replace. This sorts many of these Touch Control Electronic Pad.

Nov 23, 2007 | KitchenAid 24 in. KUDI02IR Built-in...

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Dishwashers Experts

Chris Hall
Chris Hall

Level 3 Expert

842 Answers

ashburton

Level 3 Expert

417 Answers

Owen Barnes

Level 3 Expert

867 Answers

Are you a Kenwood Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...