Televison & Video Logo

Related Topics:

D
Dwight Middleton Posted on Dec 20, 2016
Be the first to answer

How would I know if I am ordering the right part for my tv.

My tv is the Emerson Modell LTDN42V68US and it has a flickering picture and no sound. Then it goes into a standby mode.

Answer This Question

1 Related Answer

AJIN G

Electro Med Services

  • 6694 Answers
  • Posted on Dec 20, 2016

SOURCE: My tv is the Emerson Modell LTDN42V68US and it has a flickering picture and then no picture.

Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis.
http://electro-medical.blogspot.com/To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

LTDN42V68US EMERSON TV CAN NOT RAISE VOLUME FROM REMOTE OR CONTROL KEYS
Already answered
Read full answer
Dec 20, 2021 • Emerson Televison & Video
0helpful
1answer

Where is the Emerson Ltdn42v68us reset button
Hello Patty,
To run a factory reset, locate the reset button on the connector panel. It's a small, recessed button that requires a pen to hold down. Hold it for 15 to 30 seconds to reset the television.
Alternatively, reset from your remote by locating the "Settings," "Advanced Settings" and "Factory Reset" option.
Click on this link below to see your TV manual.
Good luck,
JP
https://www.manualslib.com/manual/1215207/Emerson-Ltdn42v68us.html#manual
Read full answer
Jul 19, 2019 • Emerson Televison & Video
0helpful
1answer

My tv is the Emerson Modell LTDN42V68US and it has a flickering picture and then no picture.
Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis.
http://electro-medical.blogspot.com/To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.
Read full answer
Dec 20, 2016 • Emerson Televison & Video
0helpful
1answer

How do I program it for my Emerson TV?
If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common set-up codes to check with TVs and other devices are given, in the order of the "device's brand name list" in alphabetical order. Pull up older posts.
http://electronicshelponline.blogspot.com/
http://electro-medical.blogspot.com/
http://remotesearch.blogspot.com/
http://electrohelponline.blogspot.com/
Read full answer
Jan 20, 2016 • Televison & Video
0helpful
1answer

HOW TO PROGRAM EN-31206A REMOTE CONTROL TO EMERSON LTDN42V68US
Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electro-medical.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Search the site by type in the brand name of your device, in the "Search box at the top right of the Home page display" to see the set-up codes to your device, with different brand remote controls.
Read full answer
Jan 20, 2016 • Emerson Televison & Video
0helpful
1answer

How get universal remote model ONA12AV058 to work info button for emerson tv model ltdn42v68us
Universal remotes have loads of codes in the remote.to select the right one first select tv button then select the on button over and over again until the tv turns on. Thesis then the right code. Sometime it take 200 pushes of the power button to find the right make and model of the tv.
Read full answer
Nov 04, 2013 • Televison & Video
0helpful
1answer

I have an Emerson Television LTDN42V68US. Periodically, the sound will go out. It will do this while watching regular programming or DVR recorded programs. If I rewind I can get the same part of the...
1st, please repost your issue or question in the TELEVISION section because this is the VACUUM section, and you'll find someone who can help you much better there.
Read full answer
Oct 19, 2013 • Emerson LTDN42V68US 42" Class LCD HDTV
0helpful
1answer

No picture or sound
  • Check the main digital board for fault. It is a skilled work. Contact any experienced service tech.
Read full answer
Feb 24, 2013 • Emerson LTDN42V68US 42" Class LCD HDTV
0helpful
1answer

Flickering image
I have a vcr and dvr combination emerson tv a 27 inch and sometimes while playing it will flicker and these horzion lines come in while a program is runing, and then the sound goes way down then comes back up to normal.

can you give me a answer?

Is it my picture tube it is about to go out?

It is close to five years old
Read full answer
Feb 23, 2008 • Emerson EWF2703 27" TV
Not finding what you are looking for?

View Most Popular

Televison & Video

Related Question

LTDN42V68US EMERSON TV CAN NOT RAISE VOLUME FROM REMOTE OR CONTROL KEYS

  • Emerson Televison & Video

59 views

Ask a Question

Usually answered in minutes!

Popular Questions

My flatscreen emerson tv will not turn back on.

Emerson LC320EM8 32 in. LCD TV

What is the comcast cable code for this tv for the

Emerson EWC1303 13 in. TV/VCR Combo

How do you switch to video mode with no remote

Emerson EWF2004 20" TV

My Emerson TV will not

Emerson LC320EM9 32 in. LCD HDTV

Need TV code for Emerson HDTV LC320EM8A

Emerson EWL3706 37 in. LCD...

Check Out the Latest HD Televisions Report
Check Out the Latest HD Televisions Report

View all Fixya Reports

Top Emerson Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1259 Answers

Grubhead
Grubhead

Level 3 Expert

5755 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you an Emerson Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
Emerson EWV601B VCR.pdf....

Emerson EWV601B VCR

PDF Manual
Sylvania_symphonic_emerson_6260vb...

Emerson EWV601B VCR

PDF Manual
Emerson_ewl3706.pdf....

Emerson EWL3706 37...

Loading...