Question about Philips Magnavox 27MS343S 27" TV

1 Answer

Phillips 27PT9007D/17 Manufacture Date May 2007

Only been used since May 27, 2007. Two days ago the picture became distorted on the bottom left and bottom right hand corner. Also about 4 to 5 inches of the screen at the top turned black.

I have tried unplugging for a long period of time and it didn't solve the problem.

Posted by on

  • 1 more comment 
  • Anonymous Nov 23, 2007

    I have green and pink in the picture and image is slightly distorted. The TV is a 52 in projection 3 years old

  • copperhound Sep 07, 2008

    The picture went to half screen. Bottom half is all black. The cable was out for a period and left the tv on for a short time. I shut off the tv and turned it back and it went to half screen. I tried changing the format between the normal 4:3 and compressed. I also went through to reset the TV, no change. Is there anything I can do before I spend money on a repair tech?

  • Anonymous Jan 07, 2009

    I have the same problem



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert that hasĀ over 500 points.


    An expert who has answered 200 questions.

  • Expert
  • 298 Answers

Have you changed any settings or added
any new components to the set like a
dvd player etc

Posted on Nov 20, 2007


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:


I like any microwave apart from the Phillips whirlpool Vip 27

I have a Phillips whirlpool Vip 27 and it still works (which is unfortunate because I like any microwave apart from the Phillips whirlpool Vip 27) so I am wondering if I should recycle it or give it to a charity because it's got a crack in it and I like any microwave apart from the Phillips whirlpool Vip 27 I hope to get rid of it and get a new one and if the Phillips whripool 27 became available again then I would never buy it again so goodbye Phillips whirlpool Vip 27

on Nov 23, 2016 | Microwave Ovens

1 Answer

I need a TV Manual for 27PT9007D/17 Serial NO. BF1A0717200753

The manual is on the philips site:

Jun 30, 2009 | Philips Televison & Video

1 Answer

How do I decipher the SN on a Motorola DSR922 receiver.

The DSR922 was made from 2001-2007. No more being made from motorola ;-(
The seventh digit from the left is the date code.
So a 4 in that place means manufacture date of 2004.

Jan 29, 2009 | Arris DSR922

1 Answer

Maxtor 120GB Hard Drive

Is that external???

Mar 24, 2008 | Maxtor Hard Drive

1 Answer

Problems with TV

Our 37 inch Sanyo LCD HDTV has a problem with the picture distorted by being too wide. This has beenia problem for the duration since we bought the TV about three months ago. The PIX Shape button on he remote does not adjust this problem. We need help in solving the problem. Thank you.

Oct 24, 2007 | LG LRSC26980 25.2 cu.ft. TV Refrigerator...

1 Answer

Was distorted picture, now no picture

ok,try to resolder or reheat the main board of your tv.from microprocessor,the video chroma section,the crt board...if reheating is not the solution,replace either the microprocessor or the chroma or crt driver.

Oct 10, 2007 | Sony FD Trinitron WEGA KV-27FS100 27" TV

2 Answers

Picture is now a thin horizontal line

now only visible in a thin horizontal line. first of all you reduce brightness to monimum. it just to protect your tv from crt demage. your problem is in horizontal output section as you have mentioned that week or so ago the right and left bottom edges of the picture began to move in like a sideways triangle filled with black so this sympton is due to hor. section problem. your flyback transformer or horizontal output might be defective. but remember check for power supply is ok from surge protector hope this will help.

Oct 07, 2007 | Hitachi 35UX80B 35" TV

Not finding what you are looking for?
Philips Magnavox 27MS343S 27" TV Logo

Related Topics:

120 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74999 Answers

matt martin
matt martin

Level 3 Expert

1213 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides