Picture of a Kenmore style master number 909873

Maybe here.....

https://www.appliancepartspros.com/agitator.html

The leak is likely to be from the bottom hose to the circulation pump. Pull the machine out and lean it back against the wall. Have someone steady it as you look underneath,

Hello,


Their are 3 common lid switches for that style of washer, 2 look very similar and only the end of the plug is different here is what they look loike along with the part number for each

note how the plugs in the first picture is all that is different...the part numbers for all 3 are listed right on the picture.



I hope i have helped ya to determine which lid switch ya need,
GENE

heater element-box style number AP3094254

It depends on the model you have. Do you know the model number? If you need a replacement belt you can get one here:

http://www.vacbelts.com/kenmore.htm

When set on large load, it will use close to 30 gallons of water. On the smallest load setting, it will use right around 20 gallons. This is what makes the new front load washers look so good. They average around 4 - 6 gallons per load. Have a great day.

You must replace the direct drive coupling between the motor and transmission. About $30.00

Mine did the same. I'd love to know if you find a place to get replacements! I'm tired of using tools to turn it on.

I have a Kenmore style master model #4217013 but it stopped spinning last night. Please let me know what to do.