Need to change fuse in Electrolux EFC368X cooker hood?

Hey Peter, thank you for your inquiry!
Based off the information you have provided you need help replacing the charcoal filter inside of your Electrolux range hood. I would be happy to help assist you further in order to do so I would need to have your model number. You can locate the model number of the inside of your range hood. Once I have that information I would be happy to help you further. -Matt

Good Afternoon friend, thanks for your post!
From what you have described your Electrolux hood is working properly but the lights are not coming on. I understand that you heard a bang when the old ones went out it could be possible that your receptacle is bad or wire has shorted. I would suggest having a technician out to properly diagnosis your hood. They have the appropriate tools and knowledge needed to pinpoint the reason your lights are not working properly. Good luck. -Matt

The fuse is in the plug! Just locate that and replace!

There is a lot of help for spares and service in the link.
Please check the links below:

http://www.espares.co.uk/advice/cooker-hoods/a/6

http://www.espares.co.uk/search/cookers-and-hobs/p/1092

In case you are still looking for an answer. The same happened to me.
I found a 3-amp fuse which I changed, and now it's ok.
I removed the chimney casing and located the electrical connection into the wall. You'll find a fuse unit within the switch which swings out.

Hope this helps.

Hello,

It sounds as though the main control board is faulty or condensation has got into the board I would check on the warranty of your appliance.Therevare 3 in this range dating from 2007 to 2009.
Hope this helps.

Generally there is no fuse in the hood. The fuse or circuit breaker is in the electrical panel for your house.

Check power from the wall.

Check power in the wiring coming into the hood.

Check to see wiring is not broken.

indesit hi 591 cooker hood bulb blew replaced it hood not working at all now

hood should be connected to a fused spur outlet which you havent found. try removing the chimney and you may find it there. chimney only held by 2 screws at top usually.the fuse in the outlet sometimes goes when bulbs blow