Question about Uniden DECT 6.0 Cordless Phone

Open Question

I have DECT 1360-2 phone with 2 handsets.When I receive call by one set my wife want to hear also but she could not. What can be done Thank you

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 38 Answers

SOURCE: I have a Uniden DECT 6.0 phone set. I damaged one

On the base, open the menu and select Register Handset. The display should say Handset Registering.
On the handset you want to register, press and hold # until the handset display says Handset Registering (about 2 seconds).
1.
2.
DSL filterTelephone cordTelephone wall jack
45
In about 30 seconds, the handset display should say Registration Complete. Press Talk/fl ash and make sure you get a dial tone.
If...
Try...
you don't hear a dial tone
the display says Registration Failed --
Making sure the handset is fully charged, then start over at step 1.

Posted on Sep 08, 2009

Ad
  • 7993 Answers

SOURCE: I have the DECT 6.0 and My hand set wont ring

Hello,
Ringer may be muted (turned off).
If you need a manual to check correct procedure, here is a link.
http://www.uniden.com/index/manuals_results.cfm?cat=59
Select model and download manual.
Hope it helps.

Posted on Sep 14, 2009

hmerchant110
  • 7191 Answers

SOURCE: DECT 6.0 Cordless Phone with Digital Answering System and Caller ID: looking for manual on dect2188-5 5 handsets 1 bas...

Hi,

You can download the complete instruction manual in PDF format by clicking this link.

  • You'll require Adobe PDF Reader installed on your computer to view the manual. If it is not already installed on your computer, download it free from: http://get.adobe.com/reader/
Thanks for using FixYa.

Posted on May 14, 2010

  • 2 Answers

SOURCE: uniden dect 6.0 1560-2 phone - caller id shows my own number

caller id not working

Posted on Feb 21, 2011

  • 1 Answer

SOURCE: I bought 2 sets of

Deregistering Handsets.
Press & hold the "END" & then the " # " Key. Continue to hold the two keys until a menu comes up. Select "Deregister Handset". When it asks which handset, select the handset number that you are using.

To register a handset, simply place the handset in the main base unit. You'll the main ans mach bases on for both sets to do this.

Posted on Jan 08, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Searching and out of range message keep appearing. Can't dial out or receive calls Uniden Dect 6.0 (both phones) Tried to register base but unsuccessful.


Hi,

This is because of the following reasons

1.The handset is far away from the base unit.Try to bring the hand set near the base unit and try.
2.The base unit is not plugged in to the power supply.Please check it.

Thanx

Jul 27, 2010 | Uniden DECT 6.0 Cordless Telephone...

1 Answer

I have a Uniden DECT 6.0 phone set. I damaged one


On the base, open the menu and select Register Handset. The display should say Handset Registering.
On the handset you want to register, press and hold # until the handset display says Handset Registering (about 2 seconds).
1.
2.
DSL filterTelephone cordTelephone wall jack
45
In about 30 seconds, the handset display should say Registration Complete. Press Talk/fl ash and make sure you get a dial tone.
If...
Try...
you don't hear a dial tone
the display says Registration Failed --
Making sure the handset is fully charged, then start over at step 1.

Sep 07, 2009 | Uniden DECT 6.0 Cordless Telephone...

1 Answer

One ring - noise like fax to caller, phantom call to receiver


Try unplugging all sets and call in. Do you still have a faxlike tone, like from an ALARM system or something else down the street?

Aug 21, 2009 | Uniden DECT 6.0 Cordless Telephone...

1 Answer

No ringer in Uniden DECT 3080-3


I'm having the same issue, I'm going to exchange it today for another. I'll let you know if that solves the problem!

Mar 27, 2009 | Uniden DECT 6.0 Cordless Telephone...

1 Answer

Can't re-register extra receiver


Try this, Push and hold the "End" key, while still pushing the "End" key push in the "#" key and hold both keys till you hear a beep. The LCD display should now say "De-register Handset" and under that "Base Unavailable" Select Base unavailable. The LCD should now say "Handset not registered, place in base" Just set it in the charging cradle on the base unit and it should register to the base.

Feb 25, 2009 | Uniden DECT 6.0 Cordless Telephone...

3 Answers

Tesco ARC200 Cordless DECT Phone


[ARC20x User Guide p20: 11 Handset Registration]
To register a new handset:
  1. Press and hold the HANDSET LOCATOR on the base unit until you hear Registration tone (repeated 'beeps')
  2. On the handset, press the PROG then the UP or DOWN button to display "REGISTER"
  3. Press the PHONE/OK
    -> The display shows "BS 1234". If any of these numbers is steady (not flashing), then the handset is already registered to that base unit.
  4. Press 1 to select base unit number 1
    -> The display shows "BASE PIN _ _ _ _"
  5. Key in the system PIN (default 0000) and press the PHONE/OK
    -> The display shows "WAIT _ _ _ _" for a few moments, while the handset searches for a base. Then it shows a list of handset numbers which are still free on the base unit.
    (For example, "1 34 6" indicates that numbers 1, 3, 4 and 6 are free; 2 and 5 are already assigned to other handsets.)
  6. Key in a free handset number
    -> After a moment, the display should show the handset's name and number.
If registration fails...
  • Try again, making sure you begin step 2 as soon ans Registration tone starts.

Nov 08, 2008 | Uniden Cordless Phone

1 Answer

How do I record my own message for the answering machine?


1. Press and hold down the announce button.
2. You will hear record announcement after the tone.
3. Once you hear record announcement after the tone continue holding the relase button and record your message.
4. When you are done recording release the release button.
5. To hear your recorded message press and hold the release button and release after you have heard your message.
6. If you are not pleased with your recorded message, repeat the steps obove.

Nov 01, 2007 | Uniden DECT 6.0 Cordless Telephone...

Not finding what you are looking for?
Uniden DECT 6.0 Cordless Phone Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Lands Phones Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

Cindy Wells

Level 3 Expert

5127 Answers

Are you an Uniden Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...