Question about Samsung Televison & Video

1 Answer

Un60f8000bfxza sound no picture Samsung led

Unplug the cord from powerboard to main board get a blue screen

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Samsung Master
  • 74,251 Answers

Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. http://electronicshelponline.blogspot.com/ To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.

Posted on Dec 19, 2016

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Samsung UN65EH6000FXZA (Version YH02)


There is three possibilities:
1. Defective back lights LED strip.
2. Defective LED driver section integrated in the main power supply.
3. the main board.

How to check it:
1. You need a LED back lights tester to check the strips, or open the panel, use a 3.7 V DC power supply to test each LED diode separately.
2. Use a multi meter to test the out put DC voltage from the connector to the LED strip between the + & - for each section, (like 1+/1-, 2+/2- etc.) it should read 140 - 220 V DC. (need power up the TV).
3. Un-plug the cable between the main board & the power supply, power up the TV, if you get the back lights light up, the main board is bad.

Aug 11, 2017 | Samsung Televison & Video

1 Answer

Samsung un60d6000 tv no picture only sound?


the voltage is ok doo you have constantly 150 v if not led blocks is bad

Feb 28, 2017 | Samsung UN60D6000 60 Inch 1080p Smart TV...

1 Answer

Have a Samsung 55" LED UN55FH6030F, dims to about 50% no matter the picture mode (dynamic, Standard etc) If I change input, screen goes really bright, then darkens to 50%, no lines or dark areas.


Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.

Nov 13, 2016 | Samsung Televison & Video

1 Answer

What is the repair for a Samsung LED television with sound but no picture?


Hello
disconnect and reconnect all the plugs and see if there is a change
Check the capacitors, if they are swollen on the upside, replace them and it will be fixed.
Good luck

Feb 27, 2016 | Samsung Televison & Video

1 Answer

How do I fix my Samsung 40 LED TV that has sound but no picture?


Samsung 60-Inch 1080p 120Hz Slim Smart LED HDTV ...

? 10:42
www.youtube.com/watch?v=hcVhHU322Gk
May 18, 2015 - Uploaded by Thomas M. Landry
samsung un60h6350 60-inch 1080p 120hz smart led tv,samsung... 120hz smart hdtv,slim led tv,65 inch smart tv deals,samsung 40 led 1080p 120hz ... LCD & LED TV Repair - No Image & Blank Black Screen Flashlight Test ...

Oct 15, 2015 | Samsung 40" 1080p 120Hz Slim LED Smart TV...

1 Answer

It has sound but not picture, please help


Hello. Repairing your own TV isn't something I recommend. You risk injury, and could cause more damage. If you still want to proceed, remove the back of the TV. Unplug the cable between the Main board (the one the inputs connect to) and the Power board (the one the AC cord plugs into). Then plug in the AC cord. If the backlights come on, you probably have a bad Main. If they don't, it's likely the panel, which is expensive.

Oct 14, 2015 | Samsung UN40EH5300 - 40" 5 Series...

1 Answer

HI I have a 3 yr old Samsung LN3242 LCD Tv. Last night the picture on the tv went out and a high pitched squeal started. By the time I got up to unplug the tv smoke was coming out the back. I unplugged...


Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis.
http://electronicshelponline.blogspot.com/
To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.

Mar 23, 2017 | Samsung LNT3242H Television

1 Answer

Akai LCT320180 Picture won't display


Well I am not sure about that model but I had one do that and what I had to do was unplug and replug the LVDS which is the cord connecting the Main board to the screen. I am not sure exactly where it is located on that model but if you take off the back and locate the board that looks to be the "main" board. Then you have to locate the cord that connects to the screen, in mine it is a bunch of wires in a black covering, and unplug and replug it. I had to do this about 10 times to get the picture unfortionantly I already bought a new one but it now works.

Dec 03, 2007 | Maxent MX-42HPM20 42 in. Plasma HDTV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74251 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...