Question about Garden
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I believe you may have the belt over one or more of the belt retainers next to the pulleys. They are 5 or 6 inches long and about a 1/4 inch in diameter. You have to loosen them when you put the belt on then adjust them to where they are just barely touching the back of the belt. They keep the belt from jumping off.
Posted on May 02, 2010
For Troy-Built USA, use this link and submit your model number and serial number to find and download your manual:
For Troy-Built Canada, use this link and submit your model and serial number to find and download your manual:
All other countries use this page and find the applicable website or email address then go to the applicable website or email the contact point:
Thanks for choosing FixYa,
Posted on Oct 04, 2010
SOURCE: How to install Mower blade
What I do is to drop the mower assembly to the ground, then I have enough room to install the drive belt without having to remove the mower assembly. You could put the tractor on blocks to lift it up higher so the mower might go a little lower, but it is the same procedure to install the belt. That is the only way I know to install the belt without removing the mower assembly. I know this is not what you wanted to hear, maybe somebody might have another idea that would help you. Regards and good luck.
Posted on Mar 12, 2011
Tips for a great answer:
Apr 09, 2016 | Snapper Garden
Dec 06, 2015 | Husqvarna Fast Tractor YTH24V48 48" 24HP...
Sep 14, 2015 | Craftsman Garden
Aug 02, 2015 | Craftsman Garden
May 10, 2014 | Husqvarna Lawn Tractor 48" Deck, 23 Hp,...
Put on your work gloves. Check the frame size for your mower. It will
either be a 56-inch frame mower or a 76-inch frame mower. When you have
determined the frame size, adjust the tractor's rear wheels to the mower's
frame size. For 56-inch frames, adjust the rear tractor wheels to 56-inch
centers or less. The same rule applies for 76-inch frames.
Back the tractor into a position where you can align its left lower link
to the mower's lift link pin. Attach these two parts together and secure the
connection with the tractor linchpin.
Roll the tractor and adjust the leveling crank until the tractor's right
lower link can be attached to the right link pin on the mower. Use the tractor
linch pin to secure the connection.
Attach the upper link from the mower to the lower hole in the tractor
rocker arm by using the link pin.
Start the tractor. Using the hydraulic control lever, lift the mower
frame assembly slightly and move the mower to the left to allow attachment of
the left stabilizer. Place the stabilizer guide under the tractor's left lift
link. Position the clamp over the link and tighten the nut firmly
Depending on the tractor type, install the clamp plate or push rod
anchor assembly onto the left lower link. Install the push rod on either the
clamp plate or anchor assembly.
Shift the mower assembly to the right to attach the right stabilizer.
Place the stabilizer guide under the tractor's right lift link. Position the
clamp over the link and tighten the nut firmly.
Raise the mower using the hydraulic control, then attach the mower lift
spring to the spring links with the pins that have been provided. Lower the
mower assembly and turn off the engine.
Remove the tractor power takeoff (PTO) cap and connect the splined end
of the mower's drive shaft to the PTO shaft. Secure the connection with the
snap coupler found on the yoke.
Rotate the leveling crank to lower the frame, ensuring that it is
parallel to the ground. Use the leveling crank lock to secure the crank lever.
Jul 15, 2012 | Vacuums
Mar 12, 2011 | Craftsman 20 hp 42 in. Deck Lawn Tractor -...
Sep 02, 2010 | Craftsman 20 hp 42 in. Deck Lawn Tractor -...
Sep 21, 2009 | Craftsman 42 in. Deck 19.5hp Lawn Tractor
Oct 17, 2017 | Garden
38 people viewed this question
Usually answered in minutes!