Question about Faema Coffee Makers & Espresso Machines

Open Question

Can anyone help me get hold of a faema x3prestige owners manual please? Thanks jr

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Faema smart a2 espresso machine i need to reprogram it is there any one can help me out


Assuming you've got a grind which brews out correctly when manually brewed.....
Fill and tamp a portafilter, ready. Press and hold 'stop' pad until machine beeps. Tap the pad you want to program. Lock in the portafilter. Press and hold the pad until you get the volume required. Press 'stop' to exit programming, the machine will stop beeping.

Jun 06, 2014 | Faema Smart A2 Automatic Espresso Machine...

1 Answer

Bought a used Faema Eurostar Combi. Don't have a


If it's the same as the used one I just picked up, there is a dial position for coffee, with a little cup on it. The dial position for steam is the one that cares about the positoin of the steam/hot water button.
The coffee position will never use steam and you don't need worry about the position of the steam button if you're not frothing milk.

Jun 29, 2010 | Faema FA60081

1 Answer

I have a faema due automatic single group. Works fine except I cannot program shots. I hold down the "stop" button as per the manual, but there is no "beep" initiating the programming mode. What is wrong?


Hold down button for 8 to 10 seconds. If that is not working then you might have the older model in which you have to hold down the stop plus the button that you are programming until you get the desired volume then release button and stop button.

Jun 26, 2010 | Faema FA60081

1 Answer

User Manual for Faema D92/A, doesn't dispense coffee, only water


This will take some time so bear with me.
The problem with the machine is most likely the solenoid valve(black or blue electrical box connected on the side of the group), for easier access remove the front panel there are about 5 screws holding it in place, 2 on the bottom and 3 on the top under-side. Disconnect or turn off the water supply. Then using a 14mm open end wrench remove the nut and the discharge pipe. Do Not remove the 4 small allen wrench screws on the brass piece connected to the machine. Now remove the electrical box over the silver pipe, and using a cressent remove the silver pipe from the brass rectangle square. Slowly open the water supply, if water shoots out then the head is clear, we will move on if not, use a pin and clean the middle hole. Check the silver pipe also there is a small plunger in there press it in if it moves freely then we are good, if not you can try soaking it in puro caff until it clears or just get a new solenoid coil. Remove the shower screen and screw in the group head, you can soak those also.
If you still cannot get water, then we will have to go deeper into the machine.

Jun 01, 2009 | Faema FA60081

2 Answers

I have a Faema special. model no.537212 I need the schematics


I have no clue about this product, but at the terminal board how many
wires come from machine to the board,or just wires coming from machine. A 220v, should have 2 hot, neutral,gr, so 4 wires. Depending
on what it looks like, the wires come from machine to a board or just wires.then the colors of those wires.

You should send them an email asking for help or schematic.
I posted there website below. Sorry could not help further.

http://www.faema.net/site/index.html

Apr 07, 2009 | Faema FA60081

1 Answer

I would like to know a place where i could get the technical and part manuel of the following machine: ''FAEMA E91 A Diplomat'' And please if you can get it in french version it would be appriate thanks...


FAEMA COMPANY LTD. M6G 1Z6 Ontario and Western Canada ADDRESS _t.gif 672 Dupont Street, Suite 201, Toronto TELEPHONE _t.gif 001 416 535 1555 FAX _t.gif 001 416 535 3843 EMAIL _t.gif espresso@faema.net _t.gif iko_piu.gif _t.gif FAEMA DISTRIBUTEUR, INC. QC H2R 2W5 Montreal, Quebec ADDRESS _t.gif 14 Jean-Talon West TELEPHONE _t.gif 001 514 276 2671 FAX _t.gif 001 514 276 5991 EMAIL _t.gif sales@faemacanada.com

Mar 16, 2009 | Faema FA60081

3 Answers

Commercial Faema Espresso Machine with 2 heads, model #E97/A-2


It can be many things. If I understand machine start working (pouring water) itself, otherwise not working.
Probably your touch pads is bad, must be replaced. If I now more about problem mighty I can help more.

Mar 14, 2009 | Faema FA60081

1 Answer

User Manual


Please email me tomorrow at dspringer5114@hotmail.com. I can scan my manual and send you the pdf from my office. I just need you to remind me. Thanks
dgsrgr8

May 31, 2008 | Faema Coffee Makers & Espresso Machines

Not finding what you are looking for?
Coffee Makers & Espresso Machines Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Faema Coffee Makers & Espresso Machines Experts

richie46

Level 3 Expert

12962 Answers

ray gallant

Level 3 Expert

46437 Answers

Are you a Faema Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...