Question about JVC LT-42P510 Widescreen 42 Class 42.0 Diagonal LCD Television, TeleDock - Integrated iPhone and iPod Dock, Charge and Playback iPhone or iPod Video and Audio Content, 120Hz Clear Motion Drive, Digital 5-point Color Management, ATSC/QAM Tuner, 16:9 Aspec

1 Answer

Jvc (2010) model LT-42P510.No picture and not sure about volume.When I unplug the tv and plug it back in,I can hear it click on but the blue light stays on and no picture.I've tried reseting but same.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • JVC Master
  • 74,383 Answers

Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
Before going further; try a hard reset first. If it does not help you, replace the main digital board. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; visit the site linked here.

Posted on Dec 17, 2016

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

SOURCE: Lg tv will not turn on, red light

i think your bulb is shot must be replaced

Posted on Apr 29, 2008

  • 1 Answer

SOURCE: JVC 42 INCH PLASMA POWER LIGHT BLINKING ONLY NO PICTURE

no kidding? what is the problem so prevelant in this unit? obvious design flaw.

Posted on Jul 26, 2008

Fujitsu
  • 29 Answers

SOURCE: Hitachi Plasma TV model P50H401

I think you have problems with the digital main PWB.

If the power PWB failed, turn off and change the pilot ligth to red.

Posted on Nov 28, 2008

  • 257 Answers

SOURCE: I have a JVC LT-42X579 TV. I got home tonight and

This is common problem of the failure of power supply board inside TV. You need technician to figure out this problem.

Posted on Aug 13, 2009

  • 6 Answers

SOURCE: Sanyo Vizon 42" Plasma DP42746 Was

This is a common problem with these TVs. You can download the official Sanyo repair manual for this TV (DP42746) at http://www.eserviceinfo.com/downloadsm/43343/sanyo_dp42746.html. I uploaded it here when I had the same issue with my TV last year. The solution is almost always to replace the Power Board (Y-Main) and the Upper and Lower Y Buffers. The parts and costs (from Sanyo in July 2009) are listed below (NOTE: Sanyo will not ship these parts to anyone but a repair shop): 1. V4 Y-Main (Y-Sustain) Circuit Board (Part # LJ92-01200A, Alt Part # LJ41-02759A) - USD $139.00
2. Upper Y-Buffer Circuit Board (Part # LJ92-01202A, Alt Part # LJ41-02760) - USD $64.00
3. Lower Y-Buffer Circuit Board (Part # LJ92-01203A, Alt Part # LJ41-02761A) - USD $64.00
Sanyo charges USD $10.50 for shipping, which brings the total cost for parts to USD $277.50. From my research, a shop would probably charge between USD $500 and $700 to do this repair. FYI - there is a class action lawsuit pending against Sanyo for this issue. The V4 Y-Main (Y-Sustain) Circuit Boards fail VERY frequently in this TV due to overheating. Hope this helps.

Posted on Aug 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Jvc no power when plugged in


you tube might have blown ouy that's a big problem.Next time make sure you plug your TV in a surcharge protector

Nov 12, 2012 | JVC LT-37X898 37 in. TV

2 Answers

I need the USB firmware update utility for a JVC LT-32P679 TV.


my tv won't show a picture the blue light on the bottom left hand corner just keeps blinking

Apr 05, 2011 | JVC Televison & Video

1 Answer

My 52 in jvc model lt-52x579 turns on but there is no picture or sound and about two seconds later the led light for the power starts to blink i tried to turn it off but it just keeps on trying to turn on...


Sound like the power supply board has gone out .Unplug the tv for 2 or 3 minutes and plug it in again and try to turn on. Some times they will come on .But It sounds like the PSB is going out .

Feb 14, 2011 | JVC LT-52X579 52 in. LCD TV

2 Answers

The tv doesn't power on, it trys to power up, but then goes off, the blue power on button to the left is blinking. Please help, thank you


If you go jvc .com enter your model # ,there is an article on how to reset the tv. First you have to unplug your tv for 10 secs., plug it back in and press and hold the menu and vol- buttons while holding these buttons in press the power button once, count to 3 and release the menu and vol- button. The lillte blue light should be on. wait for 40 secs. the picture should now come back on. This worked for me, I had the same trouble.
mike

Jan 12, 2010 | JVC LT42P789 42 in. LCD TV

4 Answers

JVC LT-32P679 Blinking Power Light, Automatic Shutoff


1. Hold [menu] and [vol-] button on the side of the TV
2. while holding these, press the [power] button on the side of TV (NOT remote)
3. blue light comes ON and stays ON
4. wait 10 seconds then let go of [menu] and [vol-]
5. wait another 30 seconds and some type of picture should appear

I think this is right. I got it from the JVC call centers guys so sorry if I missed or messed up a step.

Mar 17, 2009 | JVC LT-32P679 32 in. LCD TV

1 Answer

Power problem with JVC LT-32x576


there is a firmware update for this model download from jvc website onto a thumb drive and plug it into the side plug.

Mar 10, 2009 | JVC LT-32X576 32 in. LCD Television

3 Answers

JVC 42 inch LCD HD TV has no picture or sound


utencilio posted this fix. It worked for my JVC LT-42X579.

Okay, I found a fix! Called JVC, spoke to somebody there, here it is:
1)unplug the TV completely, no wall no power strips, completely
2)wait 10 sec
3)plug TV back in and Turn it on, the light will still be doing the same thing
4)wait 30 sec
5)ON THE TV, not the remote, locate the menu, volume (-) and power button.
6)while simultaneously holding down the menu and volume (-) button, pressed the power button ONCE and continue to hold the other 2 for 10 sec.
7)on the remote control, go to menu>settings>system info
*** now this I know as a FACT will work on systems that display: JVC - ver.5.32FO001, but I don't know of any other versions***
8)press the mute button on the remote twice
9)unplugg TV again and wait 10 sec.
10) plug TV in and turn on

It SHOULD be working normally now... Thanx to the guys a JVC support for this one, I know it seems like an obvious first place to look, but sometimes it isn't. I for one checked online forums first

Jan 28, 2009 | JVC LT-42X579 42 in. LCD TV

1 Answer

Blue light


Okay, I found a fix! Called JVC, spoke to somebody there, here it is:
1)unplug the TV completely, no wall no power strips, completely
2)wait 10 sec
3)plug TV back in and Turn it on, the light will still be doing the same thing
4)wait 30 sec
5)ON THE TV, not the remote, locate the menu, volume (-) and power button.
6)while simultaneously holding down the menu and volume (-) button, pressed the power button ONCE and continue to hold the other 2 for 10 sec.
7)on the remote control, go to menu>settings>system info
*** now this I know as a FACT will work on systems that display: JVC - ver.5.32FO001, but I don't know of any other versions***
8)press the mute button on the remote twice
9)unplugg TV again and wait 10 sec.
10) plug TV in and turn on

It SHOULD be working normally now... Thanx to the guys a JVC support for this one, I know it seems like an obvious first place to look, but sometimes it isn't. I for one checked online forums first.

Nov 27, 2008 | JVC LT-42X579 42 in. LCD TV

Not finding what you are looking for?
JVC LT-42P510 Widescreen 42 Class 42.0 Diagonal LCD Television, TeleDock - Integrated iPhone and iPod Dock, Charge and Playback iPhone or iPod Video and Audio Content, 120Hz Clear Motion Drive, Digital 5-point Color Management, ATSC/QAM Tuner, 16:9 Aspec Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74383 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a JVC Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...