How to dc around sc - Video Cameras

https://www.manualslib.com/manual/1888939/Supersonic-Sc-499.html?page=12&term=factory&selected=1#manual

Chain 2 then in the next SC (of the row below), make the combination stitch. So, if the previous row has a bunch of SC, you would make the stitches leading up to the Chain 2. Then Chain 2 and in the next SC, make the 1SC, 1 HDC, ! DC.

Hi

Input: 120VAC 60Hz 35W
Output: 12VDC 1.6A

Source - http://www.ebay.com/itm/Homedics-AC-DC-Adapter-Model-ADP-8-D12-16-P-02-12V-1-6A-Power-Cord-Wall-Plug-/111507454421?pt=LH_DefaultDomain_0&hash=item19f65cb9d5

I hope this helps :)

watch some videos. :)

http://www.youtube.com/watch?v=o1txJLRPfuE

After the Shell row... chain 2,skip 1, then begin your double crochet.

May I suggest that you find a crochet forum or video on youtube? Lots of things to learn on Youtube. ;)

Other possibilities

A095/A096/A097

SC 900

[SC900] - replace fuse 8 0 4, DC power supply

A109/A172/A199

SC 900

[SC900] - replace black total counter

A133/A195/A217

SC 900

[SC900] - CN4 0 3 SCU PCB, poor connection

A133/A195/A217

SC 900

[SC900] - replace SCU PCB, see FSM page 5 64 for rom and dip switch info

A193/A224/A264

SC 900

Total counter error: Fuse #5 on PSU blown

A193/A224/A264

SC 900

Total counter error: Total counter defective

A229

SC 900

[SC900] - NV ram defective

A230/A231/A232

SC 900

[SC900] - re load copier firmware

A246/A247/A248

SC 900

[SC900] - replace counter harness

A292/A293/B098

SC 900

Electrical counter fail - Replace Mechanical Counter

A292/A293/B098

SC 900

Electronic counter error - Replace NVRAM-B098 9590.

A292/A293/B098

SC 900

[SC900] - replace IOB PCB

A294/A295

SC 900

[SC900] - NVRAM defective

B010/B188

SC 900

Electrical total counter error - NVRAM data defective

It is a DC seperation corona error, open up the unit (like a ****) and check for paper clip or other such stuff on/around the long wire on the lower part of the printer otherwise call for service, sorry. -Carl

Hi,

You can download and print the instruction manual in PDF format by clicking this link.

Please note: Adobe PDF Reader is required to view this manual. Download the latest version of Adobe Reader.

Hope this solves your problem. Thanks for using FixYa.

Please download the manual from the below link:

http://www.samsung.com/us/support/detail/supportPrdDetail.do?menu=SP09&prd_ia_cd=&prd_mdl_cd=&prd_mdl_name=SCDC164

Hope this allows you to resolve the issue.

Regards

Anand Gupta

measure with your vom meter at spker terminal dc voltge.You have to be fast .If you get any dc voltage at out put change amplifier ic.The voltage may appeare very little before unit goes off therefore you have to be fast ih measuring