Question about NordicTrack Exercise & Fitness
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Several issues, drive belt that drives the walking belt could be loose but you should smell rubber if its slipping.
Something could be caught in the track causing extra drag, its easy to do if you have kids or pets
Check for when you last lubed the track and walking surface, with no silicone it will drag and bog at low speeds
Posted on Oct 22, 2009
Hello there. Yes you actually can use a magnet. (thats all the safety key is) It will need to be strong enough to make the switch inside the console activate. I use one from a telescoping magnet used for picking up small screws (available at the big box stores) when I dont have one on service calls.
Just to let you know a refrigerator magnet will not be strong enough!
Good Luck! Tim
Posted on Feb 21, 2010
SOURCE: I have a Nordictrack C2200
You have to check the Driver circuit board for the motor. There is motor control IGBT Insulated Gate Bipolar Transistor) in this board .If the IGBT is short then the treadmill will try to run at high speed without setting any value or witout pressing the start button and will shut down . You have to check the OHMS between the seocnd and third of lead of the IGBT. If it shows less than 100 Ohms then the IGBT is short and you have to replace the same. Also you have to check the connection to the control pannel. Is there is any loose conatct. Remove the connection in the motor control board which go to the control pannel and reconnect it. Also check the speed sensor. In most of the treadmill you can find the speed sensor near the motor pully. Remove the speed sensor and clean it and the refix it. Remember one thing remove the power of the treadmill and leave it for 30 minutes then only oppen the treadmill. Because there is high voltage storage capacitors in the motor control board which will hold charge for some time even after the power is disconnected. i have added the picture of IGBT for your refference.
Posted on Aug 18, 2011
Tips for a great answer:
Jul 22, 2016 | NordicTrack Exercise & Fitness
Dec 28, 2015 | Nordic Track NordicTrack COMMERCIAL 1750...
Jan 08, 2014 | Nordic Track NordicTrack COMMERCIAL 1750...
Dec 12, 2013 | Nordic Track Exercise & Fitness
Nov 13, 2013 | Nordic Track NordicTrack C2150 Treadmill
Oct 20, 2013 | Nordic Track Nordictrack C 1900 Treadmill...
Jun 14, 2013 | Nordic Track NordicTrack COMMERCIAL 1750...
Nov 22, 2011 | Nordic Track Nordictrack Exp 1000...
Aug 02, 2010 | Nordic Track NordicTrack Elite zi...
Apr 24, 2010 | Nordic Track NordicTrack Treadmill, A2550
39 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: