Question about Garden

Open Question

Iam working a manure spreader not a mixer

It is a H&S NO 435 Manure spreader

Posted by on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75051 Answers

SOURCE: I have a model 33 John Deere manure spreader that has the beater gear box with worn gears that won't engage. I cannot get replacement gears due to age of unit. Is there a way to repair the gears by we

There is no way to repair a worn gear, this is due to the heat treating of the metal to toughen it against wear and tear of use, otherwise it wouldn't last but a few hours of operation, this precise heat treating of the steel can only be done with special equipment and requires special skills to pull off correctly, so no you will need to get new gears. I know from personnel experience that you can get parts for these old farm implements, call around and see what you can find out. I will say that worn gears are not the common reason for hard gear engagement, that would be worn shift dogs and synchro ring cones or worn gear shaft bearings.

Posted on Dec 13, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why doesn't my John Deere 170 start


check the fuse next to battery --and check all the safety switches and connections

Oct 11, 2016 | John Deere 1976 Manure Equipment Brochure...

1 Answer

Look at Doppler radar for south east 1/4 of Wisconsin the north west corner of fond u lac county there are 2 red areas very visible on map of


methane gas is heavier than air so it will lie on the ground and disperse
what you are seeing may be a higher than normal temperature from fresh manure but the area would have to Huge and very recent
call the bureau and ask for an explanation

Sep 10, 2015 | Vehicle Parts & Accessories

1 Answer

How many yards per ton of chicken manure


If your asking how much manure to ad to dirt, you would first need to know what condition your dirt is. The department of agriculture in many places will test the dirt for free. Then based on what your planting will determine how much

Aug 22, 2014 | Heating & Cooling

1 Answer

200 yards to cubic feet than cubic feet to tons for chicken manure that's been composted


You say 200yds do you mean 200 sq yds or cubic yds? There are 9 cubic feet in a square yard 1ft deep and 27 cubic ft in a cubic yard. You will have to know and factor in the weight of 1 cubic ft of manure to get your tonnage. 2,000 lbs in a short ton.

Aug 22, 2014 | Office Equipment & Supplies

1 Answer

JD R-1 spreader controls


www.deere.com

Ask them, they made it.

Aug 18, 2013 | John Deere Model "r" Manure Spreader...

3 Answers

I have a model 33 John Deere manure spreader that has the beater gear box with worn gears that won't engage. I cannot get replacement gears due to age of unit. Is there a way to repair the gears by we


There is no way to repair a worn gear, this is due to the heat treating of the metal to toughen it against wear and tear of use, otherwise it wouldn't last but a few hours of operation, this precise heat treating of the steel can only be done with special equipment and requires special skills to pull off correctly, so no you will need to get new gears. I know from personnel experience that you can get parts for these old farm implements, call around and see what you can find out. I will say that worn gears are not the common reason for hard gear engagement, that would be worn shift dogs and synchro ring cones or worn gear shaft bearings.

Dec 13, 2011 | Garden

Not finding what you are looking for?
Garden Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Garden Experts

Dennis Key
Dennis Key

Level 3 Expert

2475 Answers

john h

Level 3 Expert

10993 Answers

yadayada
yadayada

Level 3 Expert

75005 Answers

Are you a Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...