Question about Pioneer Audio Players & Recorders
If the unit has no power whatsoever then it's likely an internal fuse in the power supply section has blown. It could have gone for a verity of reasons, replacement might cure the problem, but if it blows again or straight away then there is a more serious problem.
Posted on Dec 19, 2016
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: receiver problem
Try this, it may work for you.
1.)Plug the unit into your mains voltage.
2.)Depress the enter and advanced surround buttons (on the front panel of receiver) at the same time for
at least 2 seconds, you should hear the relay tick and front panel should light up.
Posted on Dec 31, 2008
SOURCE: Less than 1 Yr. old
Disconnect the power plug from the outlet, and insert again. Make sure there are no loose strands of speaker wire touching the rear panel. This could cause the receiver to shut off automatically There is an internal fuse.if its blown,its usually a faulty transistor and will need repair Resetting the main unit
Posted on Feb 01, 2011
Use this procedure to reset all the receiver's settings to the factory default. Use the front panel controls to do this.
1 Switch the receiver into standby.
2 While holding down the ADVANCED SURROUND button, press and hold the STANDBY/ON button for about three
3 When you see RESET? appear in the display, press '
ST -'. OK? shows in the display.
4 Press SOUND RETRIEVER to confirm.
OK appears in the display to indicate that the receiver has been reset to the factory settings.
Disconnect the power plug from the outlet, and insert again.
Make sure there are no loose strands of speaker wire touching the rear panel. This
could cause the receiver to shut off automatically
There is an internal fuse.if its blown,its usually a faulty transistor and will need repair Resetting the main unit
Resetting the main unit
Posted on Feb 01, 2011
Tips for a great answer:
Jan 26, 2012 | Pioneer VSX-D514 Receiver
Aug 04, 2011 | Pioneer VSX-D514 Receiver
Register and download the manual for free at retrevo.com
Feb 26, 2011 | Pioneer VSX-D514 Receiver
Aug 17, 2008 | Pioneer VSX-D514 Receiver
Jul 06, 2008 | Pioneer Audio Players & Recorders
Mar 07, 2008 | Pioneer VSX-D514 Receiver
28 people viewed this question
Usually answered in minutes!