Question about Toshiba E-Studio 456 Copier

1 Answer

How to clear code f901 toshiba 456 - Toshiba E-Studio 456 Copier

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,373 Answers

CDF0 Offset tray related
service call
Initialization error of the offset tray: The home position of
the separator cannot be detected when the power is
turned ON.


[CDF0] Initialize error of the offset tray (e-STUDIO205L/255/305)
(1) Check if each connector between the OCT motor and OCT board (CN261) is disconnected.
(2) Check if each connector between the OCT board (CN261) and LGC board (CN302) is
disconnected.
(3) Check if each connector pin is removed or the harness is broken.
(4) Check if any conductor pattern on the OCT board and LGC board is short circuited or open
circuited.
(5) Replace the OCT motor.
(6) Replace the OCT board.
(7) Replace the LGC board.

Posted on Dec 16, 2016

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Toshiba e-Studio 456 Error Codes F901


The challenge is with the speed of LGC is not corresponding to the model of the machine installed now try to check it if theres no harness for connecting to the connectors of LGC Board of CN311 and CN316
toshiba-e-studio-556-error-codes-f901-iby3lvzc0tbxrdjcbrfpd0co-1-0.jpg

Jan 09, 2017 | Toshiba Office Equipment & Supplies

1 Answer

How to clear code c970 toshiba 456


High-voltage transformer abnormality: Leakage of the
main charger is detected.


1. Is the main charger installed securely?
2. Check if the spring of high-voltage supply contact point is
deformed.
3. Check if the needle electrode is broken or the main charger
grid is deformed.
4. Check if any foreign matters is on the needle electrode or
the main charger grid.
5. Check if the transfer roller and the separation needle are
installed securely.
6. Check if the transfer roller or the separation needle is
removed.
7. Check if there is any foreign matter attached on the transfer
roller or the separation needle.

Jul 19, 2016 | Toshiba E-Studio 456 Copier

1 Answer

Toshiba e506 copier error code f901 sub 1


Engine speed error: The speed information of the LGC
board is damaged.

May 19, 2015 | Toshiba Office Equipment & Supplies

1 Answer

ERROR CODE CC93 ON A TOSHIBA ESTUDIO 456


Knurled roller shift solenoid abnormality: An abnormality occurs in the knurled roller shift solenoid. [MJ-1032]

that's what the error means. If you've replaced the roller, solenoid, etc. you may need an actual Toshiba tech to help you.

Oct 17, 2014 | Toshiba E-Studio 456 Copier

1 Answer

C440 error


chik tha power suppl bord

Nov 15, 2013 | Toshiba E-Studio 456 Copier

1 Answer

E studio 456 c440 error code solution


Hi
C440 error on device problem toshiba e-studio 456 se
Please let me correct code.
400-08 code did not work on 456
Thanks

May 22, 2013 | Office Equipment & Supplies

2 Answers

Code c 440


Try press number 0 and 8 meanwhile power ON machine. After 3 sec, release the number. Press 2002 > Start > 0 > Enter. Reboot machine. Good Luck

May 17, 2013 | Toshiba E-Studio 456 Copier

1 Answer

My Toshiba 520 copier is printing blank pages


Toshiba studio 520 day departmental code was bought at the auction

Jan 15, 2013 | Toshiba E-Studio 456 Copier

1 Answer

I need code 4 toshiba model no; urc20-dif


Toshiba is either
018 028 083 165 205 245 270 279 281 370 437 446 455 456 471

Nov 01, 2010 | Directed 434MHZ Remote Control

Not finding what you are looking for?
Toshiba E-Studio 456 Copier Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Office Equipment & Supplies Experts

Branko Djurdjevic
Branko Djurdjevic

Level 2 Expert

102 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

pkwc

Level 2 Expert

254 Answers

Are you a Toshiba Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...