Question about General Dryers
Posted by Anonymous on
Think its Insufficient heating (maximum time exceeded).
Possible fault Heater unit faulty; Wiring faulty; NTC sensor incorrectly calibrated/out of position; Electronic board faulty.
Machine Status/Action Cycle paused.
Posted on Dec 16, 2016
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Electrolux dryer error code e61
There is a 'tech sheet' in the back pf the dryer. Unplug machine, Remove the access panel on the back to get to it. Reach in and it should be there. It will tell you how to do a button check. You have to enter a test mode through the buttons.
The E 61 is a stuck button.
Enter function test mode and perform key
stuck closed (active). (button) test to determine which button is at
fault. Carefully free the and perform the test
again. If button is free but the key struck code
still exists, replace electronic control.
Posted on Sep 25, 2009
Tips for a great answer:
Jun 08, 2016 | Frigidaire Dryers
Mar 28, 2016 | Frigidaire FASE7073LW Affinity 7.0 cu ft...
Hello friend, thanks for your post!
Based off what you have described your Frigidaire dryer is displaying an error code of E61. I understand that you have replaced the circuit board and you are still receiving the error code. An E61 means that your heater relay as had a failure which could be a potential problem with your heater relay or a wiring harness. You may need to seek professional assistance with proper troubleshooting this will help you to avoid any further unnecessary part purchases. If you need help locating a local technician you can visit your manufacturer's website for a list of available technicians. -Matt
Aug 05, 2015 | Frigidaire Dryers
Apr 25, 2014 | Frigidaire Dryers
Dec 01, 2013 | Frigidaire Electric Dryer
Nov 01, 2013 | Frigidaire Washing Machines
Sep 23, 2013 | Frigidaire Electric Dryer
Hello Curtis - Typically, error code E61 indicates a Heater Relay failure. At first the heater was grounded, and now possibly the heater relay. When the heater grounded it could have shorted the relay as well. Generally it is a good idea to have a professional take a look at it to get to the root cause. Cost of parts and technical expertise entailed in these types of replacements can be a bit tricky.
May 01, 2013 | Frigidaire Electric Dryer
Insufficient heating during washing Usually a heater failure but possibly the thermostat or NTC temperature sensor or wiring to either.
Apr 05, 2012 | Zanussi Washing Machines
Sep 25, 2009 | Electrolux EIED55H Dryer
64 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: