Question about Black & Decker D2030 Iron

1 Answer

Stopped heating My Black & Decker Digital Advantage D2030 type 1 iron just stopped heating too. I see that George says to get a new thermal cut-off device. Where does one get a new thermal cut-off device? If I take the thing apart, am I going to know right where it is and how to put in the new one? June

Posted by on

  • junebug4me Aug 18, 2009

    If they make irons that are not intended to be repaired, then I think I have bought my last Black and Decker product. I have not had the iron for very long and I did not get my money's worth. AND I do not like to add to the junk that is on the face of our earth.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 563 Answers

I work for Black & Decker. Any part that someone is telling you to purchase for that iron isn't from Black & Decker. Their irons are no designed to be repaired. If the iron is no longer heating, it needs to be replaced. Please call our customer service department at 800-231-9786 so that we may determine your warranty status.

I hope I've provided you useful assistance and that this information allows you to make an informed decision as to how to proceed from here. Please be sure to vote on my response. I hope I've earned a good rating from you today.

Please post a comment if you need additional assistance so that I can help you further.

Posted on Jul 29, 2009

  • Reginald Williams Aug 14, 2011

    no more black and decker for me; not interested in non sustainable products.

×

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

stonephoenix
  • 563 Answers

SOURCE: How do I clean my Black N Decker Advantage Iron

I work for Black & Decker customer service. Our number is 800-231-9786.

You can obtain a new manual for free by visiting www.useandcaremanuals.com. Below is the section from the manual on care and cleaning of your iron.

Care and Cleaning

This product contains no user serviceable parts. Refer
service to qualified service personnel.
It is not necessary to empty the water reservoir after each
use of the iron, if you iron frequently.
To empty the iron, hold the iron over the sink with the tip
pointing down. Water will stream out of the water fill
opening.

TO CLEAN THE OUTSIDE SURFACES

• Unplug and allow iron to cool completely. Wipe the
soleplate and outer surfaces with a soft cloth
dampened in water and a mild household detergent.
Never use abrasives, heavy duty cleansers, vinegar, or
scouring pads that may scratch or discolor the iron.

• After cleaning, iron with steam over an old cloth to
remove any residue from the steam vents.
ABOUT THE SELF-CLEANING SYSTEM

• Use the self-cleaning system to flush out minerals and
lint. If lint is allowed to accumulate in the vents, it can
scorch and cause brown spotting.
For Models D2000 and D2020: Clean about once a
month.
For Models D2010, D2030 and D2035: A "CLEAN"
indicator will appear in the digital display to notify you
when your iron needs cleaning (A).

• Fill the iron as described in "How to Use" but keep the
water level below the MAX line. Plug in the iron, set
the temperature to 6, and stand the iron on its heel
rest. Allow to heat about 3 minutes.

• Unplug the iron and take it to a sink. Holding it
horizontally over a sink, move and HOLD the variable
steam dial in the CLEAN position ( ). There may be
some hissing and spitting while self-cleaning. This is
normal.

• Stay clear of HOT steam and boiling water as it comes
out of the vents while lint, scale, and minerals flush
through! Continue to hold the variable steam dial in
the CLEAN position until all the water has emptied.
If necessary, rock the iron side to side and front to back
to empty it.

• When finished, release the variable steam dial, stand
the iron on its heel rest, and plug it in. Heat for about
2 minutes to dry out any remaining water then unplug.

I hope I've provided you useful assistance and that this information allows you to make an informed decision as to how to proceed from here. Please be sure to vote on my response. I hope I've earned a good rating from you today.

Please let me know if I can be of further assistance.

Posted on Jul 04, 2009

VOTIT
  • 2071 Answers

SOURCE: Black & Decker Iron - Steam Advantage - won't turn on

Just open your flat iron and locate the face plate contactor that has a soot burn causing the filament not to heat,use a sand paper to clean the contact from soot burnt,this the common problem of a flat iron...


Hope this may help;

Regards,
VOTIT

DON'T FORGET TO RATE;

Posted on Aug 10, 2008

  • 1 Answer

SOURCE: Does anyone know how to

I think I have the solution now! 
 
First of all, remove the temperature knob. Than remove the temperature indicator (it's like a little disc). Theres a hidden screw under the temperature indicator! Remove that screw and continue with your fixes.

I hope it could help you.
Jardel

p.s. - Sorry for my noob english...

Posted on Mar 07, 2009

  • 1 Answer

SOURCE: iron saying "error"

my **** is to big for my girls friends ***** how do i get it in?

Posted on Sep 19, 2009

  • 2 Answers

SOURCE: The Clean light on my Black & Decker Digital

I found a previous answer on FixTa.com that had a link to the owners manual for my iron. The info I needed was there and my problem is resolved!

Posted on Jan 13, 2010

Testimonial: "Exactly what I needed..."

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

MY BLACK & DECKER D2030 DOES NOT POWER ON?


my black nd decker iron lights up but will not heat.

Jan 01, 2013 | Black & Decker D2030 Iron

1 Answer

The Clean light on my Black & Decker Digital Advantage iron has come on and I can't find my manual. How do I 1) clean it and 2) get the light to turn off?


I found a previous answer on FixTa.com that had a link to the owners manual for my iron. The info I needed was there and my problem is resolved!

Jan 12, 2010 | Black & Decker D2030 Iron

1 Answer

We dropped the iron off the ironing board onto the floor, and now it won't heat up.


We located a Black & Decker Service Center here in our town and will be dropping it off tomorrow.

Dec 06, 2009 | Black & Decker D2030 Iron

1 Answer

Same Issues with my Black/Decker 2030


change the thermal fuse inside iron that's why not getting hot. thermal fuse blown up due to overheat inside.

Aug 19, 2009 | Black & Decker D2030 Iron

1 Answer

Need the repair manual for a black and decker digital advantage iron. I will turn on but will not heat. rmsc


I work for Black and Decker customer support. Our customer service phone number is 1-800-231-9786.

If the iron isn't heating, it needs to be replaced. Unfortunately, the unit can't be repaired. The unit comes with a one year warranty from the date of purchase. Please call the number above so that we can determine your warranty eligibility and help you any way we can.

I hope I've provided you useful assistance and that this information allows you to make an informed decision as to how to proceed from here.

Please let me know if I can be of further assistance.

May 04, 2009 | Black & Decker D2030 Iron

1 Answer

Does anyone know how to open a Black and Decker digital advantage iron? - I suspect a loose connection where the power cord attaches to the iron and have taken the two screws out of the back plate but the...


I think I have the solution now! 
 
First of all, remove the temperature knob. Than remove the temperature indicator (it's like a little disc). Theres a hidden screw under the temperature indicator! Remove that screw and continue with your fixes.

I hope it could help you.
Jardel

p.s. - Sorry for my noob english...

Sep 21, 2008 | Black & Decker D2030 Iron

1 Answer

Iron just stopped getting hot


The thermal cutoff device blew and must be replaced. It acts like a fuse when the iron gets too hot. Thay are very cheap and it would be well worth replacing. Hope this was helpful.
George

Apr 16, 2008 | Black & Decker D2030 Iron

2 Answers

Iron D2000C type 1 black decker


the folowing reason for not working 1. the connection may be lose 2. the heating coil is gone 3. inside connection may be lose.

Sep 17, 2007 | Black & Decker D2030 Iron

Not finding what you are looking for?
Black & Decker D2030 Iron Logo

Related Topics:

957 people viewed this question

Ask a Question

Usually answered in minutes!

Top Black & Decker Irons Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

tfelton3

Level 2 Expert

183 Answers

nmccully

Level 2 Expert

193 Answers

Are you a Black & Decker Iron Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...