Question about Kenmore Kitchen Ranges
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: my kenmore elite electric slide
Need the model number (specifically the 1st 3 digits ) too determine who manufactured it for Sears then can tell what the fault code means for that brand. You might try shutting the breaker off 20-30 mins see if it resets itself.
Posted on Jul 09, 2008
I had the same F30 error problem but fixed it. On my professional series Frigidaire, there are 2 resettable red button locations. I discovered that only one is in the rear of the oven. After going to the breaker box and shutting off the power, pull out the stove enough to work, unscrew the rear screws (I didn't unscrew all of them, just enough to work back there). The small red button is on a small black round piece with two purple wires feeding to it. That was not my problem. Mine was the other red button behind the control panel. Pull off all 4 knobs, unscrew by hand the large black rings that are underneath the knobs, pull out the whole panel. Look back and right (below where the right knobs were located) to find the 2nd red small button. Push to reset. Check this one first since it is easier to do.
Posted on Feb 17, 2009
Place a hammer handle between the door and the frame at the hinges..
Push on the door, carefully.
This usually works to re-seat the door hinges.
Posted on Mar 08, 2009
this is a super common problem for all convection ovens . your motor is going bad . you can replace it yourself as long as your handy . parts can come from searsparts .com or any appliance parts store . any repair person you call to do the job should have no problem . these motors go bad every 10 years or so , or more if you use it a lot ..........Please if this answer helped , please rate this 3 or 4 stars . and keep me in the paid answer department . A 1 or 2 may knock me down into the unpaid ranks. Thanks Cactus Bob .
Posted on Mar 17, 2009
i phoned Sears about error code f13 on a gas range, and was told to unplug the range for 30 minutes. i think she meant 30 seconds - to reprogram the microchip. i unplugged it for 15 minutes or so, then reconnected, and it worked.
Posted on May 28, 2009
Tips for a great answer:
Nov 28, 2015 | Kenmore Kitchen Ranges
Aug 05, 2015 | Kitchen Ranges
Aug 31, 2014 | Kitchen Ranges
Dec 03, 2012 | Kenmore 91112 / 91114 / 91117 Electric...
May 19, 2011 | Kenmore 46123 Stainless Steel Electric...
Mar 19, 2010 | Kenmore Elite Oasis 6809 Electric Dryer
Aug 27, 2009 | Kenmore Elite HE4 Electric Dryer
Jul 09, 2008 | Kitchen Ranges
Apr 11, 2018 | Kenmore Kitchen Ranges
38 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: