Question about Cell Phones

1 Answer

Engine intake manifold gasket set has not arrived & the order was made in early december

Delivery estimate was Dec 12 to Dec 19, can you advise.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cell Phones Master
  • 41,409 Answers

We can not it is not 12 -19 yet is it .

Posted on Dec 14, 2016

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Missing one item on order #104-1404909-1477818 Was ordered on December 15 arrived on December 20


your on wrong site either notify seller or delivery service of missing item or non delivery

Dec 22, 2016 | Washing Machines

1 Answer

I PLACED AN ORDER ON DEC 19 -I PAID FOR 1 DAY SHIPPING WHY DOES MY ORDER STATE IT WILL NOT BE HERE UNTIL DEC 28 I AM VERY UOSET THIS IS A CHRISTMAS PRESENT


not a problem for fixya site
you have to contact the supplier direct by phone , state that you specifically paid for 1 day delivery and it has not yet arrived and is is the 21st december , one day over due

Dec 21, 2016 | Computers & Internet

1 Answer

How to fix oil leaks in chevy ss impala 1996



Instructions

1. Removal

Unscrew the bolt that holds the negative connection to the Impala's battery. Set this bolt aside for later use.

Remove the engine cover to access the intake manifold and manifold gasket. Disconnect the throttle body inlet duct from the engine.

Twist off the radiator cap to allow draining of the coolant to flow more smoothly. Place an empty container beneath the radiator's drain plug, and remove this plug. Allow all of the engine coolant to drain into the empty container. Replace the drain plug once you are finished.

Tag all of the electrical wiring and hoses before removing so that reconnection is precise to factory settings. Remove these parts, individually, from the intake manifold.

Loosen the bolts that hold the intake manifold to the Impala's engine block. Lift the intake manifold from the block once all bolts have been completely removed.

Use the flat-head screwdriver to pry the old intake manifold gasket from the engine block. Discard this part once you have removed it.

Clean the engine block thoroughly with the engine degreaser and linen cloth. If necessary, use a gasket scraper to remove excess buildup and grime.

2. Installation

  • Coat the top and bottom of the new intake manifold gasket with a chemical sealer so that it bonds to the engine block securely. Position this new manifold gasket so that it lines up perfectly with the cylinder ports of the Impala's engine block.

Place the old intake manifold on top of the newly-installed manifold gasket until it aligns with all of the holes of the cylinder flanges and manifold gasket.

Attach all of the bolts with your hand to the manifold. Once all bolts have been positioned, use a torque wrench and apply 15 foot-pounds of pressure to the bolts to secure the manifold into place.

Reconnect all of the necessary hoses and electrical wiring to the intake. Pour the engine coolant back into the radiator.

Reattach the engine cover on top of the intake manifold and engine block. Start the Impala's engine and check for any leaks around the new intake manifold gasket.

Jul 08, 2012 | 1996 Chevrolet Impala SS

1 Answer

2000 Dodge Grand Caravan 3.3L Engine. few months ago I had coolant boiling over my surge tank. Initially the radiator cap lost its proper pressure capability but it wasn't the case but notice radiator had...


You can purchase an intake manifold gasket set from a local parts store. It should have the upper and lower intake gaskets contained in it. I see you plan on doing the valve cover gaskets as well. It might be a good idea to replace the plugs and wires at the same time to save some trouble down the road. I would recommend doing the oil change and change the thermostat at the same time as well.

Mar 07, 2017 | 2000 Dodge Caravan

2 Answers

Pontiac bonneville 3.8 vin code k . I replaced the in take gasket because it was leaking water between the top an bottom intakes going into the cyclinder heads its still leaking after all this work ive...


This is the entire task for it. It sounds like you might not have torqued it correctly, or your intake is cracked. But take a look at all of the info:

VIN K Engine On these engines, the upper and lower intake manifolds must be removed separately.
  1. Properly relieve the fuel system pressure, as outlined in Section 5 of this manual.
  2. Disconnect the negative battery cable.
  3. Drain the cooling system into a suitable container.
  4. Remove the fuel injector sight shield and air intake duct.
  5. Tag and disconnect the spark plug wires on the right side of the engine and position aside.
  6. Remove the manifold vacuum source.
  7. Remove the fuel rail.
  8. Remove the EGR heat shield.
  9. Unfasten the cable bracket-to-cylinder head mounting bolt.
  10. Disconnect the throttle cable.
  11. Remove the throttle body support bracket.
  12. Unfasten the upper intake manifold bolts, then remove the upper manifold.
This engine has two bolts which are hidden beneath the upper intake. These bolts are located in the right front and left rear corners of the lower intake manifold. This is why it is necessary to remove the upper before servicing the lower manifold.
  1. Disconnect the upper radiator hose.
  2. Remove the alternator, as outlined in Section 2 of this manual.
  3. Remove the drive belt tensioner.
  4. Remove the EGR valve outlet pipe.
  5. Unfasten the intake manifold bolt, then remove the manifold from the vehicle. Remove and discard the gaskets. Thoroughly clean the gasket mating surfaces, intake manifold bolts and bolt holes.
To install:
  1. Position a new gasket, then place the lower intake manifold over it. Apply a suitable threadlocking compound to the bolts, then install them. For 1995 vehicles, tighten the bolts twice, to 88 inch lbs. (10 Nm), in the sequence shown in the accompanying figure. For 1996-97 vehicles, tighten the bolts to 11 ft. lbs. (15 Nm), in the sequence shown in the accompanying figure.
    1. Install the EGR valve outlet pipe.
    2. Install the drive belt tensioner.
    3. Install the alternator.
    4. Connect the upper radiator hose.
    5. Position the upper intake manifold on the lower manifold. Install the retaining bolts and tighten to 89 inch lbs. (10 Nm).
    6. Install the throttle body support bracket, then connect the throttle cable.
    7. Install the cable bracket-to-cylinder head mounting bolt.
    8. Install the EGR heat shield.
    9. Install the fuel rail.
    10. Install the manifold vacuum source.
    11. Connect the right side spark wires on the right side of the engine.
    12. Install the fuel injector sight shield and air intake duct.
    13. Fill the cooling system with the proper type and amount of fluid.
    14. Connect the negative battery cable. Start the engine and check for leaks. Check the cooling system, and add as necessary.

Oct 18, 2009 | 1995 Pontiac Bonneville

1 Answer

02 GRAND PRIX 3.8 "K" VIN MISSFIRE ON CYLINDER 5 MECHANIC REPLACED F.I. CHANGED WIRE AND PLUG AND COIL SERVICE LIGHT STILL ON AND FLASHES INTAKE MANIFOLD REPLACED A COUPLE YEARS AGO 10O K ON ENGINE


take plug,wire,coil and swap with another cylinder if still #5 missing could be head gasket or intake gasket leaking could also be fuel delivery problem

Sep 26, 2009 | 2002 Pontiac Grand Prix

1 Answer

Intake manifold gasket / replace


3.8L Engine

NOTE The 3.8L (VIN K) non-supercharged engine uses a two-piece intake manifold consisting of an upper air plenum which mounts the throttle body and a lower intake manifold assembly which houses the fuel injectors. The 3.8L (VIN 1) supercharged engine uses a similar lower intake manifold. The supercharger serves as the upper manifold.
Lower Manifold

NOTE Two bolts which fasten the lower intake manifold to the cylinder head are accessible only after the upper intake manifold is removed. These bolts are located in the right front and left rear corners of the lower intake manifold. Remove the upper intake manifold to service the lower intake.
The 3.8L (VIN 1) supercharged engine uses a manifold similar to the 3.8L (VIN K), but the supercharger serves as the upper manifold.
  1. Disconnect the negative battery cable.
  2. On 3.8L (VIN 1) engines, remove the supercharger assembly. Please see the procedure in this section.
  3. Remove the upper intake manifold using the procedure above.
  4. Remove the EGR outlet pipe from the intake manifold.
  5. Detach the engine coolant temperature sensor wiring harness from the sensor.
  6. Remove the lower intake manifold bolts and carefully lift off the manifold.

To install:


0900c15280269f1b.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Lower intake manifold bolt torque sequence-3.8L (VIN K) engine
  1. Clean all parts well with degreaser, especially the gasket seal surfaces on the upper and lower manifold pieces and between the lower manifold and the cylinder heads..
  2. Install new gaskets to the cylinder heads and new seals to the engine block. Carefully lower the manifold into place. Apply thread-locking compound to the bolt threads. Make sure to install the two hidden bolts in the lower intake manifold. Hand start all bolts, then torque evenly to 11 ft. lbs. (15 Nm). Follow the toque sequence, starting in the center, then working outwards in a circle.
  3. Install the remaining components in the reverse order of the removal process.

Upper Intake Manifold (Plenum)
  1. Disconnect the negative battery cable.
  2. On 3.8L (VIN 1) engines, remove the supercharger assembly. Please see the procedure in this section.
  3. Tag for identification, then remove the right side spark plug wires.
  4. Disconnect the ignition wires from the fuel rail.
  5. Remove the fuel rail. Please see Section 5.
  6. Remove the cable bracket from the intake manifold.
  7. Remove the throttle body.


NOTE Two bolts which fasten the lower intake manifold to the cylinder head are accessible are accessible only after the upper intake manifold is removed. These bolts are located in the right front and left rear corners of the lower intake manifold.
  1. Remove the upper intake manifold bolts and carefully lift the upper intake manifold from the engine.



0900c15280269f1c.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Upper intake manifold and bolt torque sequence-3.8L (VIN K) engine
To install:
  1. Clean all parts well with degreaser, especially the gasket seal surfaces on the upper and lower manifold pieces.
  2. Install new gaskets to the cylinder heads and new seals to the engine block. Carefully lower the manifold into place. Make sure to install the two hidden bolts in the lower intake manifold. Hand start all bolts, then torque evenly to 89 inch lbs. (10 Nm). Follow the torque sequence, starting in the center, then working outwards in a circle.
  3. Install the remaining components in the reverse order of the removal process.

Sep 11, 2009 | 1999 Buick Regal

1 Answer

Where is the Starter motor on the 2002 Lexus LX470


The starter for this car is located in whats called the valley of the engine. which is below the intake manifold. in order to get to starter u have to remove the intake manifold.

Parts needed:
Starter
intake manifold gasket (DO NOT REUSE OLD GASKET)

Apr 30, 2009 | Lexus LX 470 Cars & Trucks

1 Answer

Intake manifold gasket needs replaced


it is a pretty basic job the important things to remember is to remove everything sequentially. in other words make a note of which bolts go where. remove the intake and clean both mating surfaces, usually you dont need gasket sealant for an intake manifold. reassemble in the order removed thats about it.

Jan 13, 2009 | 1984 Toyota Corolla

Not finding what you are looking for?
Cell Phones Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cell Phones Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

yadayada
yadayada

Level 3 Expert

74945 Answers

William Alequin

Level 3 Expert

922 Answers

Are you a Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...