Question about Kenmore Dishwashers

Open Question

Kenmore elite ultraclean dishwasher part pom 20. What is it?

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
localwonder
  • 6784 Answers

SOURCE: dishes are not clean

HI, there are three different reasons why this will occur in this type of unit. inspect these areas carefully.

1. Not enough water
If there is not enough water, the dishes would not get cleaned. This could be caused by a partially closed water shut-off valve (located under the sink), or a faulty dishwasher water valve (located at the bottom of the dishwasher, behind the kick panel, on either side).

2.Clogged spay arms
There is usually two, sometimes three spray arms in a dishwasher. Make sure there is no debris blocking the holes inside each spray arm.

3. Water temperature is too low
To get the best results, the water has to be at 120 degrees Fahrenheit when entering the dishwasher. Make sure the temp is proper.

Posted on Jul 19, 2009

Ad
  • 572 Answers

SOURCE: kenmore ultraclean \dishwasher\model 655.16033402

if it blinks 7 times. there is too cold coming in. if not ur heater is faulty. theres a heater kit for this problem that comes with a board.

Posted on Feb 06, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

We cannot start our brand new Kenmore Elite Ultraclean dishwasher. The only lihgt that comes on is the flashing red lock light. no other buttons work. What do i do?


Look at the top of the dishwasher door. There may be instructions on how to lock/unlock the controls there. For example, mine says to hold the Heated Dry button for 4 seconds to toggle between lock/unlock.

Jan 19, 2014 | Computers & Internet

1 Answer

My Kenmore Elite Ultra Wash Dishwasher keeps shutting off before entering the cycle. I have repositioned dishes, even emptied it, changed cycle and tried everything. When I press the start light flashes...


I too had problems with the Kenmore Elite (aka Bosch). The issue was solved by replacing the Lock Sensor on the door. After replacing the sensor the dishwasher has been working. Hope this helps.

Oct 08, 2013 | Kenmore Elite 24" Built-In Dishwasher with...

1 Answer

Kenmore elite dishwasher will not drain completely


Hi,
Here is a tip that I wrote that will help you with your dishwasher not drainingproblem...

Dishwasher Problems - Waterwill not drain out

heatman101

Aug 02, 2011 | Kenmore Elite Stainless Steel 24" BuiltIn...

1 Answer

Kenmore ultraclean \dishwasher\model 655.16033402


if it blinks 7 times. there is too cold coming in. if not ur heater is faulty. theres a heater kit for this problem that comes with a board.

Feb 06, 2010 | Dishwashers

2 Answers

Reset sequence for Sears Kenmore Elite 630.1630?


Unplug for 40 minutes to reset this unit.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Jan 20, 2010 | Kenmore 24 in. 16032 Built-in Dishwasher

1 Answer

Dishes are not clean


HI, there are three different reasons why this will occur in this type of unit. inspect these areas carefully.

1. Not enough water
If there is not enough water, the dishes would not get cleaned. This could be caused by a partially closed water shut-off valve (located under the sink), or a faulty dishwasher water valve (located at the bottom of the dishwasher, behind the kick panel, on either side).

2.Clogged spay arms
There is usually two, sometimes three spray arms in a dishwasher. Make sure there is no debris blocking the holes inside each spray arm.

3. Water temperature is too low
To get the best results, the water has to be at 120 degrees Fahrenheit when entering the dishwasher. Make sure the temp is proper.

Jul 19, 2009 | Kenmore 24 in. 15079 Built-in Dishwasher

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Dishwashers Experts

Ken Johnston
Ken Johnston

Level 1 Expert

56 Answers

Fred Sops

Level 2 Expert

272 Answers

D. E. Hev

Level 3 Expert

1179 Answers

Are you a Kenmore Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...