Question about Televison & Video
Flashing red light (standby)?
Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
If blinks continue without any pause, the main board is faulty.
Search the site by type in the "brand name" to your device, in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.
Posted on Dec 13, 2016
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Resetting the main unit
Use this procedure to reset all the receiver's settings to the factory default. Use the front
panel controls to do this.
1 Switch the receiver into standby.
2 While holding down the TONE button, press and hold the STANDBY/ON button for about three seconds.
3 When you see RESET? appear in the display, press ENTER .
OK? shows in the display.
4 Press SYSTEM SETUP to confirm.
OK appears in the display to indicate that the receiver has been reset to the factory default
Mar 04, 2011 | Pioneer VSX-815-K Receiver
Feb 25, 2011 | Pioneer VSX-D912 Receiver
Feb 19, 2011 | Pioneer VSX-D912 Receiver
Dec 04, 2010 | Pioneer VSX-D912 Receiver
Nov 26, 2010 | Pioneer VSX-D912 Receiver
Dec 29, 2008 | Pioneer VSX-D912 Receiver
May 22, 2007 | Pioneer VSX-D912 Receiver
33 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: