Question about OEM Systems Motorola Bluetooth Headset H500 [OEM] , Baby Pink Headset

1 Answer

Bluetooth headset now will not pair up with my LG enV

Just received bluetooth headset yesterday (BlueAnt Q1) and I pulled it out of the box and paired it with my LG enV(original) phone. Everything went fine, phone searched and found the headset. While messing around with the Bluetooth Menu on my phone I accidentally removed headset from phone. So I reset the headset and tried the process again and now the two will not pair. Have removed and replaced battery from phone and everything and still no luck. Is there any suggestions on something that I can do to get this working again?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 49 Answers

Go to this page, it will answer any question concerning the blueant .. including pairing to your phone .. activating your blueant etc http://www.blueant.com.au/index.phpalso gives you step by step instructions on codes, pairing etc

Posted on Apr 09, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to connect my Q1 to iphone


With the device on press the MFB and when it says say a command say pair me. Then go to settings/general/bluetooth on the iphone and make sure bluetooth is on. The Q1 will show up click it and wait, the iphone will take care of the rest. (remember you won't be able to voice dial unless you have the iphone 3gs or iphone4.

Rylan

Sep 27, 2010 | Blueant Q1 Bluetooth Headset

1 Answer

Wont connect to iphone


Try resetting the device, with the Q1 on press the vol -/+ and the MFB all at the exact same time. When you get a consistent rapid flash the device has been reset and will go automatically into pair mode. Then go to settings/general/bluetooth and select the Q1 when it comes up. If it does not come up then power cycle your iphone and go back to the bluetooth menu.

Rylan

Sep 27, 2010 | Blueant Q1 Bluetooth Headset

1 Answer

How to set up q1 to my evo?


I would reset the Q1 first, to do that with the device on press the vol -/+ and MFB all at the EXACT same time. Ensure the buttons are not held simply clicked all at once like a mouse to a computer. When you get a consistent rapid flash the device has been reset and will automatically go into pair mode. When this happens go to your phones bluetooth menu and search/scan for devices, select the Q1 when it shows up and enter the pin code 0000 if prompted. In the pairing profile it will say BlueAnt Q1 v.....something. That is the firmware the device has on it, if it is anything other than 8.21 go to www.myblueant.com, select support and firmware updates and download the most recent firmware for the device (must be done on a 32 bit windows PC)

Rylan

Sep 07, 2010 | Blueant Q1 Bluetooth Headset

1 Answer

How do you pair a blueant q1?


With the device on and in your ear press the MFB, when you hear say a command say pair me. When is says do you want to enter pair mode say yes. Then go to your phones bluetooth menu, search/scan for devices and enter the pin code 0000 if prompted.

Rylan

Aug 07, 2010 | Blueant Q1 Bluetooth Headset

1 Answer

I just purchased a Samsung Jack and paired my BlueAnt Q1 Bluetooth to it on Friday. I have noticed that when I receive or make a phone call using the bluetooth it goes straight through the phone and does...


Go to this page, it will answer any question concerning the blueant .. including pairing to your phone .. activating your blueant etc http://www.blueant.com.au/index.phpalso gives you step by step instructions on codes, pairing etc

Mar 25, 2010 | Samsung Jack Cell Phone

2 Answers

I lost the passcode to my bluetooth i tried 0000 9999 and all others no pairing its a bluetooth 10799 and it goes in ciggerrette lighter and u can talk out loud please help dont want a ticket lol


How to connect or pair a Blueant Bluetooth handfree.

1. Switch off the Blueant:
i.e. push the microphone inside the Blueant.

2a. Press and hold the GREEN telephone symbol (or Accept) pushbutton
On the Blueant flat face for 8 seconds. (this makes unit go into “pairing” mode)

2b. at the same time switch Power On to the Blueant by pushing out
the microphone on the side of the Blueant.

3.The Bluetooth Indicator will turn a blinking red/blue,
when you see this, release the Accept Button .
The Blueant is now in “pairing” mode.

4. Get you mobile in Bluetooth search mode to pair with a new device.


5. The Blueant will request your mobile device for a password.

6. Enter the password= 0000 , the devices now will be paired.

7. Set the Blueant as a trusted/authorized device, if this is option in your phone.

Mar 18, 2010 | Blueant Supertooth Light Bluetooth Speaker...

3 Answers

I cannot pair my LG phone to my Blueant X3 micro bluetooth headset. The phone recognizes it, but doesn't let me pair. During the attempt, I receive "device pairing incomplete" then I am asked to enter a...


You have to turn off the Dare's autopairing feature. The Dare was designed to autopair with devices using the 0000 code. The Blueant X3 uses the code 1234 so the autopair won't work.

Once you turn the feature off, start the pairing process all over again and it will work.

Unfortunately you'll have to turn the X3 on through the Dare's bluetooth menu every time you want to use it. You can't use the "on" button on the X3.

Sep 26, 2009 | LG Dare VX9700 Cell Phone

1 Answer

Lg env v pairs with jawbone but won't connect. is it the code?


I have had the same issue with MY Samsung bluetooth headset.

Here's the sequence that works for me:

  1. Delete the headset under the bluetooth menu.
  2. Turn off the bluetooth
  3. turn on the blue tooth
  4. Add the headset back. The default pair code for most devices is "0000" or "1234"
  5. Try to enable/connect. If it fais, simply power off the enV.
  6. Power on and try to connect again (just connect, not pair)
  7. Headset will then pair.
KingGypsy in Phx.

Jan 19, 2009 | LG enV VX9900 Cellular Phone

1 Answer

Pairing Problem with Cell Phone and Bluetooth earpiece


Not all bluetooth headsets are compatible. These are:
BlueAnt Wireless X3 micro Bluetooth Headset.
BlueAnt Wireless V12 LCD Bluetooth Headset.
BlueAnt Wireless Z9 Bluetooth Headset.
From:
http://www.yourwirelesssource.com/buy/accessories/cat/28/model/1005_300368/accessory/291758?source=google_base
a04fa9e.jpg

Mar 28, 2008 | Cell Phones

1 Answer

Bluetooth problems


most bluetooth default passwords are 0000
it should pair up.

Feb 12, 2008 | LG enV VX9900 Cellular Phone

Not finding what you are looking for?
OEM Systems Motorola Bluetooth Headset H500 [OEM] , Baby Pink Headset Logo

401 people viewed this question

Ask a Question

Usually answered in minutes!

Top OEM Systems Radio Communications Experts

eradiostore
eradiostore

Level 3 Expert

1646 Answers

Brad Brown

Level 3 Expert

15478 Answers

Mike Charette

Level 3 Expert

1795 Answers

Are you an OEM Systems Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...