Question about Televison & Video
Firmware corrupted. A firmware update is necessary. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Firmware (Software) update procedure of many popular brand devices are given in detail.
Posted on Dec 12, 2016
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
I don't have a code book for you, but I can tell you how to program the RCR660 using the automatic programming feature.
Programming RCA model RCR660 (no code search button)
While following these instructions, keep the following in mind:
device = the component you wish to control with your remote (TV, DVD, VCR, etc.)
DEVICE = the button labeled for the component you wish to program
1. Turn on the device you wish to program.
2. Turn off all other devices in the general vicinity.
2. Press and hold DEVICE
3. While holding DEVICE down, press ON/OFF and hold them both down until the LED turns on for that device.
4. Release both buttons.
5. Point the remote at the device, press and release PLAY and wait 5 seconds or until the LED stops flashing.
6. If the device does not turn off, then continue to press PLAY and wait the required interval (for a maximum of 20 times) until the device turns off.
7. When the device turns off, press REVERSE, wait two seconds and continue doing this until the device turns back on.
8. To finish programming, press and hold STOP until the LED turns off.
Posted on Dec 31, 2007
all you have to do is press and hold code search when the light shows up let go of code search then press VCR and it will blink onces and let go of VCR and press OFF/ON about 50 times and then press enter onces and there you go
Posted on Mar 07, 2008
I don't know if you guys even need this advice anymore, as it's 1-2 years late, but if your universal remote has a VCR setting, the Emerson 13" CRT TV/VCR combo I have operates under that mode.
The code I used was 002. These may also work: 278, 184, 479, 000, 121, 211, 037, 043, 061, 208
Remember, program your remote as if you were setting up a VCR (and NOT a TV). For instance, on my GE universal, I hold the "code search" button down until I get a steady light. I hit VCR, and then I entered 002. Works like a charm.
Posted on Mar 05, 2010
hi! i have a couple of codes for your tv, just try them,
1145, 3095, 1027, 2064, 3105, 1124, 2078, 3088, 1296, 2213, 3147, 1150, 2092, 1464, 2408, 1465, 2260, 1046, 1465, 1004, 1007, 1018, 1027, 1047, 1056, 1057, 1059, 1060, 1061, 1103, 1124, 1145, 1150, 1153, 1279, 1296, 1387, 1464, 1483, hope this helps! goodluck!!!!
Posted on Jun 07, 2010
Tips for a great answer:
Dec 24, 2015 | One For All Televison & Video
May 07, 2010 | Sylvania DVC840G DVD Player/VCR
Feb 19, 2010 | Samsung SV-DVD3E DVD Player/VCR
Dec 28, 2009 | Philips Magnavox DVD/VCR Dual Player
Aug 10, 2009 | Symphonic WV806 DVD Player/VCR
Sep 26, 2008 | Televison & Video
Sep 24, 2008 | Philips MRV700VR DVD Recorder/VCR
Jul 25, 2008 | Samsung DVD-V4600 DVD Player/VCR
Aug 19, 2007 | One For All URC-3021 Remote Control
32 people viewed this question
Usually answered in minutes!