Question about D-Link SECURESPOT DSD-150 (790069291944) Firewall

Open Question

DSD 1110 (+2) doesnt switch on. I switched it off yesterday evening due to bad weather and I also disconnected it. This morning when I connect it, it doesn't come on at all.

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 95 Dodge stratus..2.4 L. The past week it was having trouble starting. After turning key off then on..3..sometimes 4.. it would start right up. Next morning had to do same thing. Yesterday I took...


Yes, it has to do with the ignition switch. but just as possible could be a battery connection from the battery to the switch. So, sometimes turning key to ON causes no dash lights or warning lights to come on?
That sounds like a bad switch, or more likely, a bad battery connection or a bad connection between the battery and the switch. First thing to do is check the charge of the battery, it must register at least 12 volts. 12.6 volts is the ideal for a good and fully charged battery. Clean and tighten all battery connections.

Sometimes when you have a poor connection, from looseness to corrosion, and you turn key and see all warning lights and gauges come on, and then turn key to start and everything goes black...that can happen because the power surge causes the bad connection to come apart. So check for loose or corroded connections.

Mar 02, 2018 | Dodge Cars & Trucks

2 Answers

Car not starting


Disconnect the Battery and Charge it as a STAND ALONE CHARGE (not connected to the car), You may have a bad ECU.

Jun 19, 2014 | 2002 Volkswagen Golf

1 Answer

My horn will not quit blowing on my 2007 jeep wrangler, I disconnected the battery and left it over night, I connected the battery and it continues to blow. It got wet inside yesterday due to rain. How do...


sounds like your switch is stuck on push the horn a couple times to see if it will stop if it doesnt you need to replace the switch which is in the steering wheel or you can take the fuse out or just unhook the horn

Sep 15, 2011 | 2007 Jeep Wrangler Unlimited Rubicon 2...

1 Answer

What is the knob on the back used for?


Good morning, afternoon, evening or night; whatever time of day you are viewing this. Thank you for choosing FixYa to answer your question. You want to know what the knob on the back is used for? I believe that's the weather band fine tuning knob. This is used for switching between weather radio frequency channels (e.g. 162.400 MHz or 162.550 MHz). Use this to switch to a weather channel that is in your listening area. I hope this answers your question and thank you for choosing FixYa as your one-stop solution spot for all of your problems. Come back and visit our site again soon. Have a good morning, afternoon, evening or night; whatever time of day you are viewing this.

Mar 05, 2011 | Emerson RP6247S FM/Weather/AM/TV Radio

1 Answer

It has a switch that changes it from 2 hi to 4hi & 4lo. The problem is that it doesnt shift into 4 wheel drive.


Even though the electrical switches are working, the vacuum lines may be the source of the trouble. Inspect all vacuum hoses. Look for loose connections, broken t fittings, weathered or mushy hoses, There is a vacuum operated switch under the vehicle that engages the front axle. Locate this switch and make sure the vacuum line is still connected at both ends. This hose is bad about coming loose.

Dec 30, 2010 | 1996 GMC Suburban

3 Answers

Free to Air on a Dstv


how can i have codes to tune east african channels plis for free. am using dsd 1131 decoder of dstv. am in johannesburg.

Jun 18, 2010 | Televison & Video

1 Answer

Speed switch doesn't work


hi, maybe you hve to replace the tack switch of your turntable even thougr you switch but the contactss maybe not in the connection,,

Apr 09, 2009 | JVC AL A158BK Turntable

1 Answer

Radio doesnt start.. Keylock?


take the removable front panel off

on the main unit you will see a small hole near the bottom on the right

this is the unit reset switch

you will need a paper clip or something similar to press the reset button

this should completely reset the head unit

hopefully this should sort it

Dec 30, 2008 | JVC KD-PDR31 CD-Receiver -I-Pod...

Not finding what you are looking for?
D-Link SECURESPOT  DSD-150 (790069291944) Firewall Logo

Related Topics:

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2263 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...