My dishwasher is showing a SC code. what is that

Check out the links

Error Codes > Ricoh > MPC305SPF > Code 524

Printcopy.info https://printcopy.info > brand=Ricoh > code=524
Code: 524 ; Description: Transport motor error. The machine detects a High signal from a transport motor lock detection for 2 seconds after the transport motor ...

Missing: 1600. ‎' Show results with: 1600.

RICOH Error Code List - mtechsinfo.com

mtechsinfo.com http://www.mtechsinfo.com > files > Ricoh Erro... PDF Image compression errorHard disk drive error Aficio 551, 551P, 700, 700P SC- ... SC-524. Duplex end fence drive problem. SC-530. Bypass motor locked or fuse FU106 ...
14 pages

Error Codes > Ricoh > MPC306 > Code 524-00

Printcopy.info https://printcopy.info > brand=Ricoh > code=524-00
Code: 524-00; Description: Transport motor error The machine detects a LOCK signal from Transport motor for 2 seconds when the motor is activated. https://www.google.com/search?q=Ricoh+Aficio+MP+1600.+Error+SC+524

and finally
https://www.mtechsinfo.com/files/Ricoh%20Error%20Code%20List.pdf

..

https://howtofixit.net/samsung-washer-code-sc-or-5c/#:~:text=The%20error%20code%20is%20actually%205C%2C%20though%20it,triggered%20by%20a%20problem%20with%20its%20draining%20function.

Is the dishwasher working at all? Instead of telling me what you checked, tell me what it is doing right and what’s wrong.

https://www.youtube.com/watch?v=GtjphsCQ8CA

Call manufacturer - final page of manual shows their telephone numbers for you to call. Open the internet link below.

https://us.mieleusa.com/MieleMedia/docs/operatinginstructions/Dishwashers/Retired%20models%20manuals/Operating%20Instructions/Dishwasher%20G665_us.pdf

This code is not listed in any material I can find, it is a fairly common question on this site but no one seems to have an answer. Please call a service technician.

i think your sc code is wrong, on your display panel it will show u the sc code?

SC545 and SC 546 are fuser temperatyre error. pls. check thetmistor/ thermostats, connectors if thernistor are deffective replace thermistors. after replacement or checking of this parts do the SC reset. 107 # turn off copier then on after 5 sec.

I had a problem where my G842Plus dishwasher would run through the prewash and then the intake/drain light would start blinking and it wouldn't work. There would be water in the bottom of the dishwasher. After cleaning out various items to no avail, we called Miele technical support and they told us to reset the codes and then keep trying it over and over until it worked.
Here is how we reset the codes:

• Turn dial to stop/off
• Turn dial to Normal Plus
• Press Start
• Press power
• Then press the start button for one second and let go
  

The intake/drain light blinks. How do I fix this problem?