Question about JVC Televison & Video

1 Answer

I have a 37" JVC flat screen,.,.model # LT-37xm48,.,. i am unable to pick up channel 11,.,. which is a prime station in our area,.,.,. could this be fom being a "vhs" as to a "uhf"

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • JVC Master
  • 75,169 Answers

Do a reset to this tV, and then check. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts.
Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.

Posted on Dec 11, 2016


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have jvc tv model LT-24C660, I turn on tv massage come “no channels added yet. Please go to the installation menu to add channels.” How can I go to installation menu?

Do you have cable or satellite? Satellite uses only one station and all you have to do is select the station your satellite provider told you to use. If it is cable then go to your menu screen and look for "setup." That should get you going.

Nov 22, 2017 | JVC Televison & Video

1 Answer


What specific model of JVC multi-system TV do you have? What is the signal source?

The majority of the JVC multi-system TVs that I've researched only have analog tuners (NTSC, PAL). The AV-29LX is an example of the older JVC TVs. Since most over-the-air signals are digital, you will need a digital-to-analog OTA signal converter to watch any signal from an aerial TV. If you have a cable system that has upgraded to digital cable, you will need a cable box.

Converter boxes are harder to find but there are a few remaining. Here's one for the US: .

I wish that I had better news for you.

Cindy Wells
(A few low-power stations still broadcast in the analog format. However, you have to be really close to the station or have an outdoor antenna to have a chance at receiving the signal.)

Mar 30, 2014 | JVC 29" Flat Screen Multisystem TV

1 Answer

We have a JVC LT-37XM48 showing multi-colored horizontal and vertical lines.

replace the power supply...ebay sells them; the power supply has a number on it to tell you which one you need (be sure to leave the set unplugged for at least a day before you replace the power supply (to avoid a nasty shock from the charged up capacitors on the power supply board.

Dec 03, 2013 | JVC LT-37X688 37 in. LCD HDTV

1 Answer

JVC LT-37XM48 Black Screen

tried to check first the inverter board and the screen back light which may have dry joint connector.

Jul 26, 2012 | JVC Televison & Video

1 Answer

I have. Model LT-37xm48 I can get sound but no picture. Help the football games is on!!!

turn it off, turn it back on, after doing that 5 or 6 times, it will play for another 45 minutes. Dont buy any more JVC products.

Oct 30, 2010 | JVC Televison & Video

1 Answer

Unable to tune free view channels........... help !

Get a better Antena,like digital antena or a roof outside Antena to get better reception.Go to ur tv menu goto SETUP pick AIR and scan all the DTV free air programs stations.

Jul 06, 2010 | Dell W3706MC 37 in. LCD HDTV

1 Answer

I have a jvc LT-32EX38 lcd Flat television well I have had Dish Network for about two years now and I canceled it. I know my tv has the digital antenna but it will not pick up any stations when I do the...

you didn't say what kind of antenna you have attached to the TV. The antenna is very important and the type of antenna you need is based on where you are in relationship to the television stations in your area. Even being down a hill In the area can be a problem for antenna television. I had to put an antenna in my attic because an in-door antenna could not pick up the signals for the TV stations in my area, I am down a hill.

Jun 04, 2017 | JVC LT-32E478 TV

1 Answer


go to menu select TV settings select add a channel  In the scan boxes  type 1 and 3 or what every you have your Satellite set to  Then hit start scan  The TV will come on reset to channel 3. 

Jan 14, 2009 | JVC LT-32E479 LCD TV

1 Answer

After power outage, TV screen is blank

It sounds funny but, unplug the set for 30 seconds to allow the TV to reset then see if the problem still is there.

Apr 10, 2007 | JVC LT-26WP84 26 in. LCD Television

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75157 Answers

Jaime Hernandez

Level 3 Expert

2334 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a JVC Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides