Question about Husqvarna Sewing Machines
Husqvarna Designer SE machine
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Check that twin stitch width safety is not turned on in the SET menu (use More button at bottom of first screen to access third screen).
Posted on Jul 01, 2008
Hold down the start button and the presser foot pivot buttons at the same time and turn on the power. The machine will make a funny noise and the test screen will come up. You then need to find the sub-menu, I think it says tensions on it but I'm not sure.
Posted on Jan 31, 2009
I had a similar problem a couple of years ago. I finally figured out that I had the straight stitch needle plate (the one with the single hole), rather than the zig zag needle plate (the one with the curved hole). When I changed plates, it worked fine.
Posted on May 27, 2009
Try ebay or contact your local authorized Husqvarna Viking dealer. You can find a dealer closest to you at the Husqvarna Viking website - http://www.husqvarnaviking.com/us/
Posted on Sep 24, 2009
Tips for a great answer:
Jun 03, 2016 | Sewing Machines
Dec 29, 2015 | Husqvarna Sewing Machines
Aug 03, 2015 | Sewing Machines
Oct 15, 2011 | Husqvarna Viking 1
Aug 09, 2007 | Husqvarna Designer I
Oct 01, 2017 | Husqvarna Sewing Machines
27 people viewed this question
Usually answered in minutes!