Question about Toys
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: camera wont turn on.
Main power led to on/off switch is crushed and not enough power gets through.
you have disassemble the camera.
I would think first before tring this.
Remove 3 screws on bottom, 1 in battery compartment, and 1 at very top of usb flap (look good).
Now slide the side piece starting at the usb flap then apply pressure to top and away from unit.
now look for 1 silver and three black screws (facing back and front, look good).
See the big red wire leading to main on off switch if it crushed thats the problem.
I replaced it with a longer piece of wire.
Remember to replace battery door first if it fell off during process.
*TEST NOTE: You can place batteries in and place a penny across the bottom to test before you put it back together.
Posted on Jan 19, 2008
SOURCE: vtech innotab wont turn on
I had this problem. There are two sets of batteries--the AA's and a button battery. The button battery is behind a compartment with a tiny screw. I took out the button battery (which took some work because it was in there pretty tight) and the AA's at the same time. When I put them back in, everything worked
Posted on Jan 11, 2012
I can't give any answers on this but our innotab max has done the same.
Posted on Jan 28, 2015
Tips for a great answer:
Dec 26, 2015 | Computers & Internet
Dec 25, 2015 | Toys
Dec 24, 2015 | VTech Communications INNOTAB 2 PINK
Jan 28, 2015 | Video Game Consoles & Games
Sep 01, 2014 | Vtech InnoTab 3S The Wi-Fi Learning App...
Jan 25, 2012 | Vtech V.reader Reading System
76 people viewed this question
Usually answered in minutes!