Question about Uniden Cordless Phone

Open Question

How do I sync in my handset to the base - Uniden Cordless Phone

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi, I have a DECT2085-3 base with 3 handsets. I would like to add another handset. I bought two used handsets and would like to register them to my original base. I am having trouble with the selecti


In the instructions you need to find how you Sync the base and add that number phone to the base. All have different ways so try the company website on google.

Dec 09, 2014 | Uniden DECT2085-3 Trio Cordless Phone

1 Answer

GE handset 28101 will not sync with base-GE 28129


Unplug power cord from the base for ten or fifteen minutes, this is the only user level operation that you can do to try fixing the problem.

If after resetting the base still do not find the handset, then either the base or the handset is faulty.

If the base works fine with a different handset, then it is the handset.

Sep 14, 2008 | Lands Phones

1 Answer

How do i sync my panasonic phones cordless kx-tga810


335 is the magic code when you want to remove a previous handset or base station registration!
Handset:

1 " (middle soft key) i L i #

2 Enter "335".

3 "Cancel Handset" i #

LThe numbers of all handsets

registered to the base unit are

displayed.

4 Select the handset(s) you want to

cancel, by pressing the desired handset

number. i #
5 "Yes" i # i {ih}
Base Station:

A handset can be registered to a maximum

of 4 base units. A handset can cancel a base

unit that it is registered to. This allows the

handset to "forget" the base unit.

1 " (middle soft key) i N i #

2 "Registration" i #

3 Enter "335".

4 "Cancel Base" i #

5 Select the base unit(s) you want to

cancel, by pressing the desired base unit

number. i #
6 "Yes" i # i {ih}

Dec 23, 2013 | Panasonic KX TGA810 1Line Cordless...

1 Answer

Have a DS6222-4 - bought 2 handsets to replace 2 that have the names of the buttons worn off. Charged the new handsets overnight - screen says "Connecting..." even though they are right next to the base....


If they (hand-sets) have already been synced to a base...

The preferred way is to UN-sync from their OLD BASE.

The manufacturers are SMART ENOUGH to realize
the bases & remotes may not ALWAYS remain associated.

You must first UN-REGISTER any association with their
PREVIOUS EXISTANCE... before you can register these on your base...

Likewise... you WILL BE A LOT HAPPIER if you
UN-REGISTER the REMOTES you are planning
to retire

The numbers are quoting are wireless (remotes).

DS6222-4 Wireless handset Manual:
Results 1 8 of 8

You should also look at the instructions for
your (wired) BASE.

There are at least two ways for EVERY TASK...
(you only need one (your choice)).

Carnac the Magnificent

Jul 01, 2017 | Vtech Lands Phones

1 Answer

Sync


If by "sync a handset" you mean register a handset so it works with the base, then yes. It doesn't even need to be the same model. The manual gives instructions for registering a handset to work with the base. If you need a manual, select the model of your Uniden DECT 6.0 phone from the list beginning at http://www.uniden.com/owners-manuals/dect-phones/scat/dectphones_mnl .

Jun 03, 2013 | Uniden DECT 6.0 Cordless Telephone...

1 Answer

The telephone batteries are fully charged; however when I attempt to use the telephone I receive a message stating, "No link to base. Move closer to base, try again." The telephone is very close...


Check your user's manual for registration, or RE-REGISTER the handset to the base. In essence, it involves stepping to the registration on the handset, pushing the handset locator button on the base, then saying OK on the handset. They will sync up.

Carl

Feb 10, 2011 | Panasonic Lands Phones

2 Answers

How do i sync my vtech CS5111 to its base...please help...


have the main based plugged into a working ac outlet and active telephone line then place phone on base for 1 minute then remove base should sync within that time

Mar 18, 2010 | Vtech Lands Phones

1 Answer

I have a Uniden cordless phone EZI996, The lights on the base are blinking on & off bright red.


Hi.


Try the following procedure to reset and re-sync the phone system:



  • Disconnect all units from power.
  • Remove batteries from all handset.
  • Check all phone connections to base.
  • Check the phone connector underneath the base (RJ11 squared plug).
  • Put back battries on handsets.
  • Place handsets on base.
  • Connect base back to power with handset sitting on base.


If that does not fix the problem , then there is an internal fault. In that case call Uniden to arrange repair or replacement.

Uniden support number for your area is prited inside the user documentation.


Regards.

Dec 05, 2009 | Uniden Cordless Phone

1 Answer

Sync a new handset to kx-tg5632 phone


This works on MY panasonic; May work on yours too!

Registering a handset
The included handset and base unit are
preregistered. If for some reason the
handset is not registered to the base
unit, register the handset.
1 Handset:
{MENU} i {0}{0}{1}
2 Base unit:
Press and hold {LOCATOR/
INTERCOM} until the IN USE
indicator flashes.
LAfter the IN USE indicator starts
flashing, the rest of the procedure
must be completed within 1
minute.
3 Handset:
Press {OK}, then wait until a beep
sounds.
4 {OFF}
Registering an additional handset
See page 5 for information on the
available model.
Start from step 2.

Dec 29, 2008 | Panasonic KX-TG5632 Phone

Not finding what you are looking for?
Uniden Cordless Phone Logo

Related Topics:

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Lands Phones Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

Cindy Wells

Level 3 Expert

5102 Answers

Are you an Uniden Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...