Hp6930p hardware malfunction nmi channel check iochk system has halted. Blue screen. Do the needful

Don't understand your question.

Go to your device manager and check if there is any hardware driver missing or malfucntioning then re-install that driver.

\hi there,
Yes it seams you Memory module has gone faulty. So i would advise replacing it.
Regards

These are possible techniques on how to resolve this particular behavior. Try these subsequent suggestions.

Memory Check - Dislodge extra memory out of the motherboard; run only the module needed to start the system. Reboot the system to see of the error still exist. If the error message does not materialize, the problem is one of the memory cards you have removed from the motherboard. This procedure may take several times since you have to try every RAM to determine what causes the problem. If you have detected that a memory module is defective, replace it.

Adapter Check ?€" Remove installed adapter leaving only the necessary adapter generally a single video adapter and the subsystem controller. Restart the computer to see if the problem sill occurs. Try to reinstall every adapter and reboot the system separately, reboot after every adapter. If the error does not appear after reinstalling each of the adapters, the card may only require to be reseated. Monitor the system to guarantee that the error will not reappear.

Download the latest drivers

Pls try to restore the laptop in last know good config mode.

Hi,
This behavior can occur if a hardware component malfunctions, or if there are damaged or incompatible drivers installed.
Solution is Replace the defective RAM module.
The memory for this laptop is located under the keyboard. You would have to open the keyboard and replace the faulty memory module.

http://support.microsoft.com/kb/315223

Thanks for using fixya
Proton

1/ some time bootable virous and wowm can not give to boot regularly . once time iface same problem i took out harddrive and formated another computer then it worked. 2/ some time old drive cannot boot so we change to new for only bottable purpose.3/ some time we face this problem by bootable cd ,change other to check.4/ some ram can work but not boot so we change while we are going to boot.4/ if cpu fan is damage you should get any kind of message as thermal heat . computer is shuting down thanks (nepal)

increase ur virtual memory then for high resolution game u should install a graphics card , nvidia graphics card is the good quality card . After doing that plz check

HARDWARE MALFUNCTION CALL YOUR HARDWARE VENDOR FOR SUPPORT NMI : PARITY CHECK / MEMORY PARITY ERROR THE SYSTEM HAS HALTED