Question about GE JVM1650 1000 Watts Microwave Oven

1 Answer

Control Panel "clock Buttom" dead

Hi, yesterday after lighting and power restore, the microwave reboot and shows "please push the clock button, etc...", but seems my "clock button" is dead (BTW: I have some other bottom dead also before, like "3", "5", etc).
So I could not do anything with the microwave, not smart design.
Anyway, which part I need to exchange?

WB07X10798
--> CONTROL PANEL ASM
or
WB27X10382 --> ASSY PCB-MAIN
Someone could help on instruction how to change it also?

thank you so much.

Posted by on

  • 1 more comment 
  • jasonsyj Jul 20, 2009

    If I send the whole control panel to you, how much you will charge to repair it? Thank you

  • jasonsyj Jul 20, 2009

    My model is JVM1650BH01, Is WB07X10798 the right one for this problem? If so, is this means I have to change the entire control panel assembly, right?
    Thank you

  • jasonsyj Jul 20, 2009

    If I send the whole control panel to you, how much you will charge to repair it? Thank you

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • GE Master
  • 9,047 Answers

Sounds like your keypad has failed, and on some models it's not available separately, so you have to buy the entire control panel assembly.

You have to remove the controller (see the video here) then unplug the keypad strip (see photo below) then move your circuit board to the new control panel assembly (part #
WB07X10798 if that's the right one for your model).

See exploded views
here. You can find this part for $101.91 here (compared to $163.50 from G.E.!).

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Control Panel

Posted on Jul 20, 2009

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi I have a Samsung SMH9187 micowave that is dead (no display, light, fan, mirowave).


Sounds like the main fuse blew. It's either near where the power cord enters the cabinet, or behind the control panel (if an over the range unit).

You may also have some type of failure in the high voltage circuit; based on your description of the symptoms.

Aug 16, 2014 | Samsung SMH9187ST Microwave Oven

1 Answer

Hi there, I've just moved into a new apartment and the Samsung Timesaver microwave seemed to be working fine yesterday, but it has been beeping at odd times for no reason. I turned the power off to stop...


Hi, this is usually a bad touchpad. The way to tell for sure is to kill power to the unit, take the control panel down and unplug the ribbon connector that connects touchpanel to the clock. Put it back together and reapply power. The clock will just sit there blinking and, obviously, the buttons won't work, either. if the beeping stops, then the touch panel is bad. And If it still beeps, then you have a bad clock.

Apr 03, 2011 | Samsung MC5694 Microwave Oven

1 Answer

The microwave oven has completely gone dead Sharp r-1501c. Yesterday the light was on. I went to turn the light off and to put something in the microwave and it lost all power. I've checked the outlet...


It may be the control panel. What ever you do, don't send the control panel to William Miller. He ripped me off, and I have to dispose of my microwave because he never returned my control panel.
If yours has gone dead completely, it's more cost effective just to replace it. I bought an LG to replace mine.

Mar 08, 2011 | Sharp R-1501 Microwave Oven

1 Answer

MICROWAVE IS DEAD. IT CAME ON FOR 3 SECONDS AND THEN WENT DEAD. NO LIGHTS NO CLOCK NO NOTHING. IT IS BUILT IN OVER THE OVEN. IT WAS MANUFACTURED IN 1998.


sounds like you may have a blown fuse. . remove the 2 screws at the hop thats holding the ventillation grill. remove screw holding control panel. push control panel up slightly and lift out. . there should be another metal sheet covering the opening. remove and your fuse should be right behind that.

Feb 04, 2011 | GE JE1640WA/GA Microwave Oven

1 Answer

Electricity is on because the colon is showing. But we can't set anything, clock, power, etc. . Cannot program anything. Beeper is beeping for two short beeps around every half hour--.


Hello. Try this. Push the clock button. Then enter the time in hours and minutes, THEN push the clock button a second time. Joe

Please give my answer 4 thumbs up since it is on target and also free to you. Thanks. Joe

Oct 05, 2010 | Danby DMW753 Microwave Oven

1 Answer

Ge Over The Range Microwave Oven JVM2050...5 yrs. digital clock working so there's power. inside light out and basically digital key pad seems dead.. we had a few flickers of light and a brief turn of...


We repair these on a regular basis for customers nationwide with our guaranteed $39.95 service with a full one year warranty.

At our Web site, we have a video available showing how to remove a typical over the range control panel assembly in under 5 minutes.

Feel free to contact me directly (and please remind me of your full model number from the tag on the unit) for more free information & help.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

William E. Miller, AS-EET
prototech@usa.net
http://www.microwavedisplay.com
Microwave Oven Control Panel Repair Nationwide

Jun 18, 2010 | GE JVM2050 Microwave Oven

1 Answer

The display works (clock, mode, etc) I can push


We see (and repair) this a lot. The problem is on the control panel, which we regularly repair nationwide by mail for $39.95 postpaid in about a week or so.

At our Web site, you can get details of our service, plus we have a video available showing how to remove a typical over the range control panel assembly in under 5 minutes.

This light failure often occurs when a bulb goes out and the filament shorts, or when the bulbs are removed or installed without first unplugging the oven from the power line. Either can cause such a failure on the controller.

The lights can can be inoperable or stuck on or stuck in "night light" mode. Sometimes this will similarly affect the fan operation or inside light, too.

Feel free to contact me directly (and please remind me of your full model number from the tag on the unit) for more information & help.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

William E. Miller, AS-EET
prototech@usa.net
http://www.microwavedisplay.com
Microwave Oven Control Panel Repair Nationwide

Apr 27, 2010 | Whirlpool GH9176XM Microwave Oven

1 Answer

Kenmore Microwave 63301 - Power, but front panel doesn't operate


You have a failed membrane keypad or the problem may be on the board itself.

We regularly repair such control units for customers nationwide by mail for $39.95 postpaid in most cases in about a week with a one-year guarantee.

Feel free to contact me directly (and please remind me of your full model number) for more information & help.

A full Sears/Kenmore model number has 3 digits, a dot, then 8 more digits, such as ###.########

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

William E. Miller
prototech@usa.net
http://www.microwavedisplay.com

Dec 30, 2008 | Emerson MW8102SS 1100 Watts Microwave Oven

Not finding what you are looking for?
GE JVM1650 1000 Watts Microwave Oven Logo

162 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Microwave Ovens Experts

D. E. Hev

Level 3 Expert

1167 Answers

 Larry
Larry

Level 2 Expert

115 Answers

Shekar Avadhani

Level 2 Expert

61 Answers

Are you a GE Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...