We have water coming out of all taps except the master tub. It does have a light drip when I turn it on.Is there a tub valve somewhere that I missed. Can't get into the wall. Could it be in the attic?

Sounds much like the rubber diaphragm in the water inlet valve is split, which means that as long as the water tap is on you will get that drip drip drip of water into the machine.
You can still use the machine until you fix the problem, but the most obvious short term thing to do is to turn the water taps off when the machine is not in use.
To determine which machine inlet valve is leaking, turn on both taps, then turn off, first the HOT water tap as this is more often than not the least used. If the leaking persists, then it is the Cold Water Inlet Valve you need to replace on your machine.
While this repair can be done by a suitably skilled handyman, I always urge caution, because the average guy may just not have as well instilled "Safety Consciousness" as the professional technician who does this sort of thing all the time.
Remember, you are dealing with 240v A.C. which can deliver a LETHAL shock.......so unplug the power cord when doing any work as the least of safety steps to take. It only takes one forgetful mistake which could result in injury or worse!

Mar 29, 2015 | Fisher Paykel EcoSmart GWL15

1 Answer

Washing machine drips water from top of tub.

THE WATER INLET FILTER IS MISSING , SO IT ALLOWS SOME FRAGMENTOF DIRTS INTO THE SYSTEM......U HAVE 2 LOSSE WATER INLET VALVE AND CLEAN

Feb 24, 2012 | Fisher and Paykel Washing Machines

1 Answer

Washing machine fills with water while sitting idle.

Another problem could be the inlet solenoid is failing to close properly, this could be caused by either an obstruction in the sealing part of the solenoid valve, a damaged or worn out seal or if the water pressure is too low. (some solenoids require water pressure to close off properly). To test this idea turn off the taps when not in use. If the water is still filling the tub, the back flow / syphoning idea may be valid. Also just to rule the idea out, turn off the tap to the machine and remove the inlet hose, if the tap "drips" this "trickle" of water maybe the culprit. If turning off the inlet tap fixes the problem you may need to replace the inlet solenoid.

Jan 08, 2012 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

I have a Fisher Paykel washer that was leaking water into tub; repair people changed cold water valve but it is still leaking; although not as much. Could it be the nozzle spray holding droplets of...

Hi just read your posting.1st try turning the hot water tap off and see if the water continues to come into the tub.If the water continues to come into the tub then turn the cold tap off.If the water stops coming into the tub after the hot water tap is turned off then you need a hot water valve.If the water stops after the cold tap is turned off then the cold water valve is still faulty.Please reply on how you got on and I will help you further.Looking forward to your reply.

May 16, 2011 | Fisher and Paykel Washing Machines

1 Answer

Water leaking (dripping) into the drum when machine is off. Drip is coming from where water dispenses into the machine to fill the drum.

Hi just read your posting.The fault with your machine is a faulty water valve.1st turn off the cold tap to the machine and leave for a couple of hrs.If the dripping stops you have a faulty cold valve.If the dripping does not stop then turn off the hot tap and that should stop the leak.Either way to fix this fault a water valve must be replaced.Or you can stop the drip by just turning the taps off after the washing has finished.Hope this helps and please reply for further help if needed.

Jun 12, 2010 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

Slow drip near back of lid

Hi there.this may be water dripping from the injector tube where the water actually enters the bowl.It is normal to drip for a short while after the machine has just been used but if it is a constant drip then you probably have a faulty inlet valve.Try this,turn off one of the taps & see if dripping stops.if not,turn off tha other tap & see if it stops.this will tell you which of the valves are leaking.You could just turn the taps off after use,that would save having to replace it.Hope that helped you.if not then give more detail if possible please.cheers!

May 29, 2010 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

Water is dripping into the wash tub when not in use.

Turn the taps off when not using it or turn off one tap and see if it stops to work out if it is the cold or hot valve and replace the valve.

Apr 17, 2010 | Washing Machines

1 Answer

Water drips inside tub when washer is not in use. Can't tell exactly where it's coming from or how to get inside the back.

Water valve needs replacing. Determine which one by turning off either hot or cold at the wall and watching to see if drip stops.
Alternatively, just turn off the wall taps each time you finish washing.

Mar 23, 2010 | Estate Washing Machines

2 Answers

Water keeps dripping after machine is turned off.

turn hot water tap off if it still drips replace cold water inlet valve if it stops replace hot water valve

Aug 14, 2009 | Maytag PAV2300 Top Load Washer

1 Answer

Water Dripping

you need a new fill valve, even if you ulplug the washer does it still drip? If yes then you do need a new fill valve. Just turn water off at the wall so your machine don't overfill.

Oct 28, 2008 | Kenmore 24032\24036 Top Load Washer

Not finding what you are looking for?

View Most Popular

Washing Machines

My fisher and paykel GWL15 is dripping water from the top where the water comes from. What is the name of the part that needs to be replaced?

Fisher Paykel EcoSmart GWL15

Open Questions:

0 Answers

Power Short on Machine?

Aug 19, 2017 | Washing Machines

0 Answers

No water pressure on the hot side This is an Attwood cgh10e 3e heater

Aug 19, 2017 | Washing Machines

0 Answers

How can I stop my kenmore 51123 from rolling? Where are the leveling feet on this model?

Aug 19, 2017 | Kenmore Washing Machines

0 Answers

how to release child lock on water system

Aug 19, 2017 | Washing Machines

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey

Level 3 Expert

1456 Answers

yadayada

Level 3 Expert

75051 Answers

Brad Brown

Level 3 Expert

15451 Answers

Have a manual for Washing Machines? Or just drag it here!

6ya staff · Answer 1 · 1/2/2017 12:00:00 AM

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

MARLON KELLER · Answer 2 · 6/1/2008 12:00:00 AM

this is a very common probelm with AM washer you have a bad upper sping bearing and at this point you need to cut your loses and send this one to the washer graveyard because this repair in labor intense

Jack Iaria · Answer 3 · 3/21/2009 12:00:00 AM

Dear FixYa Customer,

First and Always go to the Manufacturer for Parts Compatibility and/or Service!

For a GREAT APPLIANCE PARTS WEB SITE click on the highlighted http:// link that follows...
Same-Day Shipping, Return Any Part
Save When You Do Repairs Yourself! @
http://www.partselect.com/Entry.aspx?

jackiaria

Todd Born · Answer 4 · 4/25/2009 12:00:00 AM

Todd Born

700 Answers

SOURCE: water coming from ice maker freezing down back wall of freezer

check for levelness of the ice maker also make sure that the fill tube is inserted all the way into the unit

Posted on Apr 25, 2009

Keith Fournier · Answer 5 · 7/13/2009 12:00:00 AM

You could/can, but don't forget that (a) there is a good chance of heavy condesation, so size pan appropriately, or drain...and (b) The enclosed space where the drip pan is, is going to get quite warm. Hope this helps

Phatfenders · Answer 6 · 11/27/2009 12:00:00 AM

Phatfenders

21 Answers

SOURCE: Water came out both shower head and tub spout (even w/o spout)

The shower valve is clearly mark "UP" when you look at it from the front.

Posted on Nov 27, 2009

Testimonial: "That's right"

We have water coming out of all taps except the master tub. It does have a light drip when I turn it on.Is there a tub valve somewhere that I missed. Can't get into the wall. Could it be in the attic?

6 Suggested Answers

6ya staff

MARLON KELLER

Jack Iaria

Todd Born

Keith Fournier

Phatfenders

Add Your Answer

Attachments: Added items

Related Questions:

My fisher and paykel GWL15 is dripping water from the top where the water comes from. What is the name of the part that needs to be replaced?

Washing machine drips water from top of tub.

Washing machine fills with water while sitting idle.

I have a Fisher Paykel washer that was leaking water into tub; repair people changed cold water valve but it is still leaking; although not as much. Could it be the nozzle spray holding droplets of...

Water leaking (dripping) into the drum when machine is off. Drip is coming from where water dispenses into the machine to fill the drum.

Slow drip near back of lid

Water is dripping into the wash tub when not in use.

Water drips inside tub when washer is not in use. Can't tell exactly where it's coming from or how to get inside the back.

Water keeps dripping after machine is turned off.

Water Dripping

Not finding what you are looking for?

Washing Machines

My fisher and paykel GWL15 is dripping water from the top where the water comes from. What is the name of the part that needs to be replaced?

Open Questions:

Power Short on Machine?

No water pressure on the hot side This is an Attwood cgh10e 3e heater

How can I stop my kenmore 51123 from rolling? Where are the leveling feet on this model?

how to release child lock on water system

Related Topics:

Ask a Question

Top Washing Machines Experts

Gerry Harvey

yadayada

Brad Brown

Are you a Washing Machine Expert? Answer questions, earn points and help others

Manuals & User Guides

Miele-Washer-Service-Manual-02.pdf....

40068302.PDF. user-manual-NTW4600YQ...

Eurotech man.pdf....

We have water coming out of all taps except the master tub. It does have a light drip when I turn it on.Is there a tub valve somewhere that I missed. Can't get into the wall. Could it be in the attic?

6 Suggested Answers

6ya staff

MARLON KELLER

Jack Iaria

Todd Born

Keith Fournier

Phatfenders

Add Your Answer

Attachments: Added items

Related Questions:

My fisher and paykel GWL15 is dripping water from the top where the water comes from. What is the name of the part that needs to be replaced?

Washing machine drips water from top of tub.

Washing machine fills with water while sitting idle.

I have a Fisher Paykel washer that was leaking water into tub; repair people changed cold water valve but it is still leaking; although not as much. Could it be the nozzle spray holding droplets of...

Water leaking (dripping) into the drum when machine is off. Drip is coming from where water dispenses into the machine to fill the drum.

Slow drip near back of lid

Water is dripping into the wash tub when not in use.

Water drips inside tub when washer is not in use. Can't tell exactly where it's coming from or how to get inside the back.

Water keeps dripping after machine is turned off.

Water Dripping

Not finding what you are looking for?

Washing Machines

My fisher and paykel GWL15 is dripping water from the top where the water comes from. What is the name of the part that needs to be replaced?

Open Questions:

Power Short on Machine?

No water pressure on the hot side This is an Attwood cgh10e 3e heater

How can I stop my kenmore 51123 from rolling? Where are the leveling feet on this model?

how to release child lock on water system

Related Topics:

Ask a Question

Popular Questions

LG washing machine has AWFUL mildew smell

Whirlpool Cabrio Washer Error message code F1

Whirlpool Duet Sport Washer will not drain - F-21 error

F 11 error code on Whirlpool Duet - Serial Communication Error ?

Why is the fault F18 error code on my bosch washing machine flashing?

Top Washing Machines Experts

Gerry Harvey

yadayada

Brad Brown

Are you a Washing Machine Expert? Answer questions, earn points and help others

Manuals & User Guides

Miele-Washer-Service-Manual-02.pdf....

40068302.PDF. user-manual-NTW4600YQ...

Eurotech man.pdf....