Need spark plug for Tecumseh snow blower

Several engines were available, you need to look for the number on your current plug - easiest method.

otherwise, you will need to give the motor manufacturer and nameplate info (Tecumseh SnowKing 8HP?)

In order to order engine you must look-up the engine itself. If this blower still has the original engine then it is a
Tecumseh HSK50-65496
Recoil Part Number TEC590604 Image This item has been discontinued by Tecumseh, part number STE150-003 will work but does not have the handle cup.
Original Tecumseh Part
Replaces Tecumseh 590604 and 590605
Fits Models: H, HS, HSK
For use on Snow King Models
RECOIL STARTER ASSEMBLY TECUMSEH 590420A

correct spark plug gap for 4.3liter 6cylinder 1500 Vandura

.030

Have you gauged the gap correctley

.030

If you need spark plugs and gaps try Sears PartsDirect.com if they cannot help try Parts Tree Repair Clinic one of the two will help.

Drain the gas and carburetor and refill with fresh. Clean the air filter if it is dirty. See if this helps.

Hello,

Have you checked for spark? You have drained the old fuel completely, and added brand new fuel,Right?

Is the spark plug getting wet or is it soaked?

Let me know, we'll get it started.

If you need further help, I’m available over the phone at https://www.6ya.com/expert/matt_8dbc24bf722649ac

go to a farm store near you take the old plug with you and match it up the size with a new one even you don't find the same number look for the one that is the same size.if you still have problems go to contact on Tecumseh.com