Question about Kitchen Appliances - Others
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Globe commercial Meat slicer
Hi, I have working on meat slicer my whole life and can help you.
What normally happens is this. The bearings in the knife hub (this is the unit that the knife attaches to and spins) is starting to fail.
The gear on the knife hub is made out of a fiberous material and the worm gear on the motor is made out of metal, so when the bearings start to fail and cause resitance in the hub, the metal motor gear starts to eat the fiber gear on the hub and eventually wears a big chuck out of it. Then the motor spins free and doesn't make contact with the hub gear.
How you can check if this is the problem is this. You need to keep the power switch on machine in the off position and turn the blade a 1/4 of a revolution. Then turn the machine on, what should happen is that the blade will spin some and stop again.
The proper fix for the machine would be to rebuilt the knife bearing unit and replace the hub gear, motor gear and hardware.
In regards to the Chefmate. This is a design flaw of Globe and I told them about this when the machine first came out! The know is on a steel shaft that goes thru the aluminum body. The steel shaft starts to corode and also rust, then it freeze in the frame. What has to be done is this. This assembly needs to taken about sanded, lubed and put back together. The best way to permently fix this is have a machine shop machine the frame out and install a Oilite Bushing, these are impregnated with oil and it will never lock up again.
Where are you located? Let me know if I can answer any other questions for you.
If you have any other questions, you can call me on my cell 201-274-6274 or e-mail me at firstname.lastname@example.org. Thank you
Posted on Dec 27, 2008
SOURCE: Kneading blade
For Toastmaster parts, service or manuals, go to
And click on "toastmaster" (lower-left portion of the page), it redirects you to a secure webpage where you can register.
Part of the page reads:
"Call toll-free or visit our websites for assistance if you need more help.
Parts & Accessories:
Phone: 1-800-738-0245 (Monday–Friday, 8:30 a.m. to 8:00 p.m., ET)
Service: 1-800-231-9786 (Monday-Friday, 8:30 a.m. to 8:00 a.m., ET)"
If I can be of further assistance, let me know. If this solves the issue, please rate it accordingly.
Thanks in-advance for using Fixya.com,
Posted on Jan 04, 2009
You don't mount the blade inserts to the safety insert. The safety insert is only for storage so that someone doesn't cut themselves. Remove the safety insert then install your selected the blade/insert you wish. When finished place the safety insert back in for - safety.
Posted on Sep 18, 2010
Try on amazon, click here and take a look: Amazon com Rival food slicer blade. I hope this was helpful. Cheers
Posted on Dec 27, 2014
Tips for a great answer:
Feb 01, 2017 | Globe Food Equipment Slicer Plate...
Dec 23, 2016 | Rival Food Processors
Feb 08, 2016 | Kitchen Appliances - Others
May 04, 2014 | Toastmaster Food Processors
Jan 16, 2013 | Toastmaster Kitchen Appliances - Others
Jun 03, 2012 | Food Processors
Oct 09, 2009 | Berkel 827E Gravity Feed Deli Meat Slicer
Aug 31, 2008 | Food Processors
Nov 24, 2007 | Food Processors
87 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: