As soon as I push lock up, I get a number pad waiting for a pass code I don't have. I can't get to anything

Zenith TV unlock [Child lock]
Tune the television to a channel blocked by a child lock. The words "Enter Lock Code" will appear on the screen with four dashes underneath
Press the numbers on the remote control to enter the child lock pass code to unlock your Zenith television. When the code is entered correctly, the blocked channel becomes visible. The words "Enter Lock Code" remain on the screen if the password is not correct

Enter "0000" if you did not change the password on the television prior to enabling the child lock feature. This number is the default pass code for the child lock.
Push "7777" if you changed the pass code for the television but no longer remember the code. This number allows you to bypass the child lock and watch the programming.
Key lock
Press the "Menu" button on the remote control to access the "Main Menu" screen on the television.
Scroll to "Special" using the up or down arrow buttons and press the right arrow button to access the "Special" sub-menu.
Push the up or down arrow button to highlight "Key Lock" and then press the right arrow button.
Press the up or down arrow button to change "Key Lock" to "No" and then press the "Menu" button to save the setting.
Wish to get more? http://electrohelponline.blogspot.com/

On most self-cleaning ovens after you push the clean cycle button you have to tell it how long you want it to clean. Try pushing clean then pushing 3:00 for 3 hrs. If you don't have a number pad try pushing the clean pad several times and see if it cycles through clean levels like low, med or high. Then after you tell it how long to clean hit start. If you don't have a start button the oven should start cleaning after around 5 seconds. It will lock the door and begin the clean cycle. Also remember it takes around an hour for the oven to cool and unlock after the cycle is finished. Hope that helps.

First, push the program button on the power board once. Enter the four to eight

digit code by pressing the numbers on the outer touch pad. Press the lock button on the

lock button on the touch pad to set the code. You will hear a two second long beep when

your code is accepted. If the unit does not beep, too much time has elapsed between pressing

the program button and entering the code. Repeat the programming sequence. Enter your number

to check that it works.

Hello

1. Ensure that there is no disk in the tray.

2. Switch the player off and then back on. This is necessary to clean-boot the firmware.

3. Wait until the main menu page appears and the player stops doing anything.

4. Press the eject button to open the tray. (The button is between the "Power" and "TV Power" buttons at the top of the controller.)

5. Press the eject button to close the tray.

6. Wait while the player searches for a disk.

7. As soon as the "No Disk" message appears at the top left corner do the following.

8. Press the REPEAT button - just above the TV channel selector at the bottom right of the controller.

9. Enter your former region code (Where you bought the player) from the list given below on the number pad.

10. The region code should appear at the top left corner of the screen.

11. Enter a "9" to make the player region free. (Enter a region code if you want to lock the player to another region for some obscure or perverse reason.)

12. Power down and power up again.

13. Play a foreign DVD to verify the change.

you must start entering the code just after the "No Disk" message is shown and before the message disappears. If you miss a number it won't work

Secondly, the REPEAT key is part of the code. All six keys must be entered smoothly as "REPEAT Region code". The entry gets timed out so you can't stop in the middle and restart. Don't bash away like crazy, just do it smoothly and briskly.

If you don't see the "Region number" the first time, don't worry. Just repeat the process. It may take about a dozen tries before you get it to work.

The following are the various region codes.

Region 1 (US, Canada) - 29334

Region 2 (Europe, Middle East, Japan) - 38767

Region 3 (South East Asia, Hong Kong) - 56732

Region 4 (South America, Oceania) - 76884

Region 5 (Russia, India) - 53814

Region 6 (China) - 24462

A link to the Manual is above. Check page 4-18 (57 in the PDF reader) for keyboard removal instructions. Good luck.



http://h10032.www1.hp.com/ctg/Manual/c01602064.pdf

Click on this link or copy and paste the complete link into your browser.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response

You have to unlock from a mobile expertise or try this

*2767*2878# wait until it reboots don"t push any button wait for 5 minutes

Hi and welcome to FixYa. I am Kelly

I could be of much better help with a complete model number I.e. (example 110.XXXXX)

The wait is supposed to be 10 minutes. go back and turn off your breaker by "Physically" pushing it with conviction to the OFF position and wait 10 minutes.

If after 10 minutes the cooktop is STILL locked:

Push the touch pad that looks like a padlock for at least 5 seconds. The lock light should go out.

If it does not go out I will need your model number to go any further.

Thanks for using FixYa and I will be watching for your response.

Kelly

OK, this code is signaling an issue concerning the key pad or control board.

Determine if problem is with the Key Panel or Control by:
1. Pushing CLEAR/OFF pad.
2. Disconnecting Ribbon Cable from control and waiting at least 32 seconds to see if Code recurs

If code recurs, problem is in the control. Replace control.

If code does not recur, problem is with the Key Panel.

You are using a universal keypad and usually the 0 button is "enter" look up directions for the brand keypad you are using

i have the kvt-815dvd and i just did this this morning get any kenwood remote that has a 10 digit key pad on it push the reset button and you have to do this fast as soon as the lights come on saying there is power but before the display lights up press this in this sequence
55
222
2
77 then track next button do it quickly and it will work i tried it a few times a little slower and it didnt work so you have to do it pretty fast i didnt hit enter or anything i just pressed the digits it stands for kcar on the number pad so try it