Question about Sony KDS-R60XBR1 60" Projection HDTV

2 Answers

I get 4 flashing red lights on my sony kdsr60xbr1

No pic and no sound

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

I\The four blinking red lights means that it is the fan!!! It is an easy fix. It is caused by dust in the fan and the fan not working properly as a result and the T.V. overheating. Take off back and carefully take out fan and dust it off. I vacuumed the inside of my T.V. and also blew the fan with compressed air. It now works perfectly. I found this solution elsewhere on the internet and it worked.

Posted on May 22, 2010

  • zapcan59 Feb 02, 2011

    Thanks! After buying a new a lamp and still having a red blinking light, I thought it might be defective, then after realizing it was the standby light I googled problems and found this sight. Your solution worked.

  • Sal O
    Sal O Dec 26, 2013

    thanks!!! It absolutely worked. saved me hundreds in repair bills.

×

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 20 Answers

Four blinks - No vertical Deflection (V STOP), Screen goes to a single horizontal line then the video signal muted. Check IC1509, Q1505. This should be referred to a repair shop as it entails removing ICs (integrated circuits) and soldering new ones back in. Most repair shops will simply replace the entire board. My estimated cost: $400 - $500 (repair shop to replace the board).

Posted on Jul 20, 2009

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

wiqi546
  • 1511 Answers

SOURCE: red light flashing 5 times of kdsr60xbr1

Hello and Welcome to Fixya,
Here are the reasons for which the light blinks 5 times:
If Led blinks 5 times, Diagnosis: White balance failure (Not balanced) Possible causes: Video out (IC7101, 7201, 7301) is faulty (CR, CG, CB board), CRT drive (IC309) is faulty (A board), G2 is improperly adjusted. Symptoms of the problem: No raster is generated, CRT cathode current detection reference pulse output is small.
Check all possibilities one by one. If nothing works out. You might need to have a replacement.

Do rate my solution, If this helps you out.
Regards.

Posted on Jan 18, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sony kdsr60xbr1 problems


Hi, since 2006, you have replaced many parts, why don't you try replacing your TV with new advanced model. Your all problems will automatically fixed

Dec 30, 2013 | Televison & Video

1 Answer

Sony tv modelkv27s46 no pic or sound red light blinks


Generally a flashing red light means that it is time to replace the bulb. My tv would not turn on but had a red flashing light I had never seen before . I entered my model online and was able to find tips on how to trouble shoot and advice on how to order and replace new bulb. Hope this helped

Aug 01, 2011 | Sony Televison & Video

1 Answer

I have a SONY KF-WE50 rear projection tv, a few weeks ago it started to turn the pic and sound off while the green light was flashing around 30 times. After the light finished flashing both the picture and...


the green is the reboot process and is normal.
the red light is an error code indicator.
count the blinks of the red light...it cant be 30 times (I think)
it will blink a sequence, pause, then do it again for a total of three times.
count carefully, it gives you three chances to catch the number it is blinking.

Apr 13, 2011 | Sony Televison & Video

1 Answer

Blink on standby green after awhile then blink red


The blinking green light signals that the inverter board is charging the bulb. If the blinking goes to red it means that this process has failed because either the inverter board is not full operational or the bulb itself has failed.
Most likely you will have to replace the bulb - here it is
http://www.partstore.com/Part/Sony/Sony/KDSR60XBR1/Royal+Philips+Electronics/Philips+Lighting/F93087600RL/New.aspx
If this doesn't fix it then you will have to check the inverter and power boards and replace the failing one.
Here is the ballast/inverter
http://www.partstore.com/Part/Sony/Sony/KDSR60XBR1/Sony/Sony/146893613/New.aspx
Here is the power board
http://cgi.ebay.com/SONY-KDS-R60XBR1-G-POWER-SUPPLY-1-867-733-11-Free-S-H-/120703310513

Mar 27, 2011 | Sony KDS-R60XBR1 60" Projection HDTV

1 Answer

I have replaced the bulb and fan on my sony kdsr60xbr1 and it's still blinking red


Let me know how many times red light blinking to provide you helpful info.

Aug 16, 2010 | Televison & Video

1 Answer

Red light flashing 5 times of kdsr60xbr1 sony so, i have to replace lamp?


Hello and Welcome to Fixya,
Here are the reasons for which the light blinks 5 times:
If Led blinks 5 times, Diagnosis: White balance failure (Not balanced) Possible causes: Video out (IC7101, 7201, 7301) is faulty (CR, CG, CB board), CRT drive (IC309) is faulty (A board), G2 is improperly adjusted. Symptoms of the problem: No raster is generated, CRT cathode current detection reference pulse output is small.
Check all possibilities one by one. If nothing works out. You might need to have a replacement.

Do rate my solution, If this helps you out.
Regards.

Jan 18, 2010 | Sony KDS-R50XBR1 50" HDTV

1 Answer

5 red flashs on power/standby light on kdsr60xbr1 screen blank,


Thats the error for lamp driver error. Which means the Ballast is most likely defective. You can get the replacement ballast for your model at the following link which comes with installation instructions.
http://servicemanuals.vstore.ca/product_info.php/pName/kdfe42a10-ballast-assembly/cName/sony-parts

May 22, 2009 | Sony KDS-R60XBR1 60" Projection HDTV

1 Answer

Power Light Flashing Red


Change the lamp. If red led is flashing 4 times. replace lamp fan.

Apr 22, 2009 | Televison & Video

Not finding what you are looking for?
Sony KDS-R60XBR1 60" Projection HDTV Logo

1,130 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

kakima

Level 3 Expert

102366 Answers

The Knight
The Knight

Level 3 Expert

73619 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...