Question about Dyson Vacuums

1 Answer

My 2 year old Dyson upright stopped sucking. It only works if I use the hose. It has the Orange top. Help please!

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dyson Master
  • 18,394 Answers

Hello,


Possible Problem # 1. Turn the vacuum cleaner upside down so the brush roller is facing upwards. I found the easiest way to work on it is to put it on a counter top or work bench. On the left hand side behind the roller brush you should see a flexible transparent hose that goes from the motor to the agitator housing. This hose actually has a lot of strain on it when the vacuum cleaner is in the vacuuming position with the handle down. When the first few series of Dyson DC07 models came out, they didn't make this hose long enough, so when the handle was in the reclined position, it would put too much stress on the hose, and cause the hose to actually crack, usually right where the end of the hose that goes into the agitator housing. Examine your hose and see if you have any visible cracks in this hose. If you need to you may just remove the entire hose assembly by pulling on it. It will easily come right out of the machine so you can inspect it better. Here's a picture of where the hose usually cracks:




My 2 year old Dyson upright stopped sucking. It on - 12_7_2016_4_39_24_pm.jpg

Posted on Dec 07, 2016

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hose doesn't have suction


Hi Danny,
I am sorry to hear you are having difficulty with your DC18. I understand you have checked for obstructions, however, the problem you are describing sounds like a blockage. Please click on the appropriate link below to view step by step instructions on how to locate and remove a blockage in the wand, hose and the hose inlet. If you prefer we would also be happy to walk you through these checks over the phone. If the problem persists after the recommended trouble shooting steps have been carried out, please call us directly as your machine may need to be serviced by an authorized Dyson technician.

Link to Dyson support page US:
http://content.dyson.com/support/help.asp?article=1049&product=DC18-ALLFLOORS
Link to Dyson support page UK:

http://www.dyson.co.uk/support/dc18/dc18-all-floors/my-machine-is-not-working/machine-not-sucking-picking-up-as-well-as-usual/how-to-wash-filters/wand-suction



If you determine you need further assistance, please call us directly at 0800 298 0298 (UK) or 1-866-693-9766 (US).


Best wishes,


Jessica

Dec 11, 2012 | Dyson DC18 all floors Bagless Upright...

1 Answer

Dyson dc17 animal stopped sucking. brush still


Make sure the flexible hose that connects the beater brush housing up to the connection up by the dust bin is still connected. It could also have a hole in it so check for that as well.

May 23, 2010 | Dyson DC17 Animal Bagless Upright Cyclonic...

1 Answer

Loss of suction in hose


Hi its Darran at Dyson.

It may be worth following the blockage procedure outlined in your user guide or on our website at www.dyson.com and look at our support section.

If this doesnt resolve the issue, its likely that your DC24 is still covered by the 5 year Dyson guarantee as we only started manufacturing the DC24 about 2 years ago.

If you need further help, call us on 0800 298 0298 (UK) or 1866MYDYSON (US).

Kind regards
Darran
Dyson Customer Service

Apr 12, 2010 | Dyson Ball DC24 Bagless Upright Vacuum

1 Answer

Dyson suddenly stopped working. About a week ago it had a suction issue. One of the upright tubes was clogged, cleared it and it worked fine. Today I was vacuuming and it simply powered off. The vacuum is...


Hi its Darran at Dyson.

Sorry to hear you are having difficulties with your Dyson.

So that we can help, please contact our Helpline on 0800 298 0298 (UK) or 1866MYDYSON (US). One of our advisors will be able to run through some simple checks to help resolve the issue.

Kind regards
Darran
Dyson Customer Service

Mar 31, 2010 | Dyson Ball DC24 Bagless Upright Vacuum

1 Answer

My dyson 17 wand does not work. When it is on and you stand it upright it turns off


Hi its Darran at Dyson.

If the suction is good from the base but not from the wand, this would indicate that there is a blockage in the wand handle or hose. To test this, stand the machine upright and release the wand handle. Switch the machine on and test the suction from the top of the wand with your hand. If its poor, remove the wand handle from the hose and try the suction at the top of the hose. If its good here, then there is a blockage in the wand handle.

If the sction from the top of the hose is poor, you can remove the hose to check this for any splits or blockages. If it needs to be replaced, you can buy a replacement online at www.dyson.com.

Alternatively, should you any further help or advice with your Dyson, please contact our Helpline on 1866MYDYSON.

Kind regards
Darran
Dyson Customer Service

Jan 25, 2010 | Dyson DC17 Animal Bagless Upright Cyclonic...

1 Answer

The suction in the hose of my 2 year old Dyson Animal vacuum is compromised. I may have sucked up a small cat toy or something. Regular vac still is fine. The hose "sucks closed" after a few seconds near...


Hi there, it sounds as though the wand handle is blocked. To test this, remove the wand handle from the hose and test the suction at the top of the hose. If its strong here, then you will need to remove the blockage from the wand handle. If the suction is still poor, you will need to remove the hose by pressing in the catch on the hose cuff near the base of the machine and removing any blockages.

I hope that this information is useful to you.

Kind regards
Darran
Dyson Customer Service

Dec 28, 2009 | Dyson DC17 Animal Bagless Upright Cyclonic...

1 Answer

Dyson DC14 won't **** from hose but works fine otherwise


There is probably a clog in the U-bend on the back of the unit at the bottom. Removed with a twist of a plastic screw by a coin or screw driver. If not in the U-bend check in the hose/wand.

Nov 28, 2008 | Dyson DC14 Animal Bagless Upright Cyclonic...

1 Answer

Accessory hose not sucking


Try taking the hose off, and making sure it is not stopped up, either in the hose, or where it attaches. Straighten a wire coat hanger and run down the hose to check for obstructions.

Hope this helps!!!

chad

Oct 08, 2008 | Dyson DC14 All floors Bagless Upright...

1 Answer

Dyson not owrking in upright position


I've had this problem. On the lower left side of the vacuum you need to make sure that is completely attached. Pull the part with the arrow button up and push the compartment down. This will allow suction to continue

Jul 04, 2007 | Dyson DC07 Bagless Upright Cyclonic Vacuum

Not finding what you are looking for?
Vacuums Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dyson Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Samyfam
Samyfam

Level 3 Expert

379 Answers

Are you a Dyson Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...