Question about The Toys
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I was told to put a paper clip or key across both prongs that you plug into the wall. This grounds it out. Then you resync the remote with the black. It worked for me.
Posted on Dec 09, 2009
Just put mine up & it did the same thing. Unplug power. Have remote handy & paperclip. Find reset hole behind remote. Plug in power, red light will flash, hold reset button in until unit stops flashing. Make sure remote is also powered on. Thats it.
Posted on Dec 12, 2009
Testimonial: "Thank You for the help it was the reset button on the back of the remote that I forgot about."
SOURCE: I brought the incredible holiday
this page is for questions about this product http://gemmy.com/customer-service/light-show/light-show-questions-and-answers you may want to use the contact us to email them to request an instruction manual.
also this site has some information that may be useful to you,
Posted on Nov 24, 2010
SOURCE: I purchased the Gemmy Incredible
It doesn't appear so, but you should be able to contact Gemmy directly and get another copy. Try this: gemmy.com/contact-customer-service
I just find this, about, How do I synchronize the remote for my Light Show Trio?
1. Extend the antenna at the top of the Remote Control. 2. Press the reset button on the Control Box. This will activate a flashing LED for approximately 2 minutes. 3. As the LED light fl ashes, insert a straightened paper clip or narrow-tipped pen into the small hole on the back of the Remote Control. This activates the reset button. You should hear a small "click", and the flashing of the LED light will stop. Your Remote Control should now be synchronized. 4. You may now proceed to play your Incredible Holiday Light Show.
Where is the remote for my 4ft Light Show Tree?
The remote is located in the base of the tree, under the last row of branches, in a small compartment. As it is hard-wired to the tree, it is not replaceable.
How can I get multiple Light Show Strands to synchronize?
Connect the strands to each other and then plug one of the end strands into an outlet.
How will my Light Show item operate when it is connected to a timer?
If you have your Light Show set up to a timer, you will have to select the setting on the remote or control box each time thatpower is restored to the item. If you have the Airblown Light Show, the item will inflate once power is restored, but the lights/music will not come on; the button on the control box will have to be pressed. If you have the Light Show Trees, you will have to select the setting you want on the remote. There is no setting that will allow you to bypass pressing a button on the remote or control box.
Hope this helps.
Posted on Aug 24, 2011
it kinda hard to describe where the wall is but when you are climbing the mountain and you have to long jump past the water fall to get to the other side and there should be a little cloud guy to your right and on the wall there should be a hidden wall there that you can jump into it and you will find a slide and its a fairly difficult one to get down.
Posted on Feb 27, 2012
Tips for a great answer:
Nov 21, 2016 | Office Equipment & Supplies
Oct 24, 2016 | Refrigerators
Dec 09, 2015 | Computers & Internet
Oct 16, 2014 | The Learning Company Achieve! Math &...
Jul 26, 2011 | Garmin eTrex Legend GPS Receiver
Dec 12, 2010 | Computers & Internet
Dec 08, 2010 | Gemmy Holiday Lightshow and Timer with...
Jan 06, 2010 | Computers & Internet
Nov 29, 2009 | Gemmy Toys
Nov 28, 2009 | Solar Christmas Tree 6 Outlet Foot Switch...
26 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: