Question about Westinghouse Televison & Video

1 Answer

I have a Westinghouse model dwm55f1y1 brightness is very low and picture not good

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Westinghouse Master
  • 75,066 Answers

Go into the picture/video menu od the main menu (on remote) option of the TV and try adjusting the contrast and brightness values.

Posted on Dec 07, 2016

Testimonial: "Thank for your help but the brightness is adjusted up as far as possible in the menu.Also adjusted the contrast."

  • yadayada
    yadayada Dec 07, 2016

    You must have a problem in the LED picture backlights, this means the entire display must be replaced even if only a few are burned out, if that is the problem, it is a very, very expensive repair. I would just replace the TV, they are so cheap right now that repair would not make sense to me personally, as the cost would be near the cost of new. This is you decision I can only suggest and try to advise.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What else could be wrong with lcd tv that has no video or audio, TCON board has already been replaced?


Fault to its main board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ . In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.

May 06, 2015 | Westinghouse 55 in. LCD HDTV

1 Answer

Dead Pixel Issue?


It must be really hard to get all the pixels in a large screen to be working. I've seen many with a very small number of pixels dead or stuck at one color

May 09, 2014 | Westinghouse Televison & Video

1 Answer

Westinghouse dwm55f1y1 no video


Check and replace the backlight inverter. Contact any service technician. Gopakumar Gopalan Google

Mar 09, 2014 | Westinghouse 55" Class 1080p 120Hz LED...

1 Answer

Westinghouse dwm55f1y1 will not play through receiver


You need to connect a pair of audio cables from the audio out/monitor out ports on the tv to the same input as the cable is connected to.

Jan 05, 2014 | Westinghouse 55" Class 1080p 120Hz LED...

1 Answer

White westinghouse stops showing picture


What is model number? Picture and brightness go out?

The better you describe it the more I can help.

Mar 14, 2012 | Televison & Video

1 Answer

Have lost the manual for my 32" hdTV - the picture


A manual can be downloaded from the Westinghouse legacy site;
http://legacywd.com/manuals.aspx

At this site go to the bottom of page to "Archived-2007"
and click on "Select a product"

Here you will click on "LTV-32w1"

On the page you get click on "LTV-32w1" beside the user guide icon.

The instructions for adjusting brightness is on page 15 for picture parameters off the Main Menu.
Its the first icon.


http://legacywd.com/pdf/15_User_Manual.pdf

Mar 25, 2011 | Westinghouse LTV-32w1 32 in. HD-Ready LCD...

2 Answers

Dim backround and display on westinghouse LTV-40w1 HDC tv


u will have to go into service menu to set sub brightness be carefull u may do more bad than good write down all valus before atempting to adj.

Dec 08, 2008 | Westinghouse LTV-40w1 HDC 40.02 in. LCD...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Westinghouse Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73647 Answers

Jaime Hernandez

Level 3 Expert

2315 Answers

Cindy Wells

Level 3 Expert

5058 Answers

Are you a Westinghouse Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...