Question about Cycling

2 Answers

How do I rise the handle bars on my nishiki anastazi

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Master
  • 80,608 Answers

Consult a local bike shop for the needed parts and cables.

Posted on Dec 07, 2016

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cycling Master
  • 1,260 Answers

The Anastazi comes with a "threadless" headset and stem. The only way the stem can be raised as-is if there are spacers above it, which can be moved to below the stem. Otherwise you need a threadless stem raiser threadless stem raiser Google Search
A shorter stem is another solution that will make the reach to the handlebars easier. Be careful about sliding the seat forward to do so, as that can cause knee problems.

I’m happy to help further over the phone at https://www.6ya.com/expert/donald_f2ed37026a3ac881

Posted on Dec 07, 2016

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I raise the handlebar


HELLO. from the pic. face front of bike,hold wheel tightly between knees,there should be a nut at the top where the handle bars meet to the single shaft undo nut not take out,,,try to shift handle bars left to right while trying to lift up .and this should rise the handle bars to the desired hight.befor completing the re tightning of nut make sure you have ligned up the centre of handlebars with the front wheel . tighten down good and you should be all set .hope this was helpfull .GOOD LUCK.M.M

Apr 21, 2018 | Cycling

1 Answer

How do I adjust the height of handle bars on a Nishiki pueblo bike


According to the manual:

If your bike has a "threadless" stem (fig. 6) your dealer may be able to change handlebar height by moving height adjustment spacers from below the stem to above the stem, or vice versa. Otherwise, you'll have to get a stem of different length or rise. Consult your dealer. Do not attempt to do this yourself, as it requires special knowledge.

If your bike has a "quill" stem (fig. 7) you can ask your dealer to adjust the handlebar height a bit by adjusting stem height. A quill stem has an etched or stamped mark on its shaft which designates the stem's "Minimum Insertion" or "Maximum Extension". This mark must not be visible above the headset.

https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&ved=0ahUKEwiuyuupw8HZAhUEU98KHRk1BaoQFggpMAA&url=http%3A%2F%2Fkhsbicycles.com%2FPDF%2FKHS-Owners-Manual.pdf&usg=AOvVaw1LLFcErB5Fxs_LpkLUwB-K

Feb 25, 2018 | Cycling

1 Answer

How do I raise the handle bars on a nishiki manitoba?


Your bike has a "threadless" fork/stem, which means your options are limited. If there are spacers above your stem they can be moved to underneath it, but typically that will only give you part of an inch. You can also perhaps get a shorter stem, or one that is angled up more. Finally, you can obtain a stem riser:
riser stem Google Search


I’m happy to help further over the phone at https://www.6ya.com/expert/donald_f2ed37026a3ac881

Sep 10, 2017 | Cycling

1 Answer

Proper use of gears on nishiki Alamosa bike?


Try these (Google search for "how to use gears on a multispeed bike":
how to use gears on multispeed bike Google Search

I’m happy to help further over the phone at https://www.6ya.com/expert/donald_f2ed37026a3ac881

Aug 22, 2017 | Nishiki Adult Alamosa Mountain Bike 2013

1 Answer

I need an owner's manual


Have you tried looking on Ebay or going
to their website?

Jun 28, 2014 | Nishiki Womens Montour Hybrid Bike 2013

1 Answer

How do I raise the handle bars on a CCM Nevada FS Comfort Bicycle


http://www.sheldonbrown.com/handsup.html



Simply flipping the stem over or getting one with a different rise and reach might give you the added height you need. In minutes a Bicycle Shop could swap any number of them onto your bike for you to try.

Mar 29, 2011 | Cycling

1 Answer

How do I raise the handle bar height on my Giant Trance


Flipping it over might work, or get one with a higher rise, different reach. Get a bike shop to assist as there are 4 parameters to match up: steerer diameter, handlebar diameter, reach and rise.



Mar 06, 2011 | Giant Trance X4

1 Answer

Can I raise up the handle bars on my 26" Ladies'


No, but a bike shop can assist you in selecting and fitting a stem with a higher rise.


Feb 24, 2011 | Columbia Sportswear Columbia 26" Ladies...

Not finding what you are looking for?
Cycling Logo

Related Topics:

138 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cycling Experts

yadayada
yadayada

Level 3 Expert

80608 Answers

Michial Gueffroy

Level 3 Expert

1138 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

20966 Answers

Are you a Cycling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...