Question about Televison & Video
Check and replace damaged component/s at its horizontal scan output section circuit. Check the LOT (Line Output Transformer) too for damage. Replace the horizontal scan output transistor. Check the input voltage to LOT. If the voltage is absent check the feeder resistor; if any. If you wish to get some details; check the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/ Type in this key phrase " my service table today " in the search box at the top right of the the home page, to get gathered some pages which has the details of practical experiences of the author of that site. The search result will display about 20 Nos of related posts. Press the "All posts" at the bottom of the list, then you can select them one by one.
Posted on Dec 06, 2016
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Emerson TV 19 inch, model TS1995
most liekly these set dont last to long
there is a fuse but that requires taking the set apart, unless you know what you are doing it might not be a good idea with professional help.
but most likely its a total loss since these set are cheaply made and from china.
its would cost more to repair it that to buy a new one.
Posted on Jun 14, 2008
Tips for a great answer:
Dec 28, 2015 | Philips Televison & Video
Feb 08, 2012 | Televison & Video
Direct Code Entry
1. Press and hold the CODE SEARCH
button until the red indicator stays
on, then release the CODE SEARCH
2. Press and release the desired Mode
button (TV, VCR, etc.). The red
indicator blinks, then stays lit.
3. Enter the 4 digit code from the code
tables. Note: after a valid code entry,
the red indicator turns off. For an
invalid code, the red indicator
4. With your device on, press
CHANNEL UP. If the device
responds, no further programming is
required. Note: If some buttons do
not operate your device, try one of
the other codes for your brand.
Feb 17, 2011 | Symphonic ST419B 19" TV
Jan 16, 2011 | Orion1934 19" TV
Mar 17, 2017 | Insignia IS-LCDTV32 32 in. Television
Apr 02, 2008 | Gateway FPD1975W 19" LCD Monitor
Mar 10, 2008 | Televison & Video
29 people viewed this question
Usually answered in minutes!