I woke up to my screen black but circle at bottom is slowly flashing on and off like it is sleeping

6ya staff

• 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

6ya - Get Instant Help

6ya.com

Need repair answers fast Use 6ya to...

Posted on Jan 02, 2017

Vincent Forcier

• 39 Answers

SOURCE: compaq sparo 245552-002

Hi there. I've seen this quite a few times. It might be a couple things, but it sounds like the board has gone bad. Have you done a few tests already, trying another video card, and another ram chip? That's what i would try at first. If you don't get anything from that basic testing, it could be a component that's gone bad on the board, or the bios that went corrupted/bad. Such board are usually just replaced. If you have access to a eeprom programmer, one could just remove (if it's socketed) the bios chip off the motherboard and reprogram it with the bin file meant for that board, that can be downloaded from compaq's website in the support section for that specific pc/motherboard. Else, the board could be replaced with a compatible board of the same format and technology, even if it's not from compaq it's good, as long as it physically fits in the case. Hope that helps a bit ! cheebster.

Posted on Jun 18, 2007

ghel ornido

• 34 Answers

SOURCE: Samsung SP42W4HPX, black semi circle bottom of screen & 3D effect

sir/mam the problem of your t.v is weak picture tube,i have encountered for that kind of problem already.

Posted on Aug 01, 2009

SOURCE: no picture just sound

on startup a television is subjected to severe inrush currents this sometimes results in a blown fuse in the psu stage most often at cold startup...this is the place to start...remove and test psu fuse...take precaution when working on tv as many high voltages exist sometimes even long after power is turned off...avoid the high voltagte thick red lead going into the tv tube or discharge if required the same applies to any high voltage reservoir capacitor/s in the psu stage

Posted on Aug 01, 2009

richard simpler

• 230 Answers

SOURCE: I reformated my computer and had it on hibernate

Hi there
i read your report. OK go to your power options and turn off your hibernate and restart your computer.allot of times after you have reformatted your hard driver. the hibernation doesn't work correctly. Try this tip and let me know how it goes. Thank you for writing to fix ya.

Best Regards Richard

Posted on Dec 03, 2009

SOURCE: Camera has black circle in left bottom of screen,

If it's under guarantee you need to get it repaired, if not under guarantee then for the price of the camera vs the repair I'd get a new camera. If you can do it yourself then there are screens on ebay for 15 and even people selling the camera for 20 or less.

Posted on Jan 07, 2010