Question about Simpson Washing Machines

2 Answers

Hi,i have a Simpson EZI Sensor 6 kg top load it has PU error code, any one knows what this code reflects? Thank you in advance Mike

Thanks, i found the problem, it's a drain pump, i just cleaned i and all good . thanks, hope this will help others. :)

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Simpson Expert
  • 129 Answers

It means pump error. Water is slow to drain or not draining at all. May be a blockage or could be a faulty pump.

Posted on Dec 24, 2016

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Simpson Master
  • 41,467 Answers

Try searching error code thru Google

Posted on Dec 06, 2016

Testimonial: "That's what I am doing now. :) thank you"

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Hi, i have a simpson 9.5 kg ezi set and it has been going out of balance only on light loads, could you please tell me possable cause thank you


Could be the drum bearing. If it's noisy when operating that could indicate the bearing is deteriorating.

Jul 01, 2016 | Simpson Washing Machines

1 Answer

I have a Simpson ezi Top Loader 8 Kg what does a E20 error code mean


Lift the top by unscrewing the screws in the back or remove the back panel and there you will find a code and test sheet. Very easy to follow if you follow it to a T.

Jan 20, 2016 | Simpson Washing Machines

1 Answer

My washing machine goes fine until half way through wash then comes up with error code PU and beeps until I turn it off...will not drain out the water? Simpson encore 556


simpson encore pu Unsolved Problems - Fixya

www.fixya.com/unsolved_problems/simpson_encore_pu
Unsolved problems for simpson encore pu question. Get free help ... My simpson encore 757 shows PU error code. What is this? ... Simpson encore 556. Aug 22 ...

Sep 10, 2015 | Simpson Washing Machines

1 Answer

I have 5.5 kg front loader simpson EZI sensor washing machine,the handle to open the washine machine has gone loose and now can not open my full load of washing from the machine


you need to take the top off turn off the mains supply
and reach down to the door catch behind and manualy open it

if the handle has cracked a the pivot pehaps a flat blate screwdrive and you can carefully release it
youll find a littl preasure to the door will help you then let go and the door will open easier

Mar 02, 2015 | Simpson Washing Machines

1 Answer

My simpson ezi sensor wont agitate


hi just read your posting.Does the machine spin and drain?Please reply with answer and I can help you further.

Jul 14, 2012 | Simpson Washing Machines

3 Answers

Simpson ezi sensor 8.0 kg won't spin lid lock flashes and alarms


Hi
To solve the beeping and lid lock light flashing and the machine not doing a spin dry. Do the following.
I have a SIMPSON EZI SENSOR 8Kg top loader. This is what I did.
WARNING HIGH VOLTAGE. switch the power off and unplug the machine.
DO NOT do this if you are not familiar with working with high voltages.

To get access to the lid lock switch,
1. Remove 2 screws at the rear of the washer.
2. Remove 2 screws at the front of the machine located under the lid and covered by small round plastic plugs.
The top cover can now be raised gently from the front.
3. Remove the 2 screws that hold the lid switch.
4. Remove the clear plastic cover from the lid switch.
5. DANGER HIGH VOLTAGE ( Verify that power is off)
6. Find 2 blue wires these go to a magnetic reed switch (25mm long 3mm Diameter).
Cut the blue wires and discard the reed switch. insulate the ends of the blue wires and push them back into the track in different directions so there is no possibility that they can make contact with each other.
7. Find 2 white wires these go to a set of contacts that are mechanically closed by the solenoid.
8. Pull out the contacts and the 2 white wires.
9. Cut the white wires at the contacts, strip 5mm of plastic off the wires and twist them together, The wires will have corrosion, clean them with sand paper, they must make good contact. I recommend that you solder them together.
10. Insulate them and push them back into the track.
11.Reassemble starting with fitting the clear plastic cover.
Your good to go BUT BUT BUT,

WARNING
The Lid safety protecting during the spin dry cycle will no longer function,
So don't do this if you need the safety of the lid closed during the spin cycle.





Remove 2 screws at the back of the machine

Jul 30, 2010 | Fisher and Paykel IWL12 Top Load Washer

1 Answer

Electrolux/Simpson EZI sensor 5.5 kg machine cycles.


Well I'm an idiot. They did say there was a fast wash, but it specified that it was for extra rinses to help people with detergent allergy etc., but did not give a time for the cycle. They should have said it was the short wash for everyone. I tried it, and it was fine. Thanks anyway. If I ever have a real problem, I'll be back.

Aug 03, 2009 | Electrolux Washing Machines

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Simpson Washing Machines Experts

The Knight
The Knight

Level 3 Expert

73647 Answers

Owen Barnes

Level 3 Expert

867 Answers

Vernon Taylor

Level 3 Expert

2918 Answers

Are you a Simpson Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...